Galleon VCS-HDCVI User Manual - page 78

Manual is about: H.264 Standalone DVR

Summary of VCS-HDCVI

  • Page 1

    H.264 standalone dvr user manual_v2.08.

  • Page 2: Index

    2 index chapter one products introduce.....................................................................................4 1.1 technical parameter............................................................................................................................ 4 1.2 performance.............

  • Page 3

    3 9.1 instructions of android................................................................................................................... 86 9.1.1 essential condition..........................................................................................................................86 9....

  • Page 4

    4 power this dvr select the adaptor is dc12v; please make sure the power supply voltage before use the machine. If long time do not use the machine, please turn off the power of dvr machine, and let the electric plug away from power socket; ... Safety this dvr only for indoor use, as for prevent sh...

  • Page 5

    5 alarm output 1ch output or 2ch output;varies according to the model recording mode manual recording, timing recording , motion detection recording and external alarm recording simplex/duplex/ triplex triplex(recording, playback , lan transmission) lan rj45(10m/100m self-adapting) ptz control yes c...

  • Page 6: Chapter Two Hardware

    6 requirement. Alarm linkage function 8ch alarm input ( alarm event mode can be set normal open or normal close selection),and turn-by-turn video loss alarm, dynamic detection alarm, the alarm device may be smoke detection censer, temperature detector, ir detector.Possess 4ch relay switch alarm outp...

  • Page 7

    7 ○ 4 fix the screw of hard disk ○ 5 close cover ○ 6 install the screws on both sides of shell 2.1.2 rear panel 4ch item interface description 1 video in 4ch video input 2 audio in 4ch audio input 3 v-out 1ch video output 4 a-out 1ch audio output 5 vga vga monitor 6 hd-out hdmi interface 7 network r...

  • Page 8

    8 item interface description 1 video in 8ch video input 2 audio in 4ch or 8ch audio input 3 v-out 1ch video output 4 a-out 1ch audio output 5 vga vga monitor 6 hd-out hdmi interface 7 network rj45 8 usb first usb for backup or upgrade system of dvr; second usb for mouse 9 on/off power supply switche...

  • Page 9

    9 item interface description 1 video in 16ch video input 2 audio in 4ch audio input 3 v-out 1ch video output 4 a-out 1ch audio output 5 vga vga monitor 6 hd-out hdmi interface 7 network rj45 for internet 8 usb/ mouse first usb for backup or upgrade system of dvr;second usb for mouse 9 on/off power s...

  • Page 10

    10 12 alarm in:16ch alarm input port rs-485:a, b rs485-s a,b alarm out: n1 n2 for alarm output port, every channel connect c and o; port is for gnd; 32ch item interface description 1 video in 32ch video input 2 audio in 8ch audio input 3 v-out 1ch video output 4 a-out 1ch audio output 5 vga vga moni...

  • Page 11: Chapter Three Operation

    11 for example, smoke detector. When you select the external power supply, please share the gnd with dvr; alarm input circuit: alarm inlet connection: 2.1.4 alarm output port 4 way switching value alarm output, selectable in normally open contact, also selectable in normally closed contact, the exte...

  • Page 12

    12 table: s/ n key pad name operating instruction s/ n keypad name operating instruction 1 【 power】 power on/off 8 【 enter 】 【 ok】 this button is used as“enter”and“ok” key in most circumstances 2 【 menu】 access main menu 3 【 esc】 exit operation or enter upper menu close soft keyboard close current w...

  • Page 13

    13 playback 12 【 0~9 10+】 digital input corresponding; channel is magnified in full screen under preview state 13 【 fn】 short cut 6 【 】 playback stop 14 【 】 switching of 1/4/8/9/16/24/32preview mode 【 】 play / pause 15 【 alarm】 alarm reset 【 ▲.▼. 】 four-way to move the focal point in main menu, up a...

  • Page 14

    14 2 right click mouse right click mouse, popping the shortcut menu, as follows; 。 through the menu can be switching preview screen window mode, start replays, ptz control. Four pictures playback mode, the point of the right mouse button, can in a single picture, four pictures, eight pictures (8 roa...

