Freedom9 freeConnect 2400 Quick Install Manual

freedom9.com

1-888-998-9189

Quick Install Guide

freeConnect 2400

Quick Install Guide for the freeConnect 2400 24-port 10/100 Unmanaged Switch

PACKAGE CONTENTS:

freeConnect 2400

AC Power Adapter

Four rubber feet

Screws and two mounting brackets

CD-ROM with Web Management Utility 

and User’s Guide

The freeConnect 2400 provides an 

easy and inexpensive way to create or 

extend your network. With its 24 

10/100Mbps ports, adding additional 

clients is fast and simple. Its chassis is 

designed to fit into a standard 19” rack 

and only takes up 1U of space, ideal for 

medium to large workgroups.

freeConnect 2400 - S002410000

A.

 HARDWARE INSTALLATION:

B.

 RACKMOUNTING:

C.

 SETUP:

When installing the freeConnect 2400, 

keep the following points in mind:

1. Install the unit in a cool and dry place. 

Refer to the manual for details on 

permissible temperature and humidity 

ranges.

attach the rubber feet included with the 

unit to prevent scratching the surface.

The switch can be mounted in an EIA 

standard-size, 19-inch rack, which can be 

placed in a wiring closet along with other 

equipment. To mount the unit, attach the 

mounting brackets to the switch’s front 

panel (one on each side), and secure 

them with the screws provided (Figure 1).

Once the brackets are attached, use the 

2. Install the unit in a location free from 

electromagnetic interference, vibrations, 

dust, and direct exposure to sunlight.

3. Leave at least 4” (10 cm) of space at 

the front and rear of the unit for ventilation.

4. Install the unit on a strong, sturdy 

surface that can support its weight, or in 

an EIA standard-size rack.

5. When placing the unit on a surface, 

Once the unit has been installed in the 

desired location, connect the power cord 

to the AC power receptacle on the back of 

the unit, and plug the unit into a power 

outlet. Once the unit is powered on, 

connect the network devices to the 

Ethernet ports on the front of the unit.

screws provided with the rack to install the 

unit into the rack (Figure 2).

Figure 1

Figure 2

Revision 1.0