Fetco L3D-10 Care Manual

CARING FOR YOUR LUXUS® THERMAL DISPENSER

Before cleaning, be sure that all residual coffee in the dispenser has been 

emptied out. Next, fill the dispenser 1/4 to 1/2 full with hot water. If desired, an

appropriate cleaning solution may also be used.

CAUTION: Never immerse the dispenser or funnel 

completely in water or run through any dishwasher.

Daily Cleaning:

Weekly Cleaning:

First, remove the black funnel

assembly. Then, using a 

cleaning brush, scrub out the

liner thoroughly, loosening 

coffee oils into the water.

Remove the drip tray by

depressing the button on the

back of the dispenser while

pulling forward on the front of

the drip tray.  Discard any 

coffee from the tray. Clean

and rinse the drip tray before

replacing. Empty out the dirty

water through the faucet.

Remove the faucet guard by

unscrewing the lock nut under

the dispenser. Then lift up on

the grey knob under the

faucet and turn the faucet

180 degrees. Pull forward to

remove the faucet. Using a

small brush clean the 

dispense tube and facuet. 

FETCO and  LUXUS are all trademarks or registered trademarks of Food Equipment Technologies Company.

®