GameChanger plus pedal User Manual

Summary of plus pedal

  • Page 1

    Plus pedal sustain unit for all melodic instruments user’s manual the plus pedal was created by a small, but dedicated team of engineers, musicians and, above all, friends. We named this team gamechanger audio in order to make one thing absolutely clear – we are not interested in building “boutique”...

  • Page 2

    Real time audio sampling: this method of sound synthesis is called real time sampling and it was developed specifically for plus pedal by gamechanger audio. “real time audio sampling” ensures that each sustained note or chord will retain the exact character of your instrument and faithfully reflect ...

  • Page 3

    5 4 external rotary control knobs - adjust the dynamic properties of the wet signal generated by plus pedal. (see section “knobs and controls”) 1 two-position slide switch, labeled “single and group”: lets you go between two distinct modes of playing (see section “single mode and group mode”) 1 two-...

  • Page 4

    When all 5 slots are filled up – each new slot will be blended in on a rotational basis – slot number 6 will replace the 1st slot; slot 7 replaces the 2nd slot, and so on. (note) the maximum number of slots slots can be adjusted in “group mode” - let’s take a little detour: single mode and group mod...

  • Page 5

    9 outputs and split/mix switch the plus pedal features two ¼ inch output jacks labeled “out” and “clean out/fsw”. There is also a toggle switch on the pedal’s side, labeled split & mix. “out” is the plus pedal’s main output which can send two kinds of signal: 1) the combined dry signal coming from y...

  • Page 6

    11 footswitch the wet only footswitch serves as a remote foot-controller that bypasses the split & mix toggle switch on the plus pedal’s side panel, thus letting you switch in and out of the wet only mode on the fly. This flexibility allows you to build up a rich layer of ambient sound effects and t...

  • Page 7

    Fx loop plus pedal features a very easily accessible fx loop that allows you to channel the isolated wet signal through other external effects units. The fx loop does not have a separate on/off toggle switch – simply connect any effects device to the plus pedal via the send and return jacks and swit...

  • Page 8

    15 in return input type 1/4” unbalanced ts input impedance 1mΩ max input level +6.8dbu out clean out send output type 1/4” unbalanced ts output impedance 100Ω max output level +6.8dbu max adc input -1.8dbu max dac output +5.2dbu sample rate 26khz a/d d/a conversion 16 bit frequency response analog/d...