F f.U.N.K.E . F.U.N.K.E. Means – f abrication · u tilities · n etwork · k now-how · e ngineering operation and installation (dokument-nr. 03.2114.010.71e) p/n 800atc-a-(2xx)-(3xx) trt800a-oled mode-s transponder.
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 2 document-no: 03.2114.010.71e / revision: 2.00 change history revision date description of change 1.00 04.02.2013 first release 2.00 22.01.2014 change of company name to f.U.N.K.E. Avionics gmbh inserted new em800-cable plan in chapter3....
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 3 document-no: 03.2114.010.71e / revision: 2.00 table of contents 1 general ......................................................................................... 5 1.1 symbols .............................................................
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 4 document-no: 03.2114.010.71e / revision: 2.00 3.8 antenna................................................................................. 23 3.8.1 antenna selection ...................................................... 23 3.8.2 instal...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 5 document-no: 03.2114.010.71e / revision: 2.00 1 general this manual contains information about the physical, mechanical and electrical characteristics and about installation and operation of the mode s transponder trt800a. 1.1 symbols a...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 6 document-no: 03.2114.010.71e / revision: 2.00 1.3 customer support in order to facilitate a rapid handling of return shipments, please follow the instructions of the input guide „reshipment rma“ provided at the service-area within the f...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 7 document-no: 03.2114.010.71e / revision: 2.00 1.4 features in order to operate the mode s transponder it is necessary to request an icao 24-bit aircraft address at the responsible national aviation authorities. The received code is assi...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 8 document-no: 03.2114.010.71e / revision: 2.00 2 operation 2.1 controls on / off „squawk ident“ activate/ deactivate vfr change active standby squawk select operation mode cursor adjustment dim-regulation rotary knob for adjusting values...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 9 document-no: 03.2114.010.71e / revision: 2.00 on/off ► ► switch on press button for approx. 0,5 s switch off press button for approx. 3 s vfr ► ► activate/deactivate vfr squawk (press shortly) store active squawk as vfr/vfrw-squawk (pre...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 10 document-no: 03.2114.010.71e / revision: 2.00 2.2 on/off switch on: press button for 0.5 s switch off: press button for 3 s 2.2.1 display information after power up after turning-on the display appears as follows (example): if more tha...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 11 document-no: 03.2114.010.71e / revision: 2.00 2.3 display indications value meaning remarks 7000 active squawk 2000 standby squawk could be changed with active squawk by pressing fl 030 flerr flight level invalid altitude measuring fli...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 12 document-no: 03.2114.010.71e / revision: 2.00 error indicators pll pll error internal error trx transmit failure check antenna and wiring dc low internal voltage internal error fpg fpga-failure internal error bat battery power too low ...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 13 document-no: 03.2114.010.71e / revision: 2.00 2.5.2 configure flight-id press (repeatedly) until „stby“ appears press and hold ; while a counter is shown beside the active squawk, release when “change fid” is displayed enter flight-id ...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 14 document-no: 03.2114.010.71e / revision: 2.00 if no 24-bit address (aa) was defined or entered as “000000“ the transponder operates as a mode a/c transponder, in that case the following modes are possible apart from standby: • a c – „m...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 15 document-no: 03.2114.010.71e / revision: 2.00 • display standby squawk: press or or use the rotary knob (the vfr-squawk remains active!) example: • now the standby squawk can be adjusted by using the rotary knob and activated with . • ...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 16 document-no: 03.2114.010.71e / revision: 2.00 3 installation 3.1 notes the following suggestions should be considered before installing. The assigned installation company will supply wiring. For diagrams refer to 3.7 wiring. Transponde...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 17 document-no: 03.2114.010.71e / revision: 2.00 3.4 unpacking and inspection of the equipment carefully unpack the equipment and inspect for transport damages. If a damage claim has to be filed, save the shipping container and all packin...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 18 document-no: 03.2114.010.71e / revision: 2.00 3.6 equipment connections 3.6.1 electrical connections one 15 pin d-sub miniature connector includes all electrical connections, except for the antenna. Use only an external memory trt800em...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 19 document-no: 03.2114.010.71e / revision: 2.00 3.6.2 static air port install a silicon soft tube fitting the 5 mm static air hose at the backside of the transponder and secure plumbing with appropriate clamps. 3.7 wiring 3.7.1 conductor...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 20 document-no: 03.2114.010.71e / revision: 2.00 (1) ground switch/ fly-gnd if an external ground switch is connected, it must connect this pin to gnd to indicate the on-ground condition. Leave open otherwise. (2) adaptors trt800em & trt8...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 21 document-no: 03.2114.010.71e / revision: 2.00 3.7.3 cable plan external memory em800 3.7.3.1 cable plan trt800emrs (older version) to s/n 90932013 dsub 15pol t r t 8 0 0 h / t r t 8 0 0 a * txd rxd fly_gnd supp_i/o gnd open cable ends ...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 22 document-no: 03.2114.010.71e / revision: 2.00 3.7.3.2 cable plan trt800emrs (newer version) from s/n 90932114 the external – memory – address-adapter trt800em contains electronic parts and must not be opened. Opening or modifying the c...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 23 document-no: 03.2114.010.71e / revision: 2.00 3.8 antenna 3.8.1 antenna selection • recommended antennas: see section 3.11 accessories • choose an antenna type compatible with the vehicle and the mounting location. • specified features...