Edelbrock 1795 Installation Instructions

©2005 Edelbrock Corporation

Brochure #63-0335

Catalog #1795

Rev. 2/05

Edelbrock Universal Electric Fuel Pump Relay 

CATALOG #1795

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation.  Most installations can be accomplished with

common tools and procedures.  However, you should be familiar with and comfortable working on your vehicle.  If you do

not feel comfortable performing this installation, it is recommended to have the installation completed by a mechanic.  If

you have any questions or problems, please call our 

Technical Hotline at:  1-800-416-8628, 7:00 am - 5:00 pm, Pacific

Standard Time, Monday through Friday or e-mail us at 

edelbrock@edelbrock.com.

DESCRIPTION:  The Edelbrock Fuel Pump Relay kit is for use with Edelbrock electric fuel pumps.  Use of a relay with

electric fuel pumps ensures proper wiring, which reduces risk of damage to the fuel pump and results in consistent fuel

pressure.  The Edelbrock Universal Electric Fuel Pump Relay Kit may also be used with other electric fuel pumps,

depending on amperage draw.

CAUTION:  DO NOT exceed 25 amps at a continuous draw.  Relay will handle amperage peaks up to 30 amps.

INSTALLATION INSTRUCTIONS:  See the following wiring diagram for proper wiring sequence

.

Edelbrock Corporation • 2700 California St. • Torrance, CA  90503

Tech Line:  800-416-8628 • E-Mail:  Edelbrock@Edelbrock.com

PLEASE fill out and mail your warranty card.  Remember to write the model number of this product in the “Part #____” space.  THANK YOU.

FUEL PUMP WIRING DIAGRAM, PART #1795