1. DL manuals
  2. Jeep
  3. Automobile Accessories
  4. Automobile
  5. Owner's Manual

Jeep Automobile Owner's Manual

Manual is about: Chrysler LLC

Summary of Automobile

  • Page 1

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3 understanding the fea...

  • Page 3: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ▫ roll over warning . . . . . . . . . . . . . . . . . . . . . 4 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 6 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 8 䡵 vehicle identi...

  • Page 4

    Introduction thank you for selecting a jeep 威 grand cherokee srt8 and welcome to our worldwide family. Before you start to drive this vehicle, read this manual. Be sure you are familiar with all vehicle controls, particu- larly those used for braking, steering and transmission shifting. Learn how yo...

  • Page 5

    Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year, and could reduce disabling injuries by 2 million annually...

  • Page 6

    When it comes to service, remember that your authorized dealer knows your vehicle best, has the factory-trained technicians and genuine mopar 威 parts, and is interested in your satisfaction. Warning! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals k...

  • Page 7

    Introduction 7 1.

  • Page 8

    Warnings and cautions this manual contains warnings against operating procedures which could result in an accident or bodily injury. It also contains cautions against procedures which could result in damage to your vehicle. If you do not read this entire manual you may miss important information. Ob...

  • Page 9

    Vehicle modifications / alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. Introduction 9 1.

  • Page 11: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . .14 ▫ ignition key removal . . . . . . . . . . . . . . . . . . .14 ▫ key-in-ignition reminder . . . . . . . . . . . . . . . .15 䡵 sentry key immobilizer system . . . . . . . . . . . . . .1...

  • Page 12

    ▫ transmitter battery service . . . . . . . . . . . . . . .23 䡵 remote starting system — if equipped . . . . . . . .24 䡵 door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 ▫ manual door locks . . . . . . . . . . . . . . . . . . . . .26 ▫ power door locks — if equipped . . . . . . ....

  • Page 13

    ▫ safety checks you should make inside the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 ▫ safety checks you should make outside the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 things to know before starting your vehicle 13 2.

  • Page 14

    A word about your keys the keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your authorized dealer to give you the number. The key code can also be obtained by your authorized dealer from your vehicle invoice. Igni...

  • Page 15

    Warning! Leaving children in a vehicle unattended is danger- ous for a number of reