Edelbrock 5250 Installation Instructions

EDELBROCK HEAVY-DUTY TIE ROD SLEEVES

Catalog #5250, 5251, 5252

INSTALLATION INSTRUCTIONS

PostScript Picture

(ShockLogo.eps)

Please study these instructions carefully before installing your new Heavy-Duty Tie Rod Sleeves.  

If you have any questions or problems, contact out  Technical Hotline at:  1-800-416-8628, 

7:00 am to 5:00 pm, Monday through Friday, Pacific Standard Time or e-mail us at

edelbrock@edelbrock.com.

These are heavy-duty replacement parts for original tie rod sleeves and install basically in the same

manner as the original stock parts.  See our catalog for complete application listing.  To order a

catalog, please call (800) FUN-TEAM.

1.

Installation of these parts requires precision front-end alignment equipment.

2.

Installation should only be done by a qualified professional.

3.

Following installation, drive vehicle about 10 miles and re-check all nuts for tightness.

Note: It is a good idea to periodically check suspension components for tightness and

potential problems.

Edelbrock Corporation

2700 California St.

Torrance, CA 90503

Technical Hotline:  800-416-8628

Office:  (310) 781-2222

©

2001 Edelbrock Corporation

Rev. 11/01