Immobilizer user guide.
Congratulations on your purchase of the iblue immobilizer. Prior to using the product, please make sure you read these instructions carefully. The package includes 1 pc. Iblue immobilizer, 1 pc. Plastic card containing the puk code and 1 pc. Booklet. If any of the components are missing from the box...
Operating input voltage range 9-15 v operating temperature range -40°c - +85°c current consumption when armed 19 ma current consumption when disarmed 105 ma number of interrupted circuits 2 delay before rearming after ignition is turned off 30 sec type of output relay output without fuse protection ...
General information after turning the ignition key the iblue immobilizer prevents the engine from starting until the operator of the vehicle approves this on his/her smartphone using the mobile applica- tion specially designed to control the immobilizer. The device can be installed in all vehicles e...
Warning! During installation the installing expert must verify that the circuit of which is interrupted by the immobilizer does not trigger an error code in the on-board computer of the vehicle that aff ects the operational capability of the vehicle. It is important to power the immobilizer from a w...
Using the iblue immobilizer the free smartphone application necessary to operate the immobilizer can be downloaded from appstore (in case of smartphones with the ios tm operating system), the google play store tm (in case of smartphones with the android system) or from the windows store tm (in case ...
The immobilizer has two modes of operation. In normal mode, entering the right pin code enables the start up. The permission is valid until the ignition is turned off. In service mode the immobilizer automatically enables starting when ignition is turned on, this time there is no need to use the pin...
Important information! After you turn the ignition key, the signals of the bluetooth® radio in the immobilizer can be detected only for 30 seconds. If during this time the smartphone cannot connect to the im- mobilizer, the ignition key must again be set to the 0 position and then turned on again. A...
Descriptions and illustrations in these directions for use and installation may change. The manufacturer reserves the right to carry out any and all modifications it regards necessary to improve the product in technical, production or trading terms, while leaving the fundamental features of the prod...
