I-Trac A1 User Manual

Summary of A1

  • Page 1

    User manual a1 gps tracker (vehicle/motorcycle) version:08.

  • Page 2

    Disclaimer the ascend group company limited manual (the "manual") is proprietary to ascend group company limited. ("i-trac gps") and no ownership rights are hereby transferred. No part of the manual shall be used, reproduced, translated, converted, adapted, stored in a retrieval system, communicated...

  • Page 3

    1. Specification gsm module mtk program, gsm 850/900/1800/1900 support tcp protocol gps chipset u-blox 7020(support gps/glonass/galileo/compass) gps sensitivity -162db hot start 1sec.,average warm start 30 sec.,average cold start 35 sec, average altitude limit 18,000 meters (60,000feet) max. Operati...

  • Page 4

    Always on gsm signal ok 4. Important notice 1. This tracker have two work mode which is sms and gprs mode. Sms mode is for off line tracking by mobile phone. Gprs mode is for on line tracking by computer and mobile phone . 2. Default password 0000 3. Please unlock the sim card in your mobile phone f...

  • Page 5

    Apn is access point network, each gsm operator has a unique apn name, please contact your operator to get correct gprs apn info. 2. Please register the gps tracker on web platform www1.Igpstracking.Net(or www.Igpstracking.Net, the same) first, then you can see on the ios andriod app "itracksafe". Yo...

  • Page 6

    Asset name: define by yourself; you can enter a-z number or numeric device id: on the gps tracker cover , you can find the “id”. Very important note: asset name and device id must be unique on the software, you can add once only, you need to delete it from database before adding it again. Create tim...

  • Page 7

    Put a check mark on the device, and right click, you will see the menu as below picture. Now you can track online. Attention: for 900d gps software, "monitor" and "asset name" must be checked till the font becomes blue, then the gps tracker will update location automatically on map.Like below pictur...

  • Page 8

    Reply: set mode ok, current mode: sms gprs mode command: 710+ user password eg: 7100000 reply: set mode ok, current mode: gprs 8.3. Change user password command: 777+new password +old password (4 figures) eg: 77712340000 reply: set user password ok 8.4. Time zone command: 896 + user password + d + n...

  • Page 9

    Open the power off alert command: 011 + user password eg: 0110000 reply: power alarm on close the power off alert command: 010 + user password eg: 0100000 reply: power alarm off 8.8. Over speed alarm command : 122+user password+space+x eg: 1220000 120 reply: set rate limit:120 close command : 122000...

  • Page 10

    Apn is access point network, each gsm operator has a unique apn name, please contact your operator to get correct gprs apn info. 8.12. Set server ip address and port command: 804+user password+space+ip+space+port eg: 8040000 58.64.205.22 8000 reply: set server ip and port ok remark: we have two serv...

  • Page 11

    4/ why it said "log in fail" on on itrac gps tracker ios andriod app "itracksafe" answer: kindly choose the correct server, we have two server, please choose 58.64.205.22, default is null. 5/ why the gps tracker can not come online after i set ip, port apn answer: send sms command 7100000 switch gps...