F.u.n.k.e. TRT800A-OLED Operation and installation - 3.9

Manual is about: Mode-S P/N 800ATC-A-(2xx)-(3xx)

Summary of TRT800A-OLED

  • Page 1

    F f.U.N.K.E . F.U.N.K.E. Means – f abrication · u tilities · n etwork · k now-how · e ngineering operation and installation (dokument-nr. 03.2114.010.71e) p/n 800atc-a-(2xx)-(3xx) trt800a-oled mode-s transponder.

  • Page 3

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 2 document-no: 03.2114.010.71e / revision: 2.00 change history revision date description of change 1.00 04.02.2013 first release 2.00 22.01.2014 change of company name to f.U.N.K.E. Avionics gmbh inserted new em800-cable plan in chapter3....

  • Page 4: Table Of Contents

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 3 document-no: 03.2114.010.71e / revision: 2.00 table of contents 1 general ......................................................................................... 5 1.1 symbols .............................................................

  • Page 5

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 4 document-no: 03.2114.010.71e / revision: 2.00 3.8 antenna................................................................................. 23 3.8.1 antenna selection ...................................................... 23 3.8.2 instal...

  • Page 6: General

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 5 document-no: 03.2114.010.71e / revision: 2.00 1 general this manual contains information about the physical, mechanical and electrical characteristics and about installation and operation of the mode s transponder trt800a. 1.1 symbols a...

  • Page 7: 1.3

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 6 document-no: 03.2114.010.71e / revision: 2.00 1.3 customer support in order to facilitate a rapid handling of return shipments, please follow the instructions of the input guide „reshipment rma“ provided at the service-area within the f...

  • Page 8: 1.4

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 7 document-no: 03.2114.010.71e / revision: 2.00 1.4 features in order to operate the mode s transponder it is necessary to request an icao 24-bit aircraft address at the responsible national aviation authorities. The received code is assi...

  • Page 9: Operation

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 8 document-no: 03.2114.010.71e / revision: 2.00 2 operation 2.1 controls on / off „squawk ident“ activate/ deactivate vfr change active standby squawk select operation mode cursor adjustment dim-regulation rotary knob for adjusting values...

  • Page 10

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 9 document-no: 03.2114.010.71e / revision: 2.00 on/off ► ► switch on press button for approx. 0,5 s switch off press button for approx. 3 s vfr ► ► activate/deactivate vfr squawk (press shortly) store active squawk as vfr/vfrw-squawk (pre...

  • Page 11: 2.2

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 10 document-no: 03.2114.010.71e / revision: 2.00 2.2 on/off switch on: press button for 0.5 s switch off: press button for 3 s 2.2.1 display information after power up after turning-on the display appears as follows (example): if more tha...

  • Page 12: 2.3

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 11 document-no: 03.2114.010.71e / revision: 2.00 2.3 display indications value meaning remarks 7000 active squawk 2000 standby squawk could be changed with active squawk by pressing fl 030 flerr flight level invalid altitude measuring fli...

  • Page 13: 2.4

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 12 document-no: 03.2114.010.71e / revision: 2.00 error indicators pll pll error internal error trx transmit failure check antenna and wiring dc low internal voltage internal error fpg fpga-failure internal error bat battery power too low ...

  • Page 14: 2.6

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 13 document-no: 03.2114.010.71e / revision: 2.00 2.5.2 configure flight-id press (repeatedly) until „stby“ appears press and hold ; while a counter is shown beside the active squawk, release when “change fid” is displayed enter flight-id ...

  • Page 15: 2.7

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 14 document-no: 03.2114.010.71e / revision: 2.00 if no 24-bit address (aa) was defined or entered as “000000“ the transponder operates as a mode a/c transponder, in that case the following modes are possible apart from standby: • a c – „m...

  • Page 16: 2.9

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 15 document-no: 03.2114.010.71e / revision: 2.00 • display standby squawk: press or or use the rotary knob (the vfr-squawk remains active!) example: • now the standby squawk can be adjusted by using the rotary knob and activated with . • ...

  • Page 17: Installation

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 16 document-no: 03.2114.010.71e / revision: 2.00 3 installation 3.1 notes the following suggestions should be considered before installing. The assigned installation company will supply wiring. For diagrams refer to 3.7 wiring. Transponde...

