I-Inc iH282 User Manual

Manual is about: LCD Monitor

Summary of iH282

  • Page 1

    Hsg xxxx ih282 hsg 1065.

  • Page 2

    User’s manual before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. Fcc class b radio frequency interference statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15...

  • Page 3: Table Of Contents

    User’s manual table of contents safety notice .................................................................................................. 4 precautions................................................................................................. 4 special notes on lcd monitors ...............

  • Page 4: Safety Notice

    User’s manual safety notice 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and ac power cord, if any, must be used in order to comply with the emission limits. 3. Th...

  • Page 5

    User’s manual special notes on lcd monitors the following symptoms are normal with lcd monitor and do not indicate a problem. • due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the power switch and then turn it on again to make sure the flicker disappea...

  • Page 6

    User’s manual before you operate the monitor features • 70cm / 27.5" wide screen tft color lcd monitor • crisp, clear display for windows • recommended resolutions: 1920 x 1200 @ 60hz • gp green product • ergonomic design • space saving, compact case design checking the contents of the package the p...

  • Page 7

    User’s manual power power source: 1. Make sure that the power cord is the correct type required in your area. 2. This lcd monitor has an internal universal power supply that allows operation in either 100/120v ac or 220/240v ac voltage area (no user adjustment is required.) 3. Connect the ac-power c...

  • Page 8

    User’s manual figure.1. Connecting to a pc 1 power ac input 2 hdmi input 3 hdmi input 4 vga input 5 audio input 6 earphone 8.

  • Page 9

    User’s manual adjusting the viewing angle • for optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • hold the stand so you do not topple the monitor when you change the monitor’s angle. • you are able to adjust the monit...

  • Page 10: Operating Instructions

    User’s manual operating instructions general instructions press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (see figure 3). By changing these settings, the picture can be adjusted to your personal preferences. • the power co...

  • Page 11

    User’s manual front panel control • power button: press this button to switch on/off of monitor’s power. • power indicator: green — power on mode. Orange — power saving mode. • menu / return: 1. Turn the osd menu on/off or return to the previous menu. 2. Exit osd menu when in volume osd status. • ad...

  • Page 12

    User’s manual resolution 640x480@60hz ↔ 720x480@60hz 1024x768@70hz ↔ 1280x768@70hz 1280x768@60hz ↔1360x768@60hz 1400x1050@60hz ↔ 1680x1050@60hz 1400x1050@rb 60hz ↔ 1680x1050@rb 60hz ** the screen resolutions available will depend on the purchased model. Notes: • do not install the monitor in a locat...

  • Page 13

    User’s manual how to adjust a settings brightness/ contrast brightness adjust the brightness value of the display according to your preference. Select「brightness」option to adjust the brightness value. Contrast adjust the contrast value of the display according to your preference. Select「contrast」opt...

  • Page 14

    User’s manual h-position select the 「h-position」option to shift the screen image to the left or right. Enter the option and adjust the level. [for vga only] v-position select the 「v-position」option to shift the screen image up or down. Enter the option and adjust the level. [for vga only] clock sele...

  • Page 15

    User’s manual osd color to choose the color combination of the osd window, select 「 osd color」option under 「osd setting」menu, choose modes 1/2/3. System audio input while transferring via the hdmi port, it is recommended to set audio input to hdmi; if no sound is outputted, it is recommended to sele...

  • Page 16

    User’s manual plug and play plug & play ddc2b feature this monitor is equipped with vesa ddc2b capabilities according to the vesa ddc standard. It allows the monitor to inform the host system of its identity and, depending on the level of ddc used, communicate additional information about its displa...

  • Page 17: Technical Support (Faq)

    User’s manual technical support (faq) q & a for general problems problem & question possible solution power led is not on *check if the power switch is in the on position. *power cord should be connected. No plug & play *check if the pc system is plug & play compatible. *check if the video card is p...

  • Page 18

    User’s manual input as a pc option, and make sure pc audio output cable is connected to monitor’s line in port(or audio in port) . [for hdmi input only] addendum related to windows 7 when you encounter display problem under windows 7, you need to do the following: 1. Make sure your pc computer (hard...

  • Page 19

    User’s manual error message & possible solutions cable not connected : 1. Check that the signal-cable is properly connected, if the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. Input not support : your computer has been set to unsuitable...

  • Page 20

    User’s manual 28 1280×960 @75hz 74.592 74.443 29 1280×1024 @60hz sxga 63.981 60.02 30 1280×1024 @72hz sxga 76.02 71.448 31 1280×1024 @75hz sxga 79.976 75.025 32 1360×768 @60hz wxga 47.712 60.015 33 1400×1050@60hz wxga + 64.744 59.948 34 1440×900 @60hz wxga + 55.469 59.901 35 1440×900 @60hz wxga + 55...

  • Page 21: Appendix

    User’s manual appendix specifications driving system tft color lcd size 70cm / 27.5" diagonal lcd panel pixel pitch 0.309mm(h) x 0.309mm(v) h-frequency 24khz – 80khz video v-frequency 56 – 75hz display colors 16.7m colors max. Resolution 1920 x 1200 @ 60hz plug & play vesa ddc2b tm , dpms on mode 85...