ICartech Aurora GX730E Operation instructions manual - Rds Operations
EN - 5
RDS operations
PTY function
PTY is the abbreviation for Program Type
which is a code defining the type of program
being broadcast (e.g. News or Rock).
Six PTY options will display on the screen. To
view more PTY options, touch the scroll bar
and arrows on the screen.
When one PTY option is touched (e.g.
News), auto search for next available PTY
by increasing tuning frequency until the PTY
of the next station matches the current. If no
matched PTY has been found, the unit will
return to the original radio frequency.
Program Service (PS)
Used for receiver displays of an 8 character
alpha numeric Program Service name which
may use Upper or Lower case characters, e.g.
{BBC_4_FM}, {Classic_}.
CT (Clock Time)
Some stations broadcast the time and date
within the encoded RDS signal. The clock
time is automatically adjusted when 'CT' is set
to 'On'.
RT (Radio Text)
When this function is activated, the unit will
display short message data transmitted from
the provider, such as station information, the
name of the current broadcasting song and
the artist name.
Radio mode
Select radio as playing source
Open the SOURCE MENU and then touch RADIO.
Select one radio band
Press the [BAND] key on the display panel or
remote control or touch the [BAND] icon on
the user interface to select one radio band
among FM1, FM2, FM3, MW1 and MW2.
Auto tuning
Press the [
] / [
] key on the display
panel or remote control or touch the [
]
/ [ ] icon on the user interface to seek a
higher / lower station.
To stop searching, repeat the operation above
or press other keys having radio functions.
Note:
When a station is received, searching stops
and the station is played.
If the unit receives a stereo broadcasting, the
indicator light of stereo ‘ST’ on the TFT or
LCD display will be lighted.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [ ] / [ ] key on remote control
or touch the [ ] / [ ] icon on the user
interface to tune in a higher / lower station.
Touch the numeric keypad icon( ) and then
touch the numeric buttons to input the radio
station frequency numbers.
Auto save
Only stations with sufficient signal strength
will be detected and stored in the memory.
When the monitor is closed, press and hold
the [AS] key on the display panel.
When the monitor is opened, touch the [AS]
icon on the user interface.
To stop auto save, press other keys having
radio functions.
Notes:
After auto save, the previous saved
stations will be overwritten.
The unit has 5 bands, such as FM1, FM2,
FM3, MW1, MW2, and Each band can
store 6 stations; hence the unit can store
30 stations in all.