Ice tech ps 1 technical service manual ice tech ps models: icetech ps 22 icetech ps 32 icetech ps 42 icetech ps 52 icetech ps 62 icetech ps 82 icetech ps 122 carefully read the instructions contained in this manual since they provide important information relative to safety during installation, use ...
Ice tech ps 2 table of contents 1. Introduction ................................ 1.1. Warnings ................................ 1.2. Description ................................ 1.3. Operating principle ................................ 2. Specifications ................................ 2.1. Diagrams...
Ice tech ps 3 1. Introduction thank you for choosing ice tech’s ice tech ps you have purchased one of the most reliable ice read the instructions contained in this manual since they provide important information relative to safety during installation, use and maintenance. 1.1. Warnings this applianc...
Ice tech ps 4 1.2. Description the ice tech ps ice cube maker is the result development of a high technology factory. Main features: storage bin made of plyester strengthened with glas fibre or abs stock bin made of high resistance plastic materials polyurethane insulation injected heavy duty door (...
Ice tech ps 5 agitator motor. The compressor continues working for another 20”, then stops and the agitator motor is connected. The cam motor starts to move downwards, making part of the surplus flow to the drain and dropping the ice cubes, pushed by the eject plate into the storage bin. The pan eve...
Ice tech ps 6 once the storage bin is full the pan stops in its downward movement as it touches the cubes, so working the safety stop micro-switch and switching off the machine. Production will start again as soon as the cubes which detained it move or are removed. 2. Specifications 2.1. Diagrams of...
Ice tech ps 7 2.2. Consumption data, weights, crated dimensions and volumes model cooling water usage l/hour (1) ice producti on water usage l/hour (1) ice tech ps 22a ice tech ps 22w 15 ice tech ps 30a ice tech ps 30w 15 ice tech ps 42a ice tech ps 42w 25 ice tech ps 52a ice tech ps 52w 33 ice tech...
Ice tech ps 8 2.3. Production tables for ice 45 25 27 22 40 24 25 24 35 22 24 25 30 20 22 26 25 19 20 28 20 18 19 30 15 17 18 31 10 16 17 32 5 10 45 25 27 26 40 24 25 28 35 22 24 29 30 20 22 31 25 19 20 33 20 18 19 35 15 17 18 37 10 16 17 38 5 10 r o o m t e m p e r a t u r e ºc ice tech ps technica...
Ice tech ps 9 45 25 26 35 40 24 25 37 35 22 24 38 30 21 22 40 25 20 21 42 20 19 20 44 15 18 19 45 10 17 18 47 5 10 45 25 26 41 40 24 25 43 35 22 24 46 30 20 22 51 25 19 20 54 20 18 19 57 15 17 18 60 10 16 17 64 5 10 r o o m t e m p e r a t u r e ºc ice tech ps technical service manual ice tech ps 42...
Ice tech ps 10 45 29 30 47 40 28 29 49 35 26 28 52 30 24 26 59 25 22 24 62 20 21 22 65 15 20 21 68 10 19 20 72 5 10 45 24 26 71 40 23 24 74 35 22 23 77 30 21 22 83 25 20 21 85 20 19 20 90 15 18 19 95 10 17 18 97 5 10 r o o m t e m p e r a t u r e ºc ice tech ps technical service manual ice tech ps 5...
Ice tech ps 11 45 24 26 99 40 23 24 103 35 22 23 108 103 30 21 22 114 108 25 20 21 119 114 20 19 20 125 119 15 18 19 132 125 10 17 18 136 132 5 10 500 ppm water quality (240 micromh/cm) r o o m t e m p e r a t u r e ºc ice tech ps technical service manual ice tech ps 122 28 29 30 31 92 85 81 79 26 2...
Ice tech ps 12 3. Delivery & unpacking upon receipt, thoroughly inspect the packing container. If there appears to be container contact the shipper immediately. Unpack unit in the presence of delivery personnel noting any damage on the waybill. Ice tech packing bears the “green point” on all models ...
Ice tech ps 13 4. Installation 4.1. Recommended placement of unit important! The ice cube maker is delivered on a small wooden pallet and is protected with a cardboard box and packaging. Loosen the cardboard box by cutting the straps, then lift vertically. After having removed the packaging, make su...
Ice tech ps 14 a) water impurities: major impurities are eliminated by filters provided. Filters should be cleaned regularly depending on purity of water. For minor impurities we recommend installing a 5-micron filter. (provided with the unit: part # ice tech 207499). B) water with more than 500 ppm...
Ice tech ps 15 important! Supply socket must be properly earthed. Be sure to check standard for country where appliance is going to be installed. 4.6. We recommend levelling place machine where it is required and level it once all four legs have been space requirements there should be a 150 mm gap o...
Ice tech ps 16 5. Operation 5.1. Preliminary checks a) is the machine levelled? B) are voltage and frequency of mains supply the same as indicated on rating plate? C) is drainage system working properly? D) is air circulation and room temperature adequate? (air ambient temperature maximum 43° c mini...
Ice tech ps 17 important! Advise the final user on maintenance procedures which are not included in warranty, as well as those breakdowns ca of proper maintenance procedures. 6. Adjustments 6.1. Condenser water valve pressostat water cooled machines this pressostat controls high pressure by opening ...
Ice tech ps 18 6.2. Fan pressostat (air–cooled models) pressure control operates on high pressure by starting and/stopping fan. Differential is fixed (1kg/cm2 or 14 psi). Cut-off pressure must be 16 kg/cm2 (228 psi) . Low pressure values may cause gearbox malfunction. Pressure values higher than 16 ...
Ice tech ps 19 7. Maintenance and cleaning instructions important! **maintenance and cleaning procedures as well as problems derived from failing to carry them out are not covered by the warranty. Proper maintenance is essential to obtain favourable ice quality and frequency depends on water quality...
Ice tech ps 20 8. Maintenance and cleaning warning: unit should always be disconnected during maintenance/cleaning procedures. Water condenser 1) disconnect machine. 2) close water faucet. 3) disconnect water entry/exit from condenser. 4) prepare a solution of 50% phosphoric acid in distilled water....
Ice tech ps 21 3) hold agitator paddles so that water pan releases water. 4) once the water pan returns to its horizontal position again, switch off the machine. Pour 3 litres of water and one half of di 5) allow the solution to work for 20 or 30 minutes, occasionally turning the paddles by hand so ...
Ice tech ps 22 cleaning the water inlet filters these round wire gasket filters placed on either end of the water hose to blocked in the first few days of use, especially when the plumbing installation is new. Clean them under a jet of water. Checking for water leaks this must be done whenever maint...
Ice tech ps 23 9. Troubleshooting problem 1) none of the electrics work. 2) all the electrics work except compressor 3) all the electrics work but the compressor “klixons” (cycles intermittently). 4) everything appears to be running correctly but no ice made in the evaporator. 5) ice cube form corre...
Ice tech ps 24 problem 6) low ice production. 7) a block of ice is formed in the tray 8) the machine does not stop though the bin is full of cubes. 9) cubes are formed normally for some cycles and then the evaporator stops cooling. 10) the tray remains in stop position although cubes after harvest c...
