H&S XRT Pro Installation & Operation Manual - page 44

Other manuals for XRT Pro: Installation & Operation Manual

Summary of XRT Pro

  • Page 1

    1-888-628-1730 • xrt pro installation manual 1 1-888-628-1730 • xrt pro installation manual 1 rev: 04.02.13.

  • Page 2: Warning!

    2 xrt pro installation manual • www.Hsperformance.Com warning! This is a high performance product to be used at your own risk! Do not install this product until you have read and fully understand the following disclaimer of liability. The fol- lowing disclaimer of liability sets forth the terms and ...

  • Page 3

    1-888-628-1730 • xrt pro installation manual 3 limitation of warranty h&s performance, llc (“seller”) gives limited warranty as to the description, quality, merchantability, fitness for any prod- uct’s purpose, or any other matter of seller’s product sold herewith. The seller shall be in no way resp...

  • Page 4: Table Of Contents

    4 xrt pro installation manual • www.Hsperformance.Com table of contents bill of materials ................................................................................................ 5 parts descriptions ...............................................................................................

  • Page 5: Bill Of Materials

    1-888-628-1730 • xrt pro installation manual 5 bill of materials the list below includes by name the major parts included in your xrt pro package. 1. Xrt pro • micro sd card (in xrt pro) 2. Obdii adapter harness 3. Usb adapter 1. 3. 2..

  • Page 6: Parts Description

    6 xrt pro installation manual • www.Hsperformance.Com parts description this section describes each of the parts in the bill of materials, the descriptions provide a physical set of attributes and a purpose for each part. The parts descriptions also list everything that is included in each assembly....

  • Page 7: Section 1

    1-888-628-1730 • xrt pro installation manual 7 1-888-628-1730 • xrt pro installation manual 7 xrt pro operating instructions these operating instructions are split into sections: • section 1 : button navigation • section 2 : install download • section 3 : changing power levels • section 4 : explorin...

  • Page 8: Section 2:

    8 xrt pro installation manual • www.Hsperformance.Com section 2: install download the install download option is used to install tuning onto a vehicle, or return a vehicle to stock. 1. Plug in xrt pro 2. Select vehicle to be tuned (tuners can only be installed on one vehicle at a time.) 3. Select in...

  • Page 9: Section 3:

    1-888-628-1730 • xrt pro installation manual 9 section 3: changing power levels dodge vehicles: select “change power level” from the main menu and follow the on-screen prompts. You will get to a screen as pictured below with two options. Ford and gm vehicles: select “change power level” from the mai...

  • Page 10: Section 4:

    10 xrt pro installation manual • www.Hsperformance.Com xrt pro change vehicle install download special functions tire size calibration diagnostics show settings update firmware navigation through the main menu: use the large up down buttons to page up and page down through all the main menu options....

  • Page 11: Section 5:

    1-888-628-1730 • xrt pro installation manual 11 section 5: other xrt pro features diagnostics this functions allows you to check vehicle diagnostics codes. Some models you will have an option to check engine or transmission diagnostics. Please select the desired module. Upon entering this menu, the ...

  • Page 12: Show Settings

    12 xrt pro installation manual • www.Hsperformance.Com show settings the show settings menu will allow you to see vehicle information and system information. T.V. # this number is the tuning version. It will change as h&s updates the tuner software. To see the latest tuner ver- sion on your xrt pro ...

  • Page 13: Power Levels

    1-888-628-1730 • xrt pro installation manual 13 power levels power levels can be adjusted on-the-fly at the touch of a button after installing the download to the vehicle. To adjust the power level, select change power level from the main menu. Note: the power level ratings listed may not be exact f...

  • Page 14: Speed Limiter

    14 xrt pro installation manual • www.Hsperformance.Com speed limiter this option allows for the adjustment of the factory speed limiter. Most 5.9l cummins trucks have a 106 mph speed limiter from the factory. The limiter can be adjusted from 50 mph to 200 mph. This option can only be adjusted during...

  • Page 15: Usa / Ulsd Calibration

    1-888-628-1730 • xrt pro installation manual 15 2007.5 - 2009 6.7l dodge cummins usa / ulsd calibration power levels to adjust the power level, select change power level from the main menu and follow the on-screen instructions. Note: the power level ratings listed may not be exact for your particula...

  • Page 16: Overdrive Tuning Options

    16 xrt pro installation manual • www.Hsperformance.Com been turned off. Fog lights w/high: enable / disable the fog lights staying on when high beams are being used. Daytime lights: enable / disable the daytime running lights. Seat belt minder: enable / disable the chime for the drivers seat belt sy...

  • Page 17: 5 – Highest

    1-888-628-1730 • xrt pro installation manual 17 5 – highest line pressure. Warning, only designed for built transmissions. The factory transmission pump is not designed to be run more than 165-170 psi of pressure. Our current overdrive tune sets these values to 170psi (the pump mechanically will not...

  • Page 18: Usa / Ulsd Calibration

    18 xrt pro installation manual • www.Hsperformance.Com 2010 - 2012 6.7l dodge cummins usa / ulsd calibration power levels to adjust the power level, select change power level from the main menu and follow the on-screen instructions. Note: the power level ratings listed may not be exact for your part...

  • Page 19: Stationary Idle Adjust:

    1-888-628-1730 • xrt pro installation manual 19 set head lamp delay: enable / disable the head lamp delay. Accessory delay: enable / disable the shut-off delay of your radio and accessory system after the key has been turned off. Fog lights w/high: enable / disable the fog lights staying on when hig...

  • Page 20: Usa / Ulsd Calibration

    20 xrt pro installation manual • www.Hsperformance.Com 2003 - 2007 6.0l ford powerstroke usa / ulsd calibration power levels power levels can be adjusted on-the-fly at the touch of a button after installing the download to the vehicle. To adjust the power level, select change power level from the ma...

  • Page 21: Usa / Ulsd Calibration

    1-888-628-1730 • xrt pro installation manual 21 2008 - 2010 6.4l ford powerstroke usa / ulsd calibration power levels power levels can be adjusted on-the-fly at the touch of a button after installing the download to the vehicle. To adjust the power level, select change power level from the main menu...

  • Page 22: Transmission Relearn

    22 xrt pro installation manual • www.Hsperformance.Com 1. Low: this option will shift into high gears at the lowest possible road speed. 2. Med: this option is the middle range of shift points 3. High: this option will shift into high gears at the highest possible road speed. Tpms adjustability / di...

  • Page 23: Usa / Ulsd Calibration

    1-888-628-1730 • xrt pro installation manual 23 2011-2013 6.7l ford powerstroke usa / ulsd calibration power levels to adjust the power level, select change power level from the main menu and follow the on-screen instructions. Note: the power level ratings listed may not be exact for your particular...

  • Page 24: Transmission Tuning

    24 xrt pro installation manual • www.Hsperformance.Com transmission tuning did you know that your h&s tuning device also has the capability of tuning your transmis- sion? Our transmission tuning for the 6r140 automatic transmission is custom tailored to mate with h&s engine tuning. Some features inc...

  • Page 25: Usa / Ulsd Calibration

    1-888-628-1730 • xrt pro installation manual 25 2007.5-2010 6.6l lmm duramax usa / ulsd calibration power levels power levels can be adjusted on-the-fly at the touch of a button after installing the download to the vehicle. To adjust the power level, select change power level from the main menu. Not...

  • Page 26: Usa / Ulsd Calibration

    26 xrt pro installation manual • www.Hsperformance.Com when re-training the transmission, always follow posted speed limits. Do not at- tempt runs in adverse weather conditions such as snow, ice, rain, wind, or any other conditions that may affect your vehicles traction or impair your visibility! 1....

  • Page 27

    1-888-628-1730 • xrt pro installation manual 27 reading when using non-stock sized tires, it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size. In addition, using a gps is a great way to dial in your factory speedometer. Entering a larger tir...

  • Page 28: Notice!!

    28 xrt pro installation manual • www.Hsperformance.Com notice!! The remaining pages in this manual are intended for those running a high sulfur calibration from h&s performance. More information can be found at www.Hsperformance.Com/highsulfur notice!! All vehicle specific information prior to this ...

  • Page 29: High Sulfur Calibration

    1-888-628-1730 • xrt pro installation manual 29 2007.5-2009 6.7l dodge cummins high sulfur calibration power levels to adjust the power level, select change power level from the main menu and follow the on-screen instructions. Note: the power level ratings listed may not be exact for your particular...

  • Page 30: Egr Emissions Equipment

    30 xrt pro installation manual • www.Hsperformance.Com a loss of power (limp mode). When running high sulfur tuning, it is recommended that all sensors located in the factory exhaust system be unplugged from the electrical harnesses. These sensors can also be re- moved completely with the factory ex...

  • Page 31: Power Levels

    1-888-628-1730 • xrt pro installation manual 31 power levels to adjust the power level, select change power level from the main menu and follow the on- screen instructions. Note: the power level ratings listed may not be exact for your particular vehicle. The listed ratings apply to the out-of-the-b...

  • Page 32: Egr Emissions Equipment

    32 xrt pro installation manual • www.Hsperformance.Com 1. Locate the wiring harness with the yellow sliding lock-tab on the urea pump assembly. The pump assembly is located near the bottom of the filler neck support. 2. Slide the yellow lock-tab down to dis-engage the lock and unplug the harness. Fo...

  • Page 33: High Sulfur Calibration

    1-888-628-1730 • xrt pro installation manual 33 2008-2010 6.4l ford powerstroke high sulfur calibration power levels power levels can be adjusted on-the-fly at the touch of a button after installing the download to the vehicle. To adjust the power level, select change power level from the main menu....

  • Page 34: Shift Schedule

    34 xrt pro installation manual • www.Hsperformance.Com 1. Easy power levels are: stock, 60hp, 120hp, and 175hp 2. Mild power levels are: stock, 80hp, 160hp, and 250hp 3. Hot damn 300 power levels are: 50hp, 125hp, 225hp, 300hp low boost fueling adjustment this adjustment allows you to limit the amou...

  • Page 35: Power Levels

    1-888-628-1730 • xrt pro installation manual 35 power levels to adjust the power level, select change power level from the main menu and follow the on-screen instructions. Note: the power level ratings listed may not be exact for your particular vehicle. The listed ratings apply to the out-of-the-bo...

  • Page 36

    36 xrt pro installation manual • www.Hsperformance.Com please follow these instructions carefully to unplug and disable the egr system: 1. Unplug orange egr harness found on top of the egr cooler assembly. The yellow lock tab must be slid out before the harness can be unplugged. 2. Unplug the egr bu...

  • Page 37: High Sulfur Calibration

    1-888-628-1730 • xrt pro installation manual 37 2007.5-2010 6.6l lmm duramax high sulfur calibration power levels power levels can be adjusted on-the-fly at the touch of a button after installing the download to the vehicle. To adjust the power level, select change power level from the main menu. No...

  • Page 38: High Sulfur Calibration

    38 xrt pro installation manual • www.Hsperformance.Com 2011-2013 6.6l lml duramax high sulfur calibration power levels power levels are not currently shift-on-the-fly for the 2011 - 2013 6.6l lml duramax. To adjust the power level, select change power level from the main menu and follow the on-scree...

  • Page 39: Urea / Scr System

    1-888-628-1730 • xrt pro installation manual 39 urea / scr system on the 2011 - 2013 6.6l lml duramax, there is a urea system that needs to be unplugged when running high sulfur tuning. The urea system must at least be unplugged but can be completely removed from the vehicle if desired. Failure to u...

  • Page 40

    40 xrt pro installation manual • www.Hsperformance.Com 1. Unplug 3 egr harnesses - two are brown with a yellow locking tab, one is black with a red locking tab (see pictures for locations)..

  • Page 41

    1-888-628-1730 • xrt pro installation manual 41.

  • Page 42: • Monthly Product

    Sign up for the h&s newsletter • monthly product updates • monthly tech tips • new web site features • and more! To register your product online, visit www.Hsperformance.Com/register or scan the qr code. Benefits to registering your product include: • guarantee full warranty coverage. • get entered ...

  • Page 44

    44 xrt pro installation manual • www.Hsperformance.Com.