  • Page 15

    15 main menu ptz control wizard language alarm control multi channel display setup recording control exit playback back up if before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk connection! Note: in this dialog you can select language a...

  • Page 16

    16 3.3 shutdown there are two safety mode for shutdown enter【exit】,select【power down】. Abnormal shutdown through the rear panel to shutdown during the dvr running, directly to turn off the power through the rear panel power switch, please avoid as much as possible to do it. (specially while the dvr ...

  • Page 17

    17 the picture, re setting the date. There is a alarm input mode icon. (the meaning of every kind of icon as following table) channel picture attention 3.6 recording operation customer can according to select the different kind of recording mode in this system. For the different kind of recording mo...

  • Page 18

    18 3.7 playback video button description button description synchronous/asynchronous play voice adjustment frame by frame 1/4/8/9/16/24/32 screen(switch image) speed slow hide / display list speed normal recording date speed fast play/pause/stop sound off/on rewind note: 1) during playback the playb...

  • Page 19

    19 3.8 how to control ptz 【 zoom】lens in the current play far closer picture, use the mouse wheel also can undertake variable times control. 【 focus】slight adjusting the focal length 【 iris】aperture size adjustment 【 speed】through the slider adjust rotation stepinterval, yuntai mainly used to contro...

  • Page 20

    20 【 left limit】began to limit scanning settings, was registered date 【 right limit 】, thus set up corresponding limit scanning. 【 add preset】add presets point to the cruise lines. 【 delete preset】cruise lines from deleting preset points. 【 clear tour】remove the cruise line designated. Note : some e...

  • Page 21

    21 3.10 display adjust (1) video 【 video effect】optional: standard, downy, sharp, custom. 【 default】restoring default effect, for custom video effects, copy standard effect parameters. Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc. (2...

  • Page 22

    22 【 device】the first generation of dvr’s optional: vga output, tv output etc display output devices, the system may support multiple equipment and output. The second generation of dvr’s optional:vga output+hdmi output、tv output. 【 resolution】setting the resolution of the display device. The first g...

  • Page 23

    23 (ntsc) continuous adjustable.【audio】can select close, open according to requirements 【 pre-alarm rec】can select close, open according to requirements (2)channel overlay 【 channel】choose the need to install passage "whole" says setting all channels. 【 channel name】can manual corresponding input ch...

  • Page 24

    24 4.2 camera when the system starts the camera will detect the format of video (1) ptz setup 【 channel】choose regional channels, yuntai settings "whole" says setting all channels 【 ptz protocol】yuntai equipment communication protocol it contains these options:pelco_d、pelco_p、lilin、minking、star、vido...

  • Page 25

    25 【 video mode】provide pal and ntsc both formats video formats choice, modify after you must restart your system can take effect. 【 channel】choose to set the video settings area passage "whole" says setting all channels 【 reserved section】click settings enter. The white areas for privacy area 【 buz...

  • Page 26

    26 4.3 network setup (1)general setup 【 dhcp】after checked automatic assignment device will get ip address, subnet mask, the default gateway, the dns server, etc 【 upnp】can choose according to the requirement 【 ip address】network logic address can according to the requirements set 【 subnet mask】serv...

  • Page 27

    27 【 handset port】network phones socket, initial socket for eight thousand eight hundred and eighty eight (2)dial-up setup tip : pppoe dial-up successful, according to 【 pppoe ip 】 shown on ip address, users can remote access hard disk video recorder. By nic lan ip access. The dvr support model: uni...

  • Page 28

    28 (3)ddns setup 【 ddns service 】 dynamic dns provider website, via ddns server, it compatible with soddns,anyvision,pansim, dyndns.Org.If you select soddns, you can customize your favorite domain name.It shows as following picture..

  • Page 29

    29 【 ddns domain】dynamic domain name, soft keyboard and hard keyboard can be input. 【 ddns account】login domain name service provider website user name 【 ddns password】login domain name service provider website password tip : through the dynamic dns server. Support dynamic dns. (4)email 【 ssl protoc...

