JedMark Acorn Ltl-5210M User Manual

Manual is about: Remote Cellular Scouting Camera

Summary of Acorn Ltl-5210M

  • Page 1

    Ltl acorn remote cellular scouting camera ltl-5210m series user’s manual http://www.Jedmark.Co.Uk.

  • Page 2: Table Of Contents

    - 1 - table of contents general information ....................................................................................................................... 2 1.1 features ............................................................................................................................

  • Page 3: General Information

    General information - 2 - general information 1.1 introduction the ltl acorn m series (model ltl-5210mc and ltl-5210mm) are the second generation of our ltl-5210 scouting camera. Bundled with the mms-module (multimedia messaging service) battery box (part # ltl-mm), the standard scouting camera (par...

  • Page 4

    General information - 3 - automatically send text alert when battery power level goes low check cellular signal information on the built-in tft display in the field all mms pictures, as well as the original ones, saved on sd card internal antenna design makes the camera portable while still emitting...

  • Page 5

    General information - 4 - figure 1.1: front view of ltl-5210m figure 1.2: bottom view of ltl-5210m http://www.Jedmark.Co.Uk.

  • Page 6

    General information - 5 - the camera provides the following connections for external devices: usb 2.0 port, sd card slot, tv out jack, and external dc power in jack. The 3-way power/mode switch is used to select the main operation modes: off, on and test. To power up the camera, install four new hig...

  • Page 7: Quick Start

    Quick start - 6 - quick start 2.1 insert sim card (only for model ltl-5210mm) you need to purchase the sim card from your local mobile phone network operators (mpno), making sure they provide multimedia messaging service (mms). Ask them for the relevant information to configure the mms settings on y...

  • Page 8

    Quick start - 7 - slot, please make sure the write-protect switch on the side of the sd card is “off” (not in the “lock” position). The supported memory capacity is up to 32gb. If you use a card capable of above 32gb, make sure you test it before putting the camera in use. Figure 2-2 caution: always...

  • Page 9

    Quick start - 8 - under the test mode, one useful function you would like is testing the work area of the pir (passive infrared) sensor, specifically the sensing angle and distance. To perform the test: first strap the camera on a tree aiming the region of interest (roi). Walk slowly from one side o...

  • Page 10

    Quick start - 9 - in the case the game browses only in the pir area of the prep sensors, to avoid the camera being powered on constantly, the system is designed to work in the following way: if the game does not enter the pir area of the main sensor and therefore not trigger the main sensor, the cam...

  • Page 11: Advanced Settings

    Advanced settings - 10 - advanced settings the ltl acorn trail camera comes with preset manufacturer settings. You can change the settings to meet your requirements. Please make sure the camera is in the test mode. 3.1 parameter settings press “menu” key to enter/exit the menu. Press , to move the m...

  • Page 12

    Advanced settings - 11 - still photos only) 03 photos sequence per burst in camera mode. Please also refer to the interval parameter. Video length (affects video clips only) avi 10 s, optional from 1s to 60s videos are in avi format that can be played back on most media players. Interval 1 min, opti...

  • Page 13

    Advanced settings - 12 - time lapse off, on if set on, the camera will automatically take photos/videos at the set interval (note: in this mode, the pir sensor is disabled). This is helpful when observing cold-blooded animals like snakes, or the process of flowering, etc. This feature can work toget...

  • Page 14

    Advanced settings - 13 - 3.2 file format the sd card stores all original pictures and videos in the folder \dcim\100image, and all mms pictures in the folder \mms\ with the same filename. Pictures are saved with filenames like imag0001.Jpg and videos like imag0001.Avi. In the off mode, you can use t...

  • Page 15

    Advanced settings - 14 - set up the camera based on your need. Click on to retrieve the computer time. Click on to choose the directory to save your settings, usually under the root directory of the sd card (you need to insert the sd card in the sd card reader and plug it in your computer.) then, cl...

  • Page 16

    Advanced settings - 15 - attention: the password can only be set up on the camera, not on the pc. 3.4 set up mms function on pc after you click on exit on the camera setup interface, the following window prompts again: click on mms setup, and you will see the following interface: http://www.Jedmark....