  • Page 18: 3.4

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 17 document-no: 03.2114.010.71e / revision: 2.00 3.4 unpacking and inspection of the equipment carefully unpack the equipment and inspect for transport damages. If a damage claim has to be filed, save the shipping container and all packin...

  • Page 19: 3.6

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 18 document-no: 03.2114.010.71e / revision: 2.00 3.6 equipment connections 3.6.1 electrical connections one 15 pin d-sub miniature connector includes all electrical connections, except for the antenna. Use only an external memory trt800em...

  • Page 20: 3.7

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 19 document-no: 03.2114.010.71e / revision: 2.00 3.6.2 static air port install a silicon soft tube fitting the 5 mm static air hose at the backside of the transponder and secure plumbing with appropriate clamps. 3.7 wiring 3.7.1 conductor...

  • Page 21

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 20 document-no: 03.2114.010.71e / revision: 2.00 (1) ground switch/ fly-gnd if an external ground switch is connected, it must connect this pin to gnd to indicate the on-ground condition. Leave open otherwise. (2) adaptors trt800em & trt8...

  • Page 22

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 21 document-no: 03.2114.010.71e / revision: 2.00 3.7.3 cable plan external memory em800 3.7.3.1 cable plan trt800emrs (older version) to s/n 90932013 dsub 15pol t r t 8 0 0 h / t r t 8 0 0 a * txd rxd fly_gnd supp_i/o gnd open cable ends ...

  • Page 23

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 22 document-no: 03.2114.010.71e / revision: 2.00 3.7.3.2 cable plan trt800emrs (newer version) from s/n 90932114 the external – memory – address-adapter trt800em contains electronic parts and must not be opened. Opening or modifying the c...

  • Page 24: 3.8

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 23 document-no: 03.2114.010.71e / revision: 2.00 3.8 antenna 3.8.1 antenna selection • recommended antennas: see section 3.11 accessories • choose an antenna type compatible with the vehicle and the mounting location. • specified features...

  • Page 25: 3.9

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 24 document-no: 03.2114.010.71e / revision: 2.00 3.9 post-installation check all steering and control functions of the aircraft are to be examined, in order to exclude disturbances by the wiring. The most important factor in the transpond...

  • Page 26: 3.11

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 25 document-no: 03.2114.010.71e / revision: 2.00 3.11 accessories part number description trkabel2 antenna cable 2,5 m (8.2 ft) tnc bnc, rg-142, 1,075 db trkabel3 antenna cable 4,0 m (13.2 ft) tnc bnc, rg-142, 1,72db trkabel4 antenna cabl...

  • Page 27: 3.12

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 26 document-no: 03.2114.010.71e / revision: 2.00 3.12 drawings 3.12.1 dimensions ≈ 8 0 m m 3 8 ,5 m m 160 mm 1 6 1 m m 15 mm 14 mm 140 mm 20 mm 4 1 ,3 m m 148 mm 3 0 m m o 4,3 mm / connector (plug) has to be clamped with both spring locks...

  • Page 28

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 27 document-no: 03.2114.010.71e / revision: 2.00 3.12.2 mounting advices panel cut-out: 160 x 42 mm, horizontal aligned, in viewable and reachable position to the pilot there are three alternative ways of mounting: • mounting directly at ...

  • Page 29

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 28 document-no: 03.2114.010.71e / revision: 2.00 r l 3 8 ,5 148 mm 158 mm 4 0 17 170 3 0 11 1 6 ,7 1 0 kt76 frame removed kt76 rahmen entfernt (mounting-block-set mb800a2) direct panel mounting befestigung direkt am panel (mounting-block-...

  • Page 30: Transponder Settings

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 29 document-no: 03.2114.010.71e / revision: 2.00 4 transponder settings 4.1 overview the trt800a is capable of storing the following information: • icao 24-bit aircraft-address (aa) • aircraft category (ac), • flight identification (fid) ...

  • Page 31

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 30 document-no: 03.2114.010.71e / revision: 2.00 display (example) page 1 aircraft address aircraft category flight identification page 2 speed category ground switch option remote header option page 3 rs-232 settings: protocol, baud rate...

  • Page 32: 4.3

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 31 document-no: 03.2114.010.71e / revision: 2.00 • a gps protocol is set as interface protocol (nmea / freeflight / ar-nav) • gps receiver is connected and transmits data (if not: “pos. :no data” is displayed) • a valid position is transm...

