Jaybird BlueBuds X BBX1 User Manual

Download

Print this page

Bookmark us

CORD CLIPS

(FOR LATER)

MAKE AN “S” SHAPE WITH THE MIDDLE SECTION OF THE CORD

USER GUIDE

BLUEBUDS X PREMIUM BLUETOOTH EARBUDS (BBX1)

GREAT SOUND PERFORMANCE IS IN

SELECTING THE RIGHT SIZE EARTIP

WE LOVE GREAT SOUND. MAKE SURE YOU HEAR IT.

Because everyone’s ears are different, be sure to try

all sizes of eartips. Only with the right size eartips

will you enjoy a snug fit & premium sound quality.

BACK IT UP WITH SECURE FIT EAR CUSHIONS.

The earbuds may slip out of your ear a little. You will

lose bass when this happens so use the secure fit

ear cushions to hold them in place for best sound.

CONTR

OLLER

RIGHT

EAR

UNDER

-EAR:

SLIDE SECURE FIT EAR CUSHIONS ALL THE WAY BACK AND COVER LED

(DON’T WORRY, LED GLOWS CLEARLY THROUGH THE EAR CUSHION)

LOCK THE TIP OF THE EAR

CUSHION INTO THE TOP OF THE

BOWL OF THE EAR AS SHOWN.

YOU SHOULD HAVE A SNUG FIT

WITH CONTACT ON THE LOWER,

BACK AND TOP PORTIONS OF

THE BOWL OF THE EAR.

INSTALL YOUR PREFERRED SIZED SECURE FIT EAR

CUSHIONS AS SHOWN.

FITTING / SIZE SELECTION

GUIDANCE ON NEXT TWO PAGES.

SOUND CHECK

WHEN WORN UNDER-EAR:

CONTROLLER ON

RIGHT

side

NOTE EARTIPS ANGLE INWARDS (FORWARDS)

FOLLOWING DIRECTION OF YOUR EAR CANAL.

This means that L&R orientation is

reversed for over-ear, as explained later.

L&R ORIENTATION

Pair (set up) headphones to your

music device, play music,

and try

each size of eartip to find the

best fit and sound performance.

A proper seal is essential for you

to fully appreciate the high quality

audio of BlueBuds X.

NEED HELP PAIRING?

Full pairing details pages 29-32.

HOLD

4 SEC

PAIR

ALTERNATING RED/GREEN

VOICE PROMPT:

“SEARCHING ...”

SECURE FIT

ENJOY

UNDER

NOW THAT YOU KNOW YOUR

PREFERRED EAR TIP & CUSHION...

and have a sense of the audio performance without

other distractions, you are ready for over-ear fitting.

REMOVE THE SECURE FIT EAR CUSHIONS.

YOU WILL INSTALL THEM DIFFERENTLY THIS TIME.

ADVANCED

OVER-EAR

FIT OPTION

FURTHER TO THE MENTION ON THE BOX...

OVER-EAR FIT IS DEDICATED TO MUSIC, NOT DESIGNED FOR CALLS.

IT LIBERATES SPORTS MUSIC LISTENING BY LIFTING THE CORD OFF THE NECK,

AND SHIFTS THE MIC BEHIND THE EAR.

SOME ADJUSTMENT TIME IS NEEDED WHEN SWITCHING BETWEEN FIT OPTIONS.

WHEN WORN OVER-EAR:

CONTROLLER ON

LEFT

side

NOTE EARTIPS ANGLE INWARDS (FORWARDS) & UPWARDS,

FOLLOWING THE DIRECTION OF YOUR EAR CANAL.

L&R ORIENTATION

SECURE FIT

TAKE YOUR PREFERRED SIZED

SECURE FIT EAR CUSHION AND

INSTALL IN REVERSE DIRECTION

WITH POINTED END NEXT TO CORD.

IMPORTANT:

Check your size preference in under-ear

mode first as it can be difficult to tell in over-ear mode,

and may be different to other JayBird products.

CORD MANAGEMENT CLIPS

INSERT CORD INTO 2 OF THE 3 SLOTS IN EACH CLIP AS SHOWN OMITTING THE FINAL

ROUNDED SLOTS.

- PUT THE HEADPHONES ON, USING INDEX FINGER TO PUSH TIP OF EAR CUSHION

INTO PLACE TO SECURE EARBUDS (A MIRROR HELPS FIRST TIME).

- WITH EARBUDS SECURED, ADJUST POSITION OF CORD MANAGERS (PULLING

TOO TIGHT WILL OF COURSE DISLODGE EARBUDS, KEEP A LITTLE SLACK).

CONTR

OLLER

LEFT

EAR

TAKE OFF HEADPHONES, INSERT CORD INTO THE FINAL ROUNDED SLOTS, PUT

HEADPHONES BACK ON, NOW YOU ARE READY TO GO!

Over-ear mode requires less cord, so before fitting, install the cord management clips to secure the slack for a customized fit.

See next steps.

ENJOY

IN THE BOX

BlueBuds X Bluetooth Headphones

JayBird Carry Case

3 pairs eartips (S,M,L)

3 pairs ear cushions (S,M,L)

2 cord management clips

USB Cable

User Manual

CHARGING

Charging the battery before use is recommended

but not required. BlueBuds X ships pre-charged

however initial charge will vary.

Look for this Bluetooth headset battery status

icon top right corner of your iPhone screen to

see status of BlueBuds X battery.

