Edelbrock 8031 Installation Instructions
Page1
Brochure #63-0080
© 2002 Edelbrock Corporation
Rev. 03/02
UNIVERSAL CHEVROLET MOUNTING BRACKETS
PART #8031 AND #8032
INSTALLATION INSTRUCTIONS
Qty.
Description
1
Throttle Bracket - Universal Chevy, Top
1
Throttle Bracket - Standard Chevy, Base
2
¼ - 20 lock nut
2
¼ - 20 x 5/8" bolt
4
¼" washer AN
PLEASE study these instructions completely and thoroughly before installing your new throttle bracket. If you have any questions or problems,
contact our
Technical Hotline at: 1-800-416-8628, 7 am - 5 pm Monday-Friday, Pacific Standard Time or e-mail us at
edelbrock@edelbrock.com.
KIT CONTENTS
PART #8032
The #8032 is designed for small block Chevy's with E-Tec or Vortec
style heads.
1. When using Edelbrock fuel injection, assemble the bracket as seen
below.
2. If you are using a carburetor, assemble the bracket as seen below
left (#8031).
PART #8031
The #8031 is designed for small block or big block Chevy's.
The bracket has the flexibility to provide proper cable adjustment for
carbureted engines or fuel injected engines, with or without cruise
control. Along with a transmission kick-down cable mount location for
all transmission combinations. Below is the most common assembly.
DESCRIPTION
The bracket can be trimmed
along the dotted line if necessary
for vehicles with vacuum cruise
control.
The bracket can be trimmed
along the dotted line if necessary
for vehicles with vacuum cruise
control.
A
B
C
A
B
C
A- Cruise control
B- Throttle cable
C- Transmission kickdown cable
A- Cruise control
B- Throttle cable
C- Transmission kickdown cable