Jamis Bicycle Owner's Manual - page 4
2
3
1. First
NOTE: We strongly urge you to read this Manual in its entirety before your first ride. At the very least, read and make sure that you understand
each point in this section, and refer to the cited sections on any issue which you don’t completely understand. Please note that not all bicycles
have all of the features described in this Manual. Ask your dealer to point out the features of your bicycle.
A. Bike fit
1. Is your bike the right size? To check, see Section 3.A. If your bicycle is too large or too small for you, you may lose control and fall.
If your new bike is not the right size, ask your dealer to exchange it before you ride it.
2. Is the saddle at the right height? To check, see Section 3.B. If you adjust your saddle height, follow the Minimum Insertion instructions
in Section 3.B.
3. Are saddle and seat post securely clamped? A correctly tightened saddle will allow no saddle movement in any direction. See Section 3.B.
4. Are the stem and handlebars at the right height for you? If not, see Section 3.C.
5. Can you comfortably operate the brakes? If not, you may be able to adjust their angle and reach. See Section 3.D and 3.E.
6. Do you fully understand how to operate your new bicycle? If not, before your first ride, have your dealer explain any functions or features
which you do not understand.
B. Safety first
1. Always wear an approved helmet when riding your bike, and follow the helmet manufacturer’s instructions for fit, use and care.
2. Do you have all the other required and recommended safety equipment? See Section 2. It’s your responsibility to familiarize yourself with
the laws of the areas where you ride, and to comply with all applicable laws.
3. Do you know how to correctly secure your front and rear wheels? Check Section 4.A.1 to make sure. Riding with an improperly secured
wheel can cause the wheel to wobble or disengage from the bicycle, and cause serious injury or death.
4. If your bike has toeclips and straps or clipless (“step-in”) pedals, make sure you know how they work (see Section 4.E). These pedals require
special techniques and skills. Follow the pedal manufacturer’s instructions for use, adjustment and care.
5. Do you have “toe overlap”? On smaller framed bicycles your toe or toeclip may be able to contact the front wheel when a pedal is all the
way forward and the wheel is turned. Read Section 4.E. to check whether you have toeclip overlap.
6. Does your bike have suspension? If so, check Section 4.F. Suspension can change the way a bicycle performs. Follow the suspension
manufacturer’s instructions for use, adjustment and care.
A special note for parents:
As a parent or guardian, you are responsible for the activities and safety of your minor child, and that includes making sure that the bicycle
is properly fitted to the child; that it is in good repair and safe operating condition; that you and your child have learned and understand the
safe operation of the bicycle; and that you and your child have learned, understand and obey not only the applicable local motor vehicle,
bicycle and traffic laws, but also the common sense rules of safe and responsible bicycling. As a parent, you should read this manual, as well
as review its warnings and the bicycle’s functions and operating procedures with your child, before letting your child ride the bicycle.
WARNING: Make sure that your child always wears an approved bicycle helmet when riding; but also make sure that your child
understands that a bicycle helmet is for bicycling only, and must be removed when not riding. A helmet must not be worn while
playing, in play areas, on playground equipment, while climbing trees, or at any time while not riding a bicycle. Failure to follow this
warning could result in serious injury or death.