  • Page 30

    30 according to the customer request can be checked 【video setup 】and 【 motion detection 】 sending emails. Two can also choose. Note : your sender email must support smtp. (5)p2p setup the specific operation of p2p, refer to the eighth chapter “ the cloud function” (6)access control 【 list rule】acc...

  • Page 31

    31 4.4 system setup (1)time 【 system language 】 used in a remote remote device control more hard disk video recorder occasions, only in remote controls address and hard disk video recorder numbers identical to remote operation. 【 device number】according to the requirement to select the time zones, h...

  • Page 32

    32 【 disk full】when video disk full system how to deal with, "said system will be automatic coverage the earliest video files continue covering video," stop video "says system to stop the current video. 【 file time】says automatic generation video files interval, the set range 5-120 minutes. 【 record...

  • Page 33

    33 user has the largest number of eight, user name may not be repeated. 【 user rights】according to the requirements set of functions need checked 【 add user】input need to add user, and input the account password and passwords. According to save button to add user. 【 delete user】select the users need...

  • Page 34

    34 【 buzzer output】in the chosen time intervals have alarm input will start buzzer output. 【 send email】in the chosen time intervals have alarm input which will send relevant information, such as the alarm events, paparazzi pictures, equipment name, device id, etc sent to user specifies the mailbox....

  • Page 35

    35 show the system hardware versions, software version, release dates. Click [software upgrade 】, the system began to automatically detect and upgrade file. Note : equipment currently support upgrades: local usb mode, ie mode, the client software. Usb mode : former ensure usb device to connect upgra...

  • Page 36

    36 (3)default restoring default can restore selected according to need. The system restore to the default configuration state out, can according to the menu options choose to restore the corresponding settings. Tip : menu color, language, time date format, video format, ip address, the user account,...

  • Page 37: Chapter Five Ie Preview

    37 【 exception type】choose abnormalities: hard disk full, hard disk errors, network connection. 【 buzzer】when abnormality, choose whether to allow the buzzer hints. Chapter five ie preview 5.1 logging on interface to input the ip address pretermission ip address is 192.168.0.20

  • Page 38

    38 5.2 system settings point , as the picture ,you can set up language directory,after all to save you set..

  • Page 39

    39.

  • Page 40

    40

  • Page 41

    41 5.3 state control in state control you can set reboot server, close server , remote to go up remote upgrade: let pc file load in the system log: to inquire sometime the server’s action.

  • Page 42

    42.

  • Page 43

    43.

  • Page 44

    44 chapter six asee series phone software for use 6.1 asee this module has mainly instructions on the installation and usage in android, blackberry, iphone mobile phone. 1) the acquisition of client software: the client software can be got from the cd material equipped with cd , then choose english ...

  • Page 45

    45 the mobile phone client of apple mobile phone system (ios)can be directly searched for asee+ in the appstore and installed online. The mobile phone client of android system can be directly searched for asee+ in the android market and installed online. 2) the main functions of the program which is...

  • Page 46

    46 2. Install offline copy the asee.Apk installation package to android phone through cable. In the specified directory find out the corresponding .Apk, click the application installation (if there is not installed apk installer in the mobilke phone, the user needs to download an apk installation so...

  • Page 47

    47 the functions of buttons show as follows: table 1-1 function keys definition function specification play when the program connects with device, play video capture capture the current screen(the default save path: the default pictures directory of mobile) settings set some information of the devic...

  • Page 48

    48 in interface, click button and enter interface, as shown in the above image notes: :it is convenient to identify among multiple devices. :the public ip address, dynamic domain name or lan ip of dvr (the port should be mapping before using public ip and mobile phones need to open wifi before using...

  • Page 49

    49 notes: :back to the screen of previewing image. :it shows the corresponding dvr and the default channel list, the user can arbitrarily choose a channel to preview image. :click this button and enter the “settings” interface, you can editor delete the device information, as shown in the above imag...

  • Page 50

    50 2. Full screen mode is that when mobile phone lay down horizontally it will automatically switch to full screen mode, as shown in the above image 7)channel switch function select some channels in the device list interface, the program will automatically switch to the preview interface and open th...

