J&B Importers Miami Sun Assembly Manual - Step 2) Contõd
Step 2) ContÕd
C. Make sure that safety fork washer devices
remain hooked into fork end tips.
D.
“
Warning:
Do not ride without safety fork washers.Ó
(Fig. 3)
8
Arms
Flange
Support Bar
Left side
Top View
Right side
Step 3) Free Wheel Rear Unit Assembly
A. Thread the free wheel adapter into the plain side
of free wheel and tighten until free wheel and
adapter are flush with each other.
(Fig. 4A)
*At this time we recommend spraying the axle with
a dry Teflon lubricant for improved performance
*
B. Pull unit axle halfway through unit,
install adapter with free wheel,
making sure that free wheel faces
axle flange. Now push axle all the way
through the unit.
C. Study
Fig. 4B
for correct positioning of components
on unit.
D. Unit is now ready to be installed on trike frame.
(Fig. 4A)
(Fig. 4B)
Note: Do not install axle key yet.