J&B Importers Miami Sun Assembly Manual - Step 10) Attaching
(Fig.12)
Step 10) Attaching
Vinyl Basket
A. With the reflector bracket on basket
facing rear,
place and center the basket onto the
unit basket support bars.
B. Align the two holes of unit basket
support bar with the holes of the basket
attaching brace. Attach nuts and bolts
and finger tighten. Repeat for other bar.
C. Tighten securely, all nuts and bolts.
D.
Warning: Never put a child or pet in the basket.
(Fig.11)
12
Step 11) Attaching Stem & Handlebar
A. Loosen bolt on stem and insert stem into
head tube.
B. Insert handlebar through stem, center it
and adjust to desired angle. Tighten
handlebar binder nut securely.
C. Place handlebar and stem at right angle
to length of trike and tighten stem
expander bolt securely.
D.
ÒWarning:
The stem minimum
insert mark must be inside
the head tube.Ó
Step 12) Attaching Grips & Brake Lever
A. Loosen screw on brake lever attachment bracket until lever slides over right
handle of handlebar. Do not tighten screw yet.
B. Slide grips on handlebar, making sure that grips are all the way to the end of the
handlebar.
Do not use any type of lubricant to install grips.
C. Slide lever back, as close as possible, to grip on handlebar. Turn lever to desired
angle and tighten securely.