S h a b a k a c a l i b r e c l a 8 8 q p r m b y c h r i s to p h e c l a r e t ow n e r’ s m a n ua l.
Pushpiece to set the month and the year (set into the crown) winding and setting crown pusher b: to advance the entire calendar (one day at a time) pushpiece to set the moon (set into the case) moon phases leap-year cycle indicator slide to activate the minute-repeater hammer striking the minutes ha...
1 . W i n d i n g your shabaka watch has a manually wound movement. Wind the watch by turning the crown forward. The winding mechanism is disengaged if the crown is turned back. Stop winding if you feel any resistance, this is the sign that your watch is fully wound. When it is fully wound, your wat...
3 . S e t t i n g t h e p e r p e t u a l c a l e n d a r 3 . 1 s e t t i n g t h e d a t e start by unlocking pusher b by opening its safety catch beneath the watch. Press pusher b to advance the calendar a day at a time until the correct date is shown (ignore the fact that the days cylinder is tur...
3 . 3 s e t t i n g t h e m o n t h a n d t h e y e a r first, determine the status of the year in the leap-year cycle (leap year or the 1 st , 2 nd or 3 rd year). Use the stylus provided in the presentation case to press the pushpiece set into the crown of the watch. This advances the months as wel...
The minutes hammer and the hours hammer the gong for the minutes and the gong for the hours 4 . S t a t e - o f - w i n d i n d i c a t o r the mainspring, visible in its barrel through the back of the watch, shows if your watch needs winding. 5 . M i n u t e - r e p e a t e r the minute-repeater st...
P r e s e n t a t i o n c a s e w i t h e l e c t r i c w i n d e r a n d s o u n d b o a r d the presentation case of your watch is fitted with a tray in macassar ebony holding a winding motor designed to be used only with the jean dunand shabaka watch (calibre cla88qprm). A soundboard crafted from...
R e m o v i n g t h e w a t c h warning! To remove your watch from the winder, move the lever to the stop position and ensure that the mechanism is disengaged from the winding crown. If you want your watch to be fully wound before removing it, shift the lever to stop and then to start. It will then ...