  • Page 51

    51 6.1.2 instructions of blackberry 6.1.2.1 essential condition 1) support the version 4.6 or above of blackberry system, and mobile phone screen resolution is 480*360 and 480*320. Support 8900, 9000, 9700, 9630, 9900 of blackberry. 2) support dvr platform versions: hisilicon v1.0.1.8 and higher. Gr...

  • Page 52

    52 notes:  before using public ip and mobile phones need to open wifi before using lan ip). :the mobile port set in dvr(default parameter is 8888) . :the actual channel number of dvr. :the username owens view permissions of mobile phone(default username is admin). :the mobile phone port of dvr (def...

  • Page 53

    53 the corresponding functions of buttons in show as follows: function keys definition function specification play when the program connects with device, play video full screen play full screen. Capture capture the current image (the default save path: the default pictures directory of mobile) about...

  • Page 54

    54 zoom out the zoom out control of ptz. Focal length + amplify the focal length of ptz. Focal length - lessen the focal length of ptz. Aperture + amplify the aperture of ptz. Aperture - lessen the aperture of ptz. 6) exit the application program click the button and exit the program, as the below i...

  • Page 55

    55 menu definition function specification set to real-time preview when the program connects with device, play video. New device create a new record. Edit edit record. Delete delete the selected record. Delete all records delete all records. Shutdown shut down the program. 6.1.3 instructions of ipho...

  • Page 56

    56 2)click the program icon asee+ and the initial interface after running procedure is shown in the above image. The corresponding functions of buttons show as follows: function keys definition function specification stop playing when the program disconnects with device, stop playing the video. Capt...

  • Page 57

    57 zoom zoom in/out control of ptz. Focal length focal length adjustment of ptz. Aperture aperture control of ptz. 3)initial usage of need to change the parameter 1.Please click the settings button and enter the device manage interface, as shown in the below image. 2.Then select add button and enter...

  • Page 58

    58 :the mobile phone port set in dvr(default parameter is 8888). :the username permitted to login the dvr(default username is ‘admin’). :the password of the user (default password is empty). :the actual channel number of dvr. 3.After finishing, click , enter interface. As shown in the below image. 4...

  • Page 59

    59 6.Click the button to view all channel numbers, as shown in the above image. 7.Double click any channel, then switch to the interface to preview channels, it can support four channels previewing at the same time, as shown in the below image. 8.Click the button enter the interface, as shown in the...

  • Page 60

    60 ( 2)slide rightly the button to delete the information. As shown in the above image. 4)video display mode there are two modes: common mode and full screen mode switch: when the mobile phone lay down horizontally it will automatically display full screen. Common mode full screen mode 5)channel swi...

  • Page 61

    61 elected the channel button in the , the channels group will switch to 5 ~ 8, 8 ~ 12, 12~16 and circulation switch. As shown in the below image. 6.1.4 instructions of symbian 6.1.4.1 essential condition 1) support the version os s60 or above of symbian system. 2) support dvr platform versions: his...

  • Page 62

    62 2)click the program icon ,the first screen after running is shown in the following figure click ptz show as the following figure the functions of buttons show as follows: function keys definition function specification play/pause when the program connects with device, play video.

  • Page 63

    63 capture capture the current screen(the default save path: the default pictures directory of mobile) settings set some information of the device, such as ip address, dynamic domain name, port, username, password and device alias information. Full screen for this channel full screen. Pervious/next ...

  • Page 64

    64 notes: 1):the public ip address, dynamic domain name or lan ip of dvr (the port should be mapped before using public ip and mobile phones need to open wifi before using lan ip). 2):the mobile phone port set in dvr(default parameter is 8888). 3):the username permitted to login the dvr(default user...

  • Page 65: Chapter Seven

    65 图 6-79 chapter seven instructions of imac 7.1 essential condition 1)support the version os x 10.6.3 or above of imac system. 2)support dvr platform versions: a) hisilicon v1.0.1.20 and higher. B) grain v8.42 and higher. 7.2 installation and operation instructions one method: to unzipped the asee....

  • Page 66

    66 main menu interface after loading,enter default main menu interface,buttons instruction as show below: buttons instruction button icon corresponding definition function introduction single picture single picture shows video channel 4 pictures 4pictures show video channels disconnect disconnect si...

