IBabyGuard Infant Snooze Baby Sleep Monitor User Manual - page 12
Copyright 2012 iBabyGuard International
www.iBabyGuard.com
5
Power on
Parent Unit
Press and hold the power
button till the LCD display
is lighted up.
The
Parent Unit
will establish connection with the
Infant Snooze automatically. Once connection is
established, the current baby status will be displayed.
The display will indicate baby sleeping after the baby
had settled down to sleep. Please refer to
section 9
for
details.
When an auto-calibration process is in progress, the
display will indicate an hour glass rotating in a circular
motion.
WARNING:
The Infant Snooze will establish communication with only 1 device at one time.
Please ensure the Smart Phone Apps is turned off when the Parent Unit is in use and vice versa.
2.2 Setting up the
Parent Unit
Alarm type
There are 2 alarm types to select for activation of alarm
for the designated baby states which require attention.
Select the switch on the right hand side of the
Parent
Unit
in accordance to your preferred alarm type.
Sound (top position)
Vibrate (bottom position)
The corresponding vibrate or sound alarm icons for the
selected alarm type will pop up on the LCD display
accordingly when pushing the switch.
HINT:
Consider switching to vibration mode when parents / caregivers do not want to disturb others around
them with the sound alarm.