JAGER PRO M.I.N.E. Operation Manual

Summary of M.I.N.E.

  • Page 1

    1.

  • Page 2: Warranty

    2 warranty limited warranty: jager pro, llc warrants the product to be free from malfunctions and defects in both materials and workmanship for one (1) year from the date of purchase (“warranty period”). Jager pro, llc will repair or replace, at its option, the product if it fails to function proper...

  • Page 3: Table of Contents

    3 table of contents camera characteristics................................................ 04 quick start programming............................................. 07 main menu tabs............................................................ 08 camera tab.................................................

  • Page 4: Camera Characteristics

    4 front view 1 2 3 4 5 6 camera characteristics 1. Antenna: standard antenna shown receives cell tower signals. Our 5 decibel booster antenna is available as an accessory for operation in low signal areas. 2. Ir illuminator: 44 infrared leds that illuminate the target area when camera functions at n...

  • Page 5

    5 1. Dc port plug: waterproof seal to protect internal components when external battery (optional equipment) is not in use. 2. Mounting port: 1/4 x 20 internal threads for securing camera to a t-post mount. Only thread external devices two complete rotations into the camera mounting port then tighte...

  • Page 6

    6 inside view 1. Antenna port: attachment point to install various antennas depending on local cellular strength. Our 5 db booster antenna is available as an accessory for operation in low signal areas. 2. Display: screen to observe menus, photos and settings. 3. Selector switch: used to enter into ...

  • Page 7: Quick Start Programming

    7 left side view 1 2 1. Sim card port: slot for receiving a cellular sim card from gsm network providers such as at&t and t-mobile. 2. Sd card port: slot for receiving an sd card. The camera has no internal memory. An sd card smaller than 32gb must be used to store photos, video and gsm data. Quick ...

  • Page 8: Main Menu Tabs

    8 main menu tabs press the menu button to access the program display. The camera will shut down after 3 minutes sitting idle to conserve battery power. Users must move the selector switch to off then setup again to restart the camera and access menu. Press the menu button to access the program displ...

  • Page 9: Camera Tab:

    9 camera tab: • mode: choose photo or video. (recommend photo for immediate text information sent to phone.) 720p/wvga qvga/1080p options • photo size: choose the image size; 3mp, 5mp, or 8mp. • video size: choose the video size. 1/2/3 burst option • photo burst: choose the number of pictures taken ...

  • Page 10: • Trigger Interval-

    10 • trigger interval- the timeout period between pir triggers for each photo or video capture. We recommend a two minute trigger interval. A one minute selection may not allow a photo to transmit via sms in low signal areas before the next pir trigger. The photo is always saved on the sd card but m...

  • Page 11: System Tab:

    11 system tab: • set clock: enter correct date and time. • time stamp: choose on or off to select the date and time stamp on the picture. • flash power: choose between low or high. We recommend high to extend infrared illumination beyond trap. • format: formats the sd card and deletes all photos/vid...

  • Page 12: Wireless Tab:

    12 • default: restores camera back to factory settings. Wireless tab: • send mode instant: (recommended) the camera sends a photo immediately when it takes a photo. It will only send an sms text message of the sequence number when a video is taken (video: 3/99). The max num field indicates the maxim...

  • Page 13: • Send To:

    13 • send to: phone: (recommended) a text photo will arrive to a cell phone much faster than an email can arrive to either a cell phone or computer provided the cell phone has good reception. A phone number must appear in recipients. Email: the image will be sent to email. An email address must appe...

  • Page 14

    14 image from on menu ok • phone: press ok to select an open tab and move right one click to input the recipient phone number. Use the keypad to type the 10-digit phone number. Select save which returns to the phone submenu. Select save which returns to the wireless submenu. Press the delete button ...

  • Page 15: Manually Sending Photo

    15 image from on ghi jkl image from: press ok to select on and input the camera, trap or bait site name. Use the keypad to type the information. Select save and return to the wireless submenu. Copy para: will not be used for normal daily operations. Setup tool: will not be used for normal daily oper...

  • Page 16: Sms Command Codes

    16 the sms switch must be on for the camera to receive text commands and was previously covered under the wireless menu tab. The m.I.N.E™ cam is able to receive text commands from up to four phone numbers to perform 22 different functions remotely. All four phone numbers have the ability to send and...

  • Page 17

    17 login fail corrective action x users should always test their camera at a new location prior to erecting a feeder or a trap enclosure. Move the selector switch from off to setup. The screen will display “checking network”. Allow approximately 20 to 30 seconds for the camera to acquire a cellular ...

  • Page 18: Control Box Receiver

    18 timing camera transmitter to control box receiver this step is only a function of the 3g m.I.N.E.™ camera. The 3g i.C.E.™ camera does not utilize an internal transmitter. The 3g m.I.N.E. Camera has an internal transmitter on the circuit board and must be located within 50 meters of the m.I.N.E.™ ...

  • Page 19: Camera Deployment

    19 camera deployment align the 1/4 by 20 threads of the t-post mounting bracket to the camera mounting port. Thread the mounting bracket no more than three complete rotations into the camera mounting port. Then tighten using the adjusting nut. Forcing external threads to the bottom will damage the c...

  • Page 20

    20 ensure the camera pir triggers and sends a photo to your cell phone. This step will verify the camera is positioned and programmed correctly. Ensure the feeder is centered and the entire gate opening is visible. From left to right- jager pro is the camera manufacturer. The “m” indicates the photo...

  • Page 21: Care And Maintenance

    21 warning! The dc port plug must be removed before accessing camera functions. Opening the camera while the external battery is plugged into the housing port may result in damage to both the camera and the external battery. Warning! Removing screws from internal camera ports will damage electronic ...

  • Page 22: Camera Accessories

    22 camera accessories external 5 db booster antenna this antenna is designed for areas where cellular coverage is weak and enables users to expand the usable range of the m.I.N.E.™ cam. • 5 db gain for remote areas • 2.5 feet mast allows for higher vertical reach in terrain such as valleys and thick...

  • Page 23: Purchasing A Sim Card

    23 purchasing a sim card at&t sim cards must be purchased in person from an at&t corporate store; not an at&t authorized retailer. Type “at&t corporate store” into a search engine (i.E. Google or bing) and enter your zip code to find the nearest location. Users cannot request unlimited messaging pac...

  • Page 24: Glossary

    Glossary cdma - code division multiple access is a competing cell phone service technology to gsm, which is the world’s most widely used cell phone standard. Sprint, verizon, and virgin mobile use cdma. Gprs - general packet radio service was early technology to enable data communication on gsm netw...

  • Page 25: Sms Command Code List

    25 • change send mode: instant *140#0# response: send instant photo • change send mode: daily report *140#1# response: send daily report • change send off *140#2# response: send is off • change send via: mms *120#0# response: send via mms. • change send via: internet *120#1# response: send via inter...

  • Page 26

    Jager pro offers a complete line of hog control products, services and education view our instructional video series online at: po box 4006 columbus, ga 31914 phone: 706-718-9789 email: info@jagerpro.Com website: www.Jagerpro.Com like us on facebook www.Facebook.Com/jagerprohcs.