  • Page 67

    67 add add device delete delete device modify modify device switch pictures on imac platform,click view->scream mode on the top of the screen to switch pictures from 1/4/9/16, as the following figure shows: picture switch first login ,preview interface is empty, need to set parameters and add device...

  • Page 68

    68 device name:the name of monitor device,help you distinguish between multiple devices ip address:the public ip address or dynamic domain name of dvr(here the address must be internet address) port:the mobile phone port set in dvr,default parameter is 8888 user name:default username usually to be ‘...

  • Page 69: Chapter Eight

    69 connection play interface if there is error device information above,click to modify or click ,add the device again. Note:asee on imac platform can only add one device,and there is no ptz control function. Chapter eight the cloud funtion 8.1 dvr setup 1.Main menunetwork setupp2p setup.

  • Page 70

    70 click the button”registration” if there is no network, it will prompt”registration failure”; if you have access to the internet, it will prompt " registration is successful!”;.

  • Page 71

    71 click the button “ok”.If success,you will see the following picture. Note:if use the function of p2p, you’d better not use the function of “dhcp”,at the same time to ensure that the ip address is a network ip address , and different with the others...

  • Page 72

    72 8.2 pc setup 1.Opne ie, type http://www.Soddns.Com in the address bar, and then press enter. If this is the first landing, you should download the control according to your pc system. If the system is xp, click the button “xp download”; if the system is windows 7,click the button “win7 download”....

  • Page 73

    73 click the button “run” or “save”; click the button “run”;.

  • Page 74

    74 click the button “next”; click the button “install”;.

  • Page 75

    75 click the button “finish”; note: if finish, you should reboot the pc..

  • Page 76

    76 ★ domain name /device id:you can look up the device id of this dvr ,above device’s id is 10257027; ★ net port:5050; ★ dvr username:admin; ★ password:null; note:the username and password are the same as the local dvr’s 2.Type the information, and then click the button”login”;.

  • Page 77

    77 if you want to view all the channel ,you can view one by one ,or view all the channel by click the button”start”; 8.3 the other operation of pc 8.3.1 user login.

  • Page 78

    78 (1) local login ★ logout: logout the current user ★ cancel:cancel the operation (2) cloud login ★ username: the account can manage multi device id ★ password: manage user password ★ auto-login: when you select this option, open www.Soddns.Com, automaticlly login ★ regist: here you can get the acc...

  • Page 79

    79 registration page successful registration information 8.3.2 server list: shows the currently logged in equipment 8.3.3 device manager.

  • Page 80

    80 ★ device name: the name of the device ★ net address: enter the id of the device ★ net port: default 5050 ★ mob port: default 8800 ★ dev port: default 5040 ★ user: default admin ★ password: default null ★ device type: according to the actual type of the device,such as dvr ★ chn count: the number o...

  • Page 81

    81 8.3.5 remote output control 8.3.6 remote color: you can adjust the color of each channel,you will see it in the following picture ★ default: set the current color to the initial values.

  • Page 82

    82 8.3.7 remote playback ★ type: it include “all”,”manual”,”auto”,”alarm” ★ chn: slecet the playback channel ★ search: search the files and display the results ★ hide: hidden the file directory ★ show filelist: shows the last retrieved file derectory.

  • Page 83

    83 ★ playback: double click the file, and then playback ★ backup: in the file list, select one file, click the right mouse, then click backup, it will pop-up “save as ” dialog..

  • Page 84

    84 8.3.8 window select:you can switch between the single-screen, four, nine, siteen images.

  • Page 85

    85 8.3.9 taskbar.

  • Page 86

    86 chapter nine the use of p2p phone software nvplayer this manual has mainly instructions on the installation and usage in android and iphone mobile phone. 1) the acquisition of client software: the client software can be got from the cd material equipped with cd . Each type of corresponding client...

  • Page 87

    87 1. Install offline copy the nvplayer.Apk installation package to android phone through cable. In the specified directory find out the corresponding .Apk, click the application installation (if there is not installed apk installer in the mobilke phone, the user needs to download an apk installatio...

