ICartech Aurora GX730E Operation instructions manual - Music Mode
EN - 13
Voice transfer
While talking, touch the 'Voice transfer' icon
on the screen to transfer audio from the unit
to your mobile phone, and touch again to
transfer audio from your mobile phone to the
unit.
Note: Some mobile phones will transfer audio
from the unit to themselves once the incoming
call is answered.
Microphone mute
While talking, press the microphone mute icon
on the screen to mute the microphone built in
the unit. Under this condition, the one talking
over the telephone with you can not hear
what you are saying. Touch the mute icon
again to resume microphone functionality.
Music mode
Pairing
Before pairing, switch the work mode of
the Bluetooth module to music mode. The
procedures of pairing under music mode is
the same as the phone mode.
A2DP
A2DP is short for Advanced Audio Distribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones not supporting this function can
transmit mono audio only.
After pairing, open the audio player of your
mobile phone and set the transmit mode to
Bluetooth. At this time, the speakers of your
mobile phone will close automatically.
To set the transmit mode of mobile phones
to Bluetooth, please refer to the user manual
or help document of the mobile phone in use
or the audio player software because the
audio players of different mobile phones vary
greatly.
AVRCP
AVRCP is short for Audio/Video Remote
Control Profile. The mobile phones supporting
this function can control the playback of a
Bluetooth audio player.
After pairing, touch the corresponding icon
to control current playback, such as Play,
Pause, Stop, Previous, Next.
Bluetooth mode
Select TV as playing source
Open the SOURCE MENU and then select TV.
Auto search
To search for a higher/lower TV channel,
press and hold the [ ]/[ ] key on the
display panel or remote control.
Notes:
To stop auto searching, press other keys
having TV functions.
When a TV channel is received, searching
stops and the TV channel is played. If no
TV channel is detected, the tuning channel
stops at the very beginning channel when
the searching process is finished.
Manual search
Press the [ ]/[ ] key repeatedly on the
display panel or remote control to change TV
channel in steps.
Auto save
Search all TV channels in the whole range
and storing the available TV channels
automatically.
Press and hold the [ ] key on the remote
control to start auto save.
To stop this process, press any other keys to
save TV functions.
Preview scan
Scan the stored TV channels and play each
channel for 5 seconds.
Press the [ ] key on the front panel or
remote control to start preview scan. To stop
this process, press any other keys having TV
functions.
Change TV channel
Play the previous / next stored channel.
To play the previous / next stored TV channel,
press the [Up] / [Down] key on the remote
control.
Play a particular channel To play a particular
TV channel, press the numeric keys of remote
control continuously.