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 24 document-no: 03.2114.010.71e / revision: 2.00 3.9 post-installation check all steering and control functions of the aircraft are to be examined, in order to exclude disturbances by the wiring. The most important factor in the transpond...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 25 document-no: 03.2114.010.71e / revision: 2.00 3.11 accessories part number description trkabel2 antenna cable 2,5 m (8.2 ft) tnc bnc, rg-142, 1,075 db trkabel3 antenna cable 4,0 m (13.2 ft) tnc bnc, rg-142, 1,72db trkabel4 antenna cabl...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 26 document-no: 03.2114.010.71e / revision: 2.00 3.12 drawings 3.12.1 dimensions ≈ 8 0 m m 3 8 ,5 m m 160 mm 1 6 1 m m 15 mm 14 mm 140 mm 20 mm 4 1 ,3 m m 148 mm 3 0 m m o 4,3 mm / connector (plug) has to be clamped with both spring locks...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 27 document-no: 03.2114.010.71e / revision: 2.00 3.12.2 mounting advices panel cut-out: 160 x 42 mm, horizontal aligned, in viewable and reachable position to the pilot there are three alternative ways of mounting: • mounting directly at ...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 28 document-no: 03.2114.010.71e / revision: 2.00 r l 3 8 ,5 148 mm 158 mm 4 0 17 170 3 0 11 1 6 ,7 1 0 kt76 frame removed kt76 rahmen entfernt (mounting-block-set mb800a2) direct panel mounting befestigung direkt am panel (mounting-block-...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 29 document-no: 03.2114.010.71e / revision: 2.00 4 transponder settings 4.1 overview the trt800a is capable of storing the following information: • icao 24-bit aircraft-address (aa) • aircraft category (ac), • flight identification (fid) ...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 30 document-no: 03.2114.010.71e / revision: 2.00 display (example) page 1 aircraft address aircraft category flight identification page 2 speed category ground switch option remote header option page 3 rs-232 settings: protocol, baud rate...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 31 document-no: 03.2114.010.71e / revision: 2.00 • a gps protocol is set as interface protocol (nmea / freeflight / ar-nav) • gps receiver is connected and transmits data (if not: “pos. :no data” is displayed) • a valid position is transm...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 32 document-no: 03.2114.010.71e / revision: 2.00 4.3.3 flight-id (fid) per icao regulation mode-s data must contain a valid flight identification (fid), to ensure that the correlation between flight plan and radar data will work automatic...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 33 document-no: 03.2114.010.71e / revision: 2.00 4.3.4 reply information – speed category (ri) besides aa, ac and fid another important part of the mode-s data is the speed category of the respective aircraft. This speed category shall be...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 34 document-no: 03.2114.010.71e / revision: 2.00 4.4.2 option remote header the transponder provides a trt800rt remote control interface. If a remote header trt800rt is connected transponder can be remote controlled via this interface. Re...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 35 document-no: 03.2114.010.71e / revision: 2.00 option description baud rate favisia glass cockpit support favisia data format to be processed in favisia avionics suite. - favisia+gps data format to be processed in favisia avionics suite...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 36 document-no: 03.2114.010.71e / revision: 2.00 the check for correspondence between the primary altimeter and the trt800a is usually performed every 24 months as part of the aircraft's altimeter checks. Altitude correction is based on s...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 37 document-no: 03.2114.010.71e / revision: 2.00 4.5.2 transponder configuration/record structure aircraft related parts of transponder configuration are stored in one out of eight possible records (record=presetting). Each record contain...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 38 document-no: 03.2114.010.71e / revision: 2.00 4.5.4 general setup step display (example) 1. Start-up transponder 2. Ensure, the transponder-mode is „stby“. If necessary change the mode by pressing 3. Press a counter is shown at the upp...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 39 document-no: 03.2114.010.71e / revision: 2.00 step display (example) 6. With the rotary knob you can select „yes“ if a ground switch is installed, if not select “no” and proceed with step 7 7. At this stage the respective speed categor...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 40 document-no: 03.2114.010.71e / revision: 2.00 step display (example) 10. With further records can now be created and configured as described in the aforementioned steps at start-up of the transponder one of the defined records with all...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 41 document-no: 03.2114.010.71e / revision: 2.00 altitude correction is based on five interpolation points ( 2000, 10000, 18000, 25000 and 35000 ft).The offset value at each interpolation point can be adjusted in a range from -100 to + 10...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 42 document-no: 03.2114.010.71e / revision: 2.00 step display (example) 6. (..9) repeat last step for another 4 altitude levels 10000ft 18000ft 25000ft 35000ft 10. You have now left the configuration mode and are back in normal operation....
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 43 document-no: 03.2114.010.71e / revision: 2.00 5 appendix 5.1 technical data compliance cs-etso-2c112a easa.21o.268 applicable documents cs-etso-2c112a eurocae ed-73b class 1 level 2es eurocae ed-26 rtca do-160d rtca do-178b software-le...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 44 document-no: 03.2114.010.71e / revision: 2.00 reply transmission frequency 1090 ± 1 mhz rf peak power output ≥ 21 dbw (126 w) at antenna base (with maximum cable attenuation of 1,5 db) squitter (ads-b) transmitted at random intervals u...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 45 document-no: 03.2114.010.71e / revision: 2.00 characteristic do–160d sectio n cat. Condition altitude 4.6.1 c1 35 000 ft temperature variation 5.0 c 2°c change rate minimum per minute humidity 6.0 a shock 7.0 a 6 g operational shocks 2...
Trt800a / p/n 800atc-a-(2xx)-(3xx) operation and installation 46 document-no: 03.2114.010.71e / revision: 2.00 notes:.
F f.U.N.K.E . F.U.N.K.E. Means – f abrication · u tilities · n etwork · k now-how · e ngineering f.U.N.K.E. Avionics gmbh heinz-strachowitz-str. 4 de-86807 buchloe germany phone.: +49-8241 80066 0 fax.: +49-8241 80066 99 e-mail: service@funkeavionics.De www.Funkeavionics.De.