Edelbrock Russell R09761 Installation Instructions

Download

Bookmark us

Rev. 9/06 - BC/mc

Catalog #R09761

Brochure #63-R09761

Catalog #R09761

DOT Racer Front Brake Hose Kit

for 2006 Yamaha FZ1

INSTALLATION INSTRUCTIONS

Remove factory brake hose assembly, noting routing.

Cap off master cylinder and caliper ports.

Install Russell right-side hose banjo with compound

bend onto right caliper so that hose is directed up and

in. Install Russell left-side hose banjo with straight

bend onto left caliper so that hose is directed up and

in. Locate hoses with factory brackets around hose

grommets

(See Fig. 1 and Fig. 2).

Route hoses up through wire retainer to master

cylinder, similar to factory upper hose routing. Install

hoses onto master cylinder with supplied double-

banjo bolt. Left banjo goes next to master cylinder and

bends forward and above right banjo. Orient banjos

towards factory wire hose retainer

(See Fig. 3).

Locate hoses to fork tree near horn at mounting location next to right-side fork using supplied cushion clamp and

factory junction block bracket bolt

(See Fig. 4, view from top).

Check hose clearance throughout entire steering and suspension travel range.

Bleed the system and check for leaks while applying pressure.

Please study these instructions carefully before installing your new Brake Hose Kit. If you have any questions, please call

our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or

e-mail us at Edelbrock@Edelbrock.com.

INSTALLATION INSTRUCTIONS

IMPORTANT NOTE: Do not allow the master cylinder to completely drain of brake fluid at any time during this process.

Also, use care when handling brake fluid, as it can quickly damage finished surfaces (paint, plating, etc.).

Fig. 1

Fig. 2

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

Fig. 3

Fig. 4

Edelbrock Corporation, 2700 California Street, Torrance, CA 90503

Toll-Free Tech Line: 1-800-416-8628

Tech E-Mail: Edelbrock@Edelbrock.com