Fetco CBS-2051 Technical Bulletin
NUMBER
TECHNICAL
BULLETIN 20
www.fetco.com
email : techsupport@fetco.com
FETCO
♦ 600 Rose Road ♦ Lake Zurich, IL 60047-0429 USA ♦ Tel. (800) 338-2699 or (847) 719-3000 ♦ Fax: (847) 719-3001
Subject:
Brew Valve Replacement Kit
Date: November 28, 2005
Applies to: CBS-2051, 2052, 2051e, 2052e & 2052e20
Rev. February 23, 2006
The brew valve used on the models listed above has been changed to a compatible valve
from a different manufacturer, Beta Valve. It is a direct replacement for the original valve.
New part numbers have been assigned for the replacement valve kits:
• Part # K054 brew valve replacement kit, 120VAC (For USA/Canada versions)
(Replacement for part # 57042 valve assy.)
• Part # K055 brew valve replacement kit, 230VAC (For EXPORT versions)
(Replacement for part # 57075 valve assy.)
• Part # K057 valve rebuild kit, Beta
(Includes diaphragm, spring, and plunger)
On some brewers, the existing white neutral wire piggy-back connector will not fit on the
new valve. For this reason, a white wiring harness is provided to replace the existing
harness. If the existing piggy-back connector fits, the new wiring harness is not needed.
The ground terminal on the new valve is not used.
NOT USED
(GROUND)
TAPERED END OF
SPRING SHOULD
FACE UP.
TO BREW
BASKET LOCK
TO BYPASS VALVE
TO BREW VALVE
WIRING HARNESS
(REPLACEMENT FOR EXISTING
HARNESS, IF NEEDED.)