  • Page 33

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 32 document-no: 03.2114.010.71e / revision: 2.00 4.3.3 flight-id (fid) per icao regulation mode-s data must contain a valid flight identification (fid), to ensure that the correlation between flight plan and radar data will work automatic...

  • Page 34: 4.4

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 33 document-no: 03.2114.010.71e / revision: 2.00 4.3.4 reply information – speed category (ri) besides aa, ac and fid another important part of the mode-s data is the speed category of the respective aircraft. This speed category shall be...

  • Page 35

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 34 document-no: 03.2114.010.71e / revision: 2.00 4.4.2 option remote header the transponder provides a trt800rt remote control interface. If a remote header trt800rt is connected transponder can be remote controlled via this interface. Re...

  • Page 36

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 35 document-no: 03.2114.010.71e / revision: 2.00 option description baud rate favisia glass cockpit support favisia data format to be processed in favisia avionics suite. - favisia+gps data format to be processed in favisia avionics suite...

  • Page 37: 4.5

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 36 document-no: 03.2114.010.71e / revision: 2.00 the check for correspondence between the primary altimeter and the trt800a is usually performed every 24 months as part of the aircraft's altimeter checks. Altitude correction is based on s...

  • Page 38

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 37 document-no: 03.2114.010.71e / revision: 2.00 4.5.2 transponder configuration/record structure aircraft related parts of transponder configuration are stored in one out of eight possible records (record=presetting). Each record contain...

  • Page 39

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 38 document-no: 03.2114.010.71e / revision: 2.00 4.5.4 general setup step display (example) 1. Start-up transponder 2. Ensure, the transponder-mode is „stby“. If necessary change the mode by pressing 3. Press a counter is shown at the upp...

  • Page 40

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 39 document-no: 03.2114.010.71e / revision: 2.00 step display (example) 6. With the rotary knob you can select „yes“ if a ground switch is installed, if not select “no” and proceed with step 7 7. At this stage the respective speed categor...

  • Page 41

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 40 document-no: 03.2114.010.71e / revision: 2.00 step display (example) 10. With further records can now be created and configured as described in the aforementioned steps at start-up of the transponder one of the defined records with all...

  • Page 42

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 41 document-no: 03.2114.010.71e / revision: 2.00 altitude correction is based on five interpolation points ( 2000, 10000, 18000, 25000 and 35000 ft).The offset value at each interpolation point can be adjusted in a range from -100 to + 10...

  • Page 43

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 42 document-no: 03.2114.010.71e / revision: 2.00 step display (example) 6. (..9) repeat last step for another 4 altitude levels 10000ft 18000ft 25000ft 35000ft 10. You have now left the configuration mode and are back in normal operation....

  • Page 44: Appendix

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 43 document-no: 03.2114.010.71e / revision: 2.00 5 appendix 5.1 technical data compliance cs-etso-2c112a easa.21o.268 applicable documents cs-etso-2c112a eurocae ed-73b class 1 level 2es eurocae ed-26 rtca do-160d rtca do-178b software-le...

  • Page 45: 5.2

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 44 document-no: 03.2114.010.71e / revision: 2.00 reply transmission frequency 1090 ± 1 mhz rf peak power output ≥ 21 dbw (126 w) at antenna base (with maximum cable attenuation of 1,5 db) squitter (ads-b) transmitted at random intervals u...

  • Page 46

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 45 document-no: 03.2114.010.71e / revision: 2.00 characteristic do–160d sectio n cat. Condition altitude 4.6.1 c1 35 000 ft temperature variation 5.0 c 2°c change rate minimum per minute humidity 6.0 a shock 7.0 a 6 g operational shocks 2...

  • Page 47

    Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 46 document-no: 03.2114.010.71e / revision: 2.00 notes:.

  • Page 48: F.U.N.K.E. Avionics Gmbh

    F f.U.N.K.E . F.U.N.K.E. Means – f abrication · u tilities · n etwork · k now-how · e ngineering f.U.N.K.E. Avionics gmbh heinz-strachowitz-str. 4 de-86807 buchloe germany phone.: +49-8241 80066 0 fax.: +49-8241 80066 99 e-mail: service@funkeavionics.De www.Funkeavionics.De.