  • Page 17

    Advanced settings - 16 - first, you need to choose how you like to set up the mms mode --auto or manual. If you choose auto, then you need to choose the country and the mobile phone network operator (mpno). Input the phone number and/or email address you’d like the mms pictures to be sent to. You ca...

  • Page 18

    Advanced settings - 17 - meets the following requirements. The camera is on and functions. The sd card has enough space. 8 aa batteries with enough power capacity. The camera is in cam mode or cam+video mode, not video mode. Sim card is installed. The mms service is activated (some mms services need...

  • Page 19

    Advanced settings - 18 - there are three bars indicating the signal strength. To make the mms module to work, at least one bar is required. If a code, instead of the mpno information, shows on the screen, it indicates something is wrong, missing, or going on. Specifically, sim: no sim card or instal...

  • Page 20

    Advanced settings - 19 - function may not perform normally. When trying to view the operator’s name and the signal strength, if you wait less than one minute before detaching the battery box, you will more than likely see one of the codes aforementioned. You need to switch the camera to off position...

  • Page 21: Ltl-5210M Series Products

    Ltl-5210m series products - 20 - ltl-5210m series products 4.1 ltl-5210m series consists of three parts: 1. Ltl-5210m camera 2. Ltl-bm1 standard battery box (without mms-module) 3. Ltl-mm1 mms-module battery box 4.2 models for purchase: ltl-5210mm = ltl-5210m camera + ltl-mm1 mms-module battery box ...

  • Page 22: Important Information

    Important information - 21 - important information 5.1 prevent from short-circuits there are five electric contacts above the tft display on the camera and five probes above the battery compartment of the battery box, respectively. Never touch these electric contacts and probes with any metallic mat...

  • Page 23

    Important information - 22 - take more clips of more events. As a result, the total number of video clips doubles, even triples that of products of its kind, which provides users with more useful records. Note: our camera performs at extreme cold environment as low as -30°c (-22°f), in which the bat...

  • Page 24

    Important information - 23 - 5.7 faqs on mms function i set up a new receiving phone number. But the mms pictures are still being sent to the old number. What should i do? Switch the camera off. Wait for at least two minutes. Then switch it on. Or, switch the camera off. Take one battery out of the ...

  • Page 25: Firmware Upgrades

    Firmware upgrades - 24 - firmware upgrades 6.1 firmware upgrades the manufacturer reserves the right to upgrade the camera and the firmware. Follow the steps below to implement the upgrades: back up the contents on the sd card on your computer. Install batteries and the sd card in the camera. Format...

  • Page 26: One Year Limited Warranty

    Warranty information - 25 - we take great pride in our products. We always stand behind our promises. We provide a leading limited warranty. We guarantee our products to be free of defects in materials and workmanship under normal use cover damages caused by consumers’ misuse, abuse, or improper han...

  • Page 27

    Appendix i: technical specification - 26 - appendix i: technical specification model parameters ltl-5210mc ltl-5210mm image sensor 5 mega pixels color cmos yes yes max. Pixel size 2560x1920 yes yes lens f=3.1; fov=52°; auto ir-cut yes yes ir flash 65 feet/20 meters; 30 feet/10 meters on low-glow fla...

  • Page 28

    Appendix i: technical specification - 27 - mms e-mail 0 ~ 3 e-mail addresses upgradable yes low-battery sms alert “battery low” text alert sent upgradable yes power supply 4xaa; expandable to 8xaa yes yes external dc power supply plug size: 4.0x1.7 6 ~ 12v (1 ~ 2a) yes yes stand-by current 0.4ma yes...

  • Page 29

    Appendix ii: package contents - 28 - appendix ii: package contents part name quantity (ltl-5210mc) quantity (ltl-5210mm) ltl-mm1 mms-module battery box digital camera 1 1 0 additional battery box 1 (standard) 1 (with mms module) 1 (with mms module) tv av in cable 1 1 0 usb cable 1 1 0 strap 1 1 0 ex...

  • Page 30: Battery Box

    Appendix iii: instruction on installing battery box - 29 - appendix iii: instruction on installing battery box http://www.Jedmark.Co.Uk.