H-P Products 6970g Instruction Manual - page 5

Manual is about: FOR P/N 6970g, 6971g & 6972g, 7160, 7161 & T210

Summary of 6970g

  • Page 1

    Instruction manual turbine powerhead for p/n 7160, 7161 & t210 hand held turbine powerhead for p/n 6970g, 6971g & 6972g these turbine powerheads have been carefully designed and manufactured for long life, reliable performance and convenient cleaning. They are designed to do most of the cleaning wor...

  • Page 2

    Instructions for turbine powerhead (a) attaching the turbine powerhead to attach your metal wand, simply twist into powerhead elbow until it fits snugly. The built-in, locking mechanism will prevent the wand from coming loose from your powerhead while in use. To detach wand, depress tab on side of e...

  • Page 3

    (e) removing the drive belt and brush “it is recommended this procedure be performed by a qualified service technician.” should the drive belt or brush become clogged with debris or need replacing: 1. Turn off vacuum system and disconnect powerhead. 2. Remove belt cover as described in procedure c. ...

  • Page 4

    Page 4.

  • Page 5

    Instructions for hand held turbine powerhead (a) attaching the hand held turbine powerhead to attach your metal wand and/or curved hose handle simply twist into hand brush neck until it fits snugly. (see fig. 1). To detach wand or curved hose handle, simply hold neck of hand held powerhead and pull ...

  • Page 6

    (e) belt replacement remove brown base plate and belt cover (right side of powerhead) by removing screw. (see fig. 4). Next, remove belt from pulley (may help to turn cleaning brush backwards slightly.) (see fig. 5). Pull belt and brush assembly out and replace belt. Before replacing base plate and ...

  • Page 7: Trouble Shooting Turbine

    Other repairs for repairs or service beyond those described above, please contact your servicing distributor or dealer. Limited warranty h-p products, inc. Warrants that the turbine powerhead and the hand held turbine powerhead, when used for household purposes, pursuant to seller’s instructions, wi...

  • Page 8

    Part number turbine powerhead item part description 7160 7161 t210 1 lower housing 7211-01 same 7211-02 2 wheel (2) 7212-01 same 7212-02 3 sa turbine 7213 same same 4 belt cover 7214 same same 5 base plate 7215 same same 6 compr. Spring 5958 same same 7 washer 5974 same same 8 washer, elbow seal 597...

  • Page 9

    Page 9.

  • Page 10

    Hand held turbine powerhead item no. Description 1 swivel 6321-1 2 sub assembly 6322 turbine and shaft 3 belt 6323 4 swivel seal (2 req.) 6324 5 latch spring 6325 6 latch 6326-1 7 housing, assy. Half 6780-1 8 label 7054 9 slide valve 6328-1 10 sub assy. Housing, half/belt side 6757-1 11 belt cover 6...