Cables - c20 through c21.
Cables for gateway 20 through 21 page 1 © jbm electronics co. 1-800-489-7781 www.Jbmelectronics.Com file name: cable_c20_c21.Doc revision date: march 23, 2006 revision level: 1.0 fcc notice warning: this equipment generates, uses, and can radiate radio frequency energy; and if not installed and used...
Cables for gateway 20 through 21 page 2 © jbm electronics co. 1-800-489-7781 www.Jbmelectronics.Com c20 –c21 port cable description cable order number table serial 9f to 9m dce cable 6foot c/9sf-9m-dce-6’ pg. 3 9f to 25m dce cable 6foot c/9sf-25m-dce-6’ pg. 3 9f to 9f straight gender changer c/9ff-x...
Cables for gateway 20 through 21 page 3 © jbm electronics co. 1-800-489-7781 www.Jbmelectronics.Com 9f to 9m/f (dce) this table lists the required rs-232 wiring required to provide a dce interface for a gateway comm. Port. The pins should be connected from one connector to the other using the transp...
Cables for gateway 20 through 21 page 4 © jbm electronics co. 1-800-489-7781 www.Jbmelectronics.Com 25f to 25f gender changer this is used to change a 9-pin male end connector to female. Units supported • c20 jbm electronics part number: c/9ff-xgender 25f to 25f gender changer this is used to change...
Cables for gateway 20 through 21 page 5 © jbm electronics co. 1-800-489-7781 www.Jbmelectronics.Com rj-45 straight this table lists the ethernet pins used in the ethernet port eth0. For a straight-wired connection the pins should be connected from one connector to the other without transpositions or...
Cables for gateway 20 through 21 page 6 © jbm electronics co. 1-800-489-7781 www.Jbmelectronics.Com rj-11 straight this table lists the required pins used in the modem cable used to connect the gateways to an asynchronous modem. Pins should be connected from one rj-11 connector to the other without ...
