Jamis Bicycle Owner's Manual - page 20
34
35
Setup&Maintenance
For proper set up and maintenance please consult the owner’s manual for the suspension fork and/or rear shock that you received with your
bicycle. If you did not receive the manual(s) please contact the fork or shock manufacturer and they can send you one, or download one from
their website.
Inspection of Front and/or Rear Suspension
Before every ride ensure that the suspension fork and/or rear shock is operating properly.
After every 10 hours of use inspect the front fork to make sure there is no hydraulic oil leaking from the fork and that it is operating properly. On
the rear suspension, check shock mounting bolts and pivot bolts for tightness. For other areas that should be checked, consult your owner’s
manual for your front fork and/or rear shock.
WARNING: Changing suspension adjustment can change the handling and braking characteristics of your bicycle. Never change
suspension adjustment unless you are thoroughly familiar with the suspension system manufacturer’s instructions and
recommendations, and always check for changes in the handling and braking characteristics of the bicycle after a suspension
adjustment by taking a careful test ride in a hazard-free area.
Suspension can increase control and comfort by allowing the wheels to better follow the terrain. This enhanced capability may allow you to ride
faster; but you must not confuse the enhanced capabilities of the bicycle with your own capabilities as a rider. Increasing your skill will take time
and practice. Proceed carefully until you have learned to handle the full capabilities of your bike.
WARNING: Not all bicycles can be safely retrofitted with some types of suspension systems. Before retrofitting a bicycle with any
suspension, check with the bicycle’s manufacturer to make sure that what you want to do is compatible with the bicycle’s
design. Failing to do so can result in catastrophic frame failure.
Many clipless pedals are designed to allow the rider to adjust the amount of force needed to engage or disengage the foot. Follow the
pedal manufacturer’s instructions, or ask your dealer to show you how to make this adjustment. Use the easiest setting until engaging and
disengaging becomes a reflex action, but always make sure that there is sufficient tension to prevent unintended release of your foot from the
pedal.
WARNING: Clipless pedals are intended for use with shoes specifically made to fit them and are designed to firmly keep the foot
engaged with the pedal. Do not use shoes which do not engage the pedals correctly.
Practice is required to learn to engage and disengage the foot safely. Until engaging and disengaging the foot becomes a reflex action, the
technique requires concentration which can distract your attention and cause you to lose control and fall. Practice engaging and disengaging
clipless pedals in a place where there are no obstacles, hazards or traffic; and be sure to follow the pedal manufacturer’s setup and service
instructions. If you do not have the manufacturer’s instructions, see your dealer or contact the manufacturer.
F. Bicycle Suspension
Many bicycles are equipped with suspension systems. There are many different types of suspension systems — too many to deal with
individually in this Manual. If your bicycle has a suspension system of any kind, be sure to read and follow the suspension manufacturer’s setup
and service instructions. If you do not have the manufacturer’s instructions, see your dealer or contact the manufacturer.
If your Jamis is a dual suspension bicycle, it has a very advanced multi-link suspension design. Proper care and maintenance is critical to your
safety and also to ensure long lasting performance. All maintenance and repairs should be performed by your Authorized Jamis dealer.
WARNING: Failure to maintain, check and properly adjust the suspension system may result in suspension malfunction, which
may cause you to lose control and fall.
If your bike has suspension, the increased speed you may develop also increases your risk of injury. For example, when braking, the front of a
suspended bike dips. You could lose control and fall if you do not have experience with this system. Learn to handle your suspension system
safely. See also Section 4.C.