Freedom9 freeView Power 80 Quick Install Manual
freedom9.com
1-888-998-9189
Quick Install Guide
freeView Power 80
Quick Install Guide for the freeView Power 80 8 Port IP Power
PACKAGE CONTENTS:
freeView Power 80
AC Power Adapter
RJ-11 Daisy Chain Cable
Eight (8) RJ-11 to RS-232 Cables
Screws and Mounting Brackets
User Manual and Management
Software CD
The freeView Power 80 allows you to
control the power supplied to up to 8
devices remotely over the internet or via
telephone.
freeView Power 80 - KPM-008M
A.
SYSTEM SETUP:
B.
CONFIGURATION (Continued):
B.
CONFIGURATION (Continued):
C.
CONFIGURATION:
C.
PRODUCT SPECIFICATIONS:
When installing the freeView Power 80,
keep the following points in mind:
! Install the unit in a cool and dry place.
Refer to the specifications for details on
permissible temperature and humidity
ranges.
! Install the unit in a location free from
8. Under the “IP Address” tab, select
“Using Static IP Address” and enter a
static IP Address for the unit.
Note: The IP Address needs to be on the
same subnet as your computer.
9. Click “OK”.
10. Open a web browser and enter the IP
To configure the device, the software on
the CD provided must be installed. To
install the software, follow these steps:
1. Connect your computer using an
Ethernet cable to the freeView Power 80.
Note: A cross-over cable will be required if
the computer is connected directly to the
unit.
2. Insert the CD included in the box in
your CD-ROM drive.
3. Open Windows Explorer and browse to
the CD-ROM drive.
4. Double-click on the file “SNMP
Utility.exe”.
5. Follow the instructions displayed on the
screen to install the software.
6. After completing the installation, start
the software by going to Start Menu -> All
Programs -> SNMP Utility -> SNMP Utility.
7. Select “Configure”.
electromagnetic interference, vibrations,
dust, and direct exposure to sunlight.
! Leave at least 4” (10 cm) of space at the
front and rear of the unit for ventilation.
! Install the unit on a strong, sturdy
surface that can support its weight, or in
an EIA standard-size rack.
Address assigned to the unit in the
Address Bar.
Programmable Power Outlets: 8
Power Output: 125V AC; 15A; 50~60 Hz
(max)
Power Source Input Ports: 1
Power Source Input: 125V AC; 15A;
50~60 Hz (max)
Circuit Breakers: 1 Push Switch
10/100 Ethernet Ports: 1
RS-485 Chain Out Ports: 1
RS-485 Chain In Ports: 1
Telephone Ports: 2
Power Requirements: DC 12V, 2.5A
Temperature Range: 32°F - 104°F (0°C -
40°C)
Humidity: 0% - 95% RH
Dimensions (W x H x D): 17.3” x 5.7” x
1.8” (440 x 145 x 44. mm)
Revision 1.1