  • Page 88

    88 1)click the program icon ,the first screen after running is shown in the following picture. Notes: : here you can add multiple devices. :here you can edit the devices,such as delete one device in the server list. :some devices landing..

  • Page 89

    89 :search mobile devices within the lan, currently only supports searching ipc. :display the current list of the servers that have been added. 2) in interface, click button and enter interface, as shown in the followong picture. Notes: :name easy to distinguish multiple devices,name can be the same...

  • Page 90

    90 4) click one of them, it will show the following picture. The functions of buttons show as follows: function keys definition function specification pause when the program connects with device, pause video esc go to the previous level..

  • Page 91

    91 previous group it can show the previous channels group. Next group it can show the next channels group. Select channel choose one video channel of the device. And cooperate with "next group" can switch 5-8,9-12,13-16 and so on. 9.2 instructions of iphone 9.2.1 essential condition 1)support the ve...

  • Page 92

    92 2. Install online run the app store program of iphone. Switch to the search tag page, and input nvplayer in the search box to find the application installation package, then click .After finishing installation, there will be nvplayer program icon on the mobile phone desktop, as shown in the above...

  • Page 93

    93 notes: : here you can add multiple devices. :here you can edit the devices,such as delete one device in the server list. :some devices landing. :search mobile devices within the lan, currently only supports searching ipc. :display the current list of the servers that have been added. 2) in interf...

  • Page 94

    94 notes: :name easy to distinguish multiple devices,name can be the same as the server. :in the p2p interface of the dvr, click the button “registration”, it will create one device id, you can copy the id to here. :the default port is 8800,do not modify. :the username permitted to login the dvr(def...

  • Page 95

    95 4) click one of them, it will show the following picture. The functions of buttons show as follows: function keys definition function specification.

  • Page 96

    96 pause when the program connects with device, pause video esc go to the previous level. Previous group it can show the previous channels group. Next group it can show the next channels group. Select channel choose one video channel of the device. And cooperate with "next group" can switch the 9 to...

  • Page 97

    97 dvr reboot; ② please check the power supply of dvr, if you installed a lot of hard disk drive, it may be reboot repeatedly underpower; ③ please pull up the network cable, then to check the dvr can work normally or not, being the catastrophe failure in network, it will cause the dvr reboot repeate...

  • Page 98

    98 ② the record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic raising; postscript 1 d1、cif models product parameter table 4ch 8ch 16ch 24ch 32ch compress standard h.264 baseline profile@l3.1 video in bnc ( 1.0vp-p/75Ω) bnc ( 1.0vp-p/75Ω) bnc ( 1.0vp-p/...

  • Page 99

    99 record record record record record mult mode record,play, internet record,play, internet record,play, internet record,play, internet record,play, internet hd interface hdmi: 1080p(1920*108 0) hdmi: 1080p(1920*108 0) hdmi: 1080p(1920*108 0) hdmi: 1080p(1920*108 0) hdmi: 1080p(1920*108 0) network i...

  • Page 100

    100 ( kg) disc) disc) disc) disc) disc) postscript 2 960h model product parameter table 4ch 8ch 16ch compress standard h.264 baseline profile@l3.1 video in bnc(1.0vp-p/75Ω) bnc(1.0vp-p/75Ω) bnc(1.0vp-p/75Ω) video out 1tv bnc(1.0vp-p/75Ω)/ 1vga 1tv bnc(1.0vp-p/75Ω)/ 1vga 1tv bnc(1.0vp-p/75Ω)/ 1vga pi...

  • Page 101

    101 hd interface hdmi: 1080p(1920*1080) hdmi: 1080p(1920*1080) hdmi: 1080p(1920*1080) network interface rj45(10m/100m) rj45(10m/100m) rj45(10m/100m/1000m) mobil platform naway.Cab;symbian v3;symbian v5;naway-android;iphone,blackberry rs485 ptz control ptz control ptz control communication port rs485...

  • Page 102

    102 product warranty card all the products sold are covered by 12months warranty from the date of invoice. Warranty instructions: 1. Please contact us when the product is caused by its own fault within 1year warranty. 2. Please mail us your written warranty card as soon as possible after purchasing ...