PAIRING (SETTING UP) HEADPHONES WITH YOUR PHONE / MUSIC DEVICE

1. With headphones turned off, & within 1 meter (3 feet) of music device, press & hold

center key for more than 4 seconds until you see alternating red/green flashing

of the status indicator and a voice prompt saying “Searching for your music device”.

2. On your phone/music device, turn Bluetooth on & have it search for Bluetooth devices

(see instructions in the phone/music device manual for details).

3. Check for “BlueBuds X” and select (enter passcode 0000 if prompted).

4. BlueBuds X voice prompt will say “headphones connected”.

5. If the pairing is not successful, switch off headphones by pushing the center key for

more than 4 seconds and repeat the steps outlined above.

PAIRING WITH A BLUETOOTH ADAPTER

1. Place headphones and mobile phone within 1 meter (3 feet) of each other.

2. Put the headphones into pair mode as outlined on prior page.

3. If using BAU Universal Bluetooth Adapter put into pair mode also (see BAU manual).

4. Plug the Bluetooth adapter into the music device and play a song.

5. The headphones and adapter will pair automatically

(passcode of adapter must be 0000).

6. After successful pairing and connecting, the headphones will say

“Headphones connected”.

PAIRING WITH SEVERAL BLUETOOTH DEVICES

Paired devices will remember each other unless pairing information is deleted,

so there is no need to pair again. BlueBuds X can pair and remember 8 phone/music

devices. Repeat the steps outlined on prior pages to set-up your headphones with

another phone/music device. Note that if a 9th phone/music devices is paired the

oldest pairing information is deleted. BlueBuds X will connect with the latest connected

device. If you want to use another paired phone/music device, switch off the Bluetooth

function of the current Bluetooth device, and then connect it with the other

phone/music device by selecting “BlueBuds X” in the Bluetooth device list and

press connect. Turn the originally paired device back on to reconnect and switch

between either of the devices.

Bluetooth Version V2.1 + EDR (newer versions offer no benefits for headphones)

SBC codec

Customised SBC codec offers high fidelity without needing APT-X

Profile

Handsfree v1.6, Headset v1.1, A2DP v1.2 and AVRCP v1.4

Effective Range 10 meters (30 feet)

Working time

Music & calls up to 8 hours

Standy time

Up to 250 hours

Input voltage

DC 5V 100mA

Charging time

Approximately 2 hours

Dimensions

23 x 13 mm earbud size, 540 mm cord length

Weight

Approx 13 g

WARRANTY, CARE & MAINTANCE

Full warranty, care and maintenance details at jaybirdgear.com/warranty

+1.866.244.3399

WARNING: Due to the isolating characteristics of these headphones do not use while driving, riding a bike or where vehicular traffic

is present, or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at

excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to

inserting objects into ear canal, use at own risk.

Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to JayBird, LLC. iPhone is a trademark of Apple, Inc., registered

in the U.S. and other countries. Manufactured under European patent no EP1410607B1 & corresponding foreign patents. Assembled in China.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications to device will void the user’s authority to operate the device. The battery is recycled.

Do not dispose of the battery in fire, as it may cause explosion.

SPECIFICATIONS

LED STATUS

Red: Charging

Green (with USB cable connected): Charged

Red+Green Alternating: Pair Mode

No Light: Standby / Play Mode / Powered Off

VOICE PROMPT

“BATTERY LOW”

Approx 15 mins

prior to empty

MICRO USB CHARGING

Locate fingernail recess

and remove back cover to

expose micro USB charge

point. 2+ hrs for full charge

gives 8 hours of playtime.

30 mins charging gives

90 minutes of play time.

ARE HEADPHONES ON? IS BATTERY LOW?

In Standby

mode, push + or -, watch LED:

Green = Powered on and well charged

Red = Low battery

No Light = Powered off

Standby Mode:

Powered on but not connected to any device

PAIR MODE: LED ALTERNATES RED/GREEN

DETAILED INSTRUCTIONS

BEGIN WITH THE TRADITIONAL

UNDER-EAR

FIT OPTION

TO DETERMINE YOUR SIZES

LISTEN RESPONSIBLY

Avoid excessive volume levels

and prolonged periods of listening.

Do not use around road traffic.

HAVE FUN

Your ear canal travels up and forward.

The intelligent patent pending BlueBuds

X angles to the same direction in either

wearing style, encouraging a great,

snug fit.

HOLD

4 SEC

PAIR

VOICE PROMPT:

When you hear “Power on” continue pushing until you hear

“SEARCHING FOR YOUR MUSIC DEVICE ...”

UNDER

OVER

TAKE A MOMENT TO REGISTER YOUR

LIFETIME WARRANTY AGAINST SWEAT

jaybirdgear.com/intheclubnow

COMMANDS

Add’l Center Button Call Commands

PUSH

1 SEC PUSH

4 SEC PUSH

QUICK FIND

SETUP

UNDER-EAR SETUP AND SOUND CHECK

OVER-EAR SETUP

DETAILED INSTRUCTION

IN-THE-BOX

CHARGING & BATTERY STATUS

PAIRING

COMMANDS

SPECS & WARRANTY

..........................................................2

............................................................................................12

.....................................................................................................27

.......................................................................27

...........................................................................................................29

......................................................................................................33

........................................................................................34

INSIDE THE ACCESSORIES PACKET

OFF

Answer 2nd call, end call

Reject 1st/2nd call, switch

between 2 calls, voice dial

Redial

Mute & unmute call: push + & -

Switch active call to BlueBuds X: push -