3d fpv camera the blackbird 1 user manual.
3d fpv camera the blackbird 1 user manual 2016 fpv3dcam.Com 1 table of contents 1 description and operation ................................................................................................. 2 1.1 product description .......................................................................
3d fpv camera the blackbird 1 user manual 2016 fpv3dcam.Com 2 1 description and operation 1.1 product description stereo video camera blackbird 1 (further in the text "camera" or "product") is designed for generating a video signal in the interlaced 3d format. The camera generates stereo image in re...
3d fpv camera the blackbird 1 user manual 2016 fpv3dcam.Com 3 1.3 equipment table 2 picture name number 3d fpv camera the blackbird 1 1 part lens cap - used to protect the lens from dirt and damage during storage or carrying the blackbird 1 2 part interface cable - connects the blackbird 1 output to...
3d fpv camera the blackbird 1 user manual 2016 fpv3dcam.Com 4 1.4 construction table 3 front view (parts connected) picture 1a back viws (parts disconnected) picture 1b № name number 1 printed circuit board part 1 - main 1 part 2 printed circuit board part 2 - additional 1 part 3 mounting hole 4 par...
3d fpv camera the blackbird 1 user manual 2016 fpv3dcam.Com 5 the product consists of the printed-circuit board with the electronic components and lenses which are installed on it. The board of the camera consists of two parts, the main (1) and additional (2). On the main part there are the interfac...
3d fpv camera the blackbird 1 user manual 2016 fpv3dcam.Com 6 2 intended use 2.1 operating limitations operating temperature of the camera is in the range from -20 to +50 degrees celsius. If you want to use at other temperatures, it is needed to organize additional cooling or heating to ensure an ac...
3d fpv camera the blackbird 1 user manual 2016 fpv3dcam.Com 7 do not connect the video output jack to the audio input. Usually this rca red or white jacks. It does not cause damage, but the image on the monitor / stereo video goggles will not show. As power for the camera it is permissible to use an...
3d fpv camera the blackbird 1 user manual 2016 fpv3dcam.Com 8 2.3 product use camera that is configured and correctly connected starts immediately after power- up. Led ( see table 3, position 8 ) indicates that power is supplied. Before long use of the camera, you have to verify the absence of verti...
3d fpv camera the blackbird 1 user manual 2016 fpv3dcam.Com 9 3.3 configuring convergence convergence is the angle between the optical axis of the lens and the left and right camera. If the optical axis of the lens intersect on a monitored object, in this place will be missing the horizontal offset ...
