Summary of 1200SZ
Page 1
Www.G-lites.Com 1 user manual moving head model: 600sz.
Page 2
Www.G-lites.Com 2 contents introduction 5 1. Packing 5 2. Installation and safety operation 7 3. Lamp replacement 9 4. Power supply & control 4.1 power supply connection & control 11 4.2 signal connection 11 4.3 fixture connection 12 5. Moving head ip code programming 12 6. Moving head ip function s...
Page 3
Www.G-lites.Com 3 important terms: this manual covers important information about installation and operation of this moving head. Please read this manual carefully before installing and operating this moving head. Follow the safety precautions listed below: a. Read this manual carefully and keep man...
Page 4
Www.G-lites.Com 4.
Page 5
Www.G-lites.Com 5 600sz introduction thank you for choosing g-lites products. Our products are created to satisfy your highest expectations and complete quality control. This manual covers important information about installation & operation of this moving head. Please read this user manual carefull...
Page 6
Www.G-lites.Com 6.
Page 7
Www.G-lites.Com 7 2 . Installation and safety operation • installation requirements please make sure to fasten the mounting bracket firmly before installing. The mounting bracket must share the weight 10 multiple weight of the moving heads. • connect the mounting bracket and fix the clamp firmly to ...
Page 8
Www.G-lites.Com 8 o other safety terms maintain minimum distance of 0.80 cm (3.28 feet) from combustible materials. O observe minimum distance to lighted objects of 2.0 meters (6.6 feet) o do not mount on a flammable surface. Keep flammable objects at least 1 meter away from fixture. Do not light ob...
Page 9
Www.G-lites.Com 9 o electric shock & static protection: these moving heads are designed to work and depend on the electric shock protection. The moving head should be connected with the power supply system. The moving head's ground cable should be connected with the ground cable of the power supply ...
Page 10
Www.G-lites.Com 10 lamp features hmi series lamp is a high-voltage recharge lamp. Always be careful when handling the lamp before operating. Please read the following information carefully. Manufacture will not be responsible for misuse or incorrect operation. Warnings: warning 1: disconnect the pow...
Page 11
Www.G-lites.Com 11 warning 5: when the lamp is blackening, cracking, deformed or damaged, let the lamp cool down 15 minutes. If replacement of lamp is needed, read the user manual forwarded by the manufacturer. Warning 6: the inside temperature is much higher under normal working conditions. Do not ...
Page 12
Www.G-lites.Com 12 the moving head's control signal output or input by using the 3 pin or 5 pin xlr pug and socket. If need to lengthen the communication cable. Make sure that both sides of 3-pin plug are one to one (one to one, two to two, three to three). Otherwise, the communication cable will be...
Page 13
Www.G-lites.Com 13 first fixture’s ip code value = (value of the former ip code) + (channel on the controller) note: the first moving head’s starting ip code is 001. Channel number on the controller should not be less than the channel number on the moving head. 6. Moving head ip function selection t...
Page 14
Www.G-lites.Com 14.
Page 15
Www.G-lites.Com 15 8. Dmx channels & photometrics 8.1 channel table 8 bit mode 16 bit mode channel # description channel # description 1 lamp on / reset 1 lamp on / reset 2 dimmer 2 dimmer 3 shutter / strobe 3 shutter / strobe 4 pan coarse 4 pan coarse 5 tilt coarse 5 tilt coarse 6 color wheel a 6 c...
Page 16
Www.G-lites.Com 16 8.2 dmx protocol chart.
Page 17
Www.G-lites.Com 17.
Page 18
Www.G-lites.Com 18.
Page 19
Www.G-lites.Com 19 9. Luminous intensity 10. Gobo and gobo size thickness stainless (0.2mm) / glass gobo (1.1mm) rotating metal gobo wheel a outside (28mm) /inside (22mm) rotating glass gobo wheel a outside (28mm)/inside (21.5mm) fixing gobo wheel b outside (28mm) / inside (20.5mm) white: outside (2...
Page 20
Www.G-lites.Com 20 maintenance this chapter includes information on replacing parts, and cleaning the fixture. This fixture must be serviced by qualified personnel. The information listed in this chapter is intended to assist qualified personnel only. Important information: o disconnect the fixture ...
Page 21
Www.G-lites.Com 21 technical data lamp osram (included): hmi 575w/gs (6000 k). Phillips: msi 575 (5600 k). Average lamp life - 750 + hours (osram/phillip lamp) colour 8 main interchangeable colors (7 + 1 white/ open) + 8 mixed colors. Can freely move clockwise or anticlockwise, fast or slowly. Linea...
Page 22
Www.G-lites.Com 22 dimmer-shutter-strobe 0 – 100% mechanical linear dimming (adjustable from full blanking to full opening effects). 1-7 flashes/second ultra high speed strobe effect. Pan tilt horizontal direction 540° scanning, smooth scanning action and accurate orientation. Vertical 250° scanning...
Page 23
Www.G-lites.Com 23 consumption power consumption: 680 w. Dimension l470mm w365mm h697mm. Weight 43.5 kg..
Page 24
Www.G-lites.Com 24 general troubleshooting this chapter provides information on diagnosing and solving operational problems. If a solution to your problem cannot be found in the following subsections, contact your authorized dealer or led-g technical support. Unit functions but lamp does not strike:...