I-Inc iB171 User Manual

Manual is about: 17 Inch Wide Screen TFT LCD Monitor

Summary of iB171

  • Page 1

    17 inch wide screen tft lcd monitor if171a user’s manual.

  • Page 2

    User’s manual 2 before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. Fcc class b radio frequency interference statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part ...

  • Page 3: Table Of Contents

    User’s manual 3 table of contents safety notice ......................................................................................................4 precautions.....................................................................................................4 special notes on lcd monitors .......

  • Page 4: Safety Notice

    User’s manual 4 safety notice 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and ac power cord, if any, must be used in order to comply with the emission limits. 3. ...

  • Page 5: Lamp Disposal

    User’s manual 5 special notes on lcd monitors the following symptoms are normal with lcd monitor and do not indicate a problem. • due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the power switch and then turn it on again to make sure the flicker disapp...

  • Page 6: Features

    User’s manual 6 before you operate the monitor features • 17” wide screen tft color lcd monitor • crisp, clear display for windows • recommended resolutions: 1440 x 900 @60hz • epa energy star ® • ergonomic design • space saving, compact case design checking the contents of the package the product p...

  • Page 7: Installation Instructions

    User’s manual 7 installation instructions install remove figure.1. Installing and removing the base installation: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the...

  • Page 8: Making Connections

    User’s manual 8 making connections connecting to a pc turn off your computer before performing the procedure below. 1. Connect one end of the d-sub cable to the back of the monitor and connect the other end to the computer’s d-sub port. 2. Plug one end of the ac power cord to the lcd monitor’s ac in...

  • Page 9

    User’s manual 9 adjusting the viewing angle • for optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • hold the stand so you do not topple the monitor when you change the monitor’s angle. • you are able to adjust the mon...

  • Page 10: Operating Instructions

    User’s manual 10 operating instructions general instructions press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (see figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • the power...

  • Page 11: Front Panel Control

    User’s manual 11 front panel control • power button: press this button to switch on/off of monitor’s power. • power indicator: green — power on mode. Orange — power saving mode. • menu / enter: activates the osd menu or confirms adjustments to settings. • adjust◄/►: navigate through adjustment icons...

  • Page 12: How To Adjust A Setting

    User’s manual 12 how to adjust a setting m m a a i i n n m m e e n n u u function description brightness select the「brightness」option on the「main menu」. Enter the option by pressing the 「menu」 button again, and adjust the level. Contrast select the「contrast」option on the「main menu」. Enter the option...

  • Page 13

    User’s manual 13 c c o o l l o o r r s s e e t t t t i i n n g g function description 5500k/6500k/ 9300k move the cursor to one of the preset options and select it. User move the cursor to the user option and select it 1. To adjust the red, enter the「r」option and adjust the level. 2. To adjust the g...

  • Page 14

    User’s manual 14 o o t t h h e e r r s s e e t t t t i i n n g g function description sharpness select the「sharpness」option to adjust the sharpness of the display. Set the value from 0 to 6. Dos mode select the「dos mode」option to set the monitor for use with pc. Enter the option and select 720 × 400...

  • Page 15: Plug And Play

    User’s manual 15 plug and play plug & play ddc2b feature this monitor is equipped with vesa ddc2b capabilities according to the vesa ddc standard. It allows the monitor to inform the host system of its identity and, depending on the level of ddc used, communicate additional information about its dis...

  • Page 16: Technical Support (Faq)

    User’s manual 16 technical support (faq) q & a for general problems problem & question possible solution power led is not on *check if the power switch is in the on position *power cord should be connected no plug & play *check if the pc system is plug & play compatible *check if the video card is p...

  • Page 17

    User’s manual 17 error message & possible solutions cable not connected : 1. Check that the signal-cable is properly connected, if the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. Input not support : your computer has been set to unsuita...

  • Page 18: Appendix

    User’s manual 18 appendix specifications driving system tft color lcd lcd panel size 17.0" pixel pitch 0.255mm(h) x 0.255mm(v) video h-frequency 24khz – 80khz v-frequency 55 – 75hz display colors 16.2m colors maximum screen size hor. :367.2mm ver. :229.5mm max. Resolution 1440 x 900 @75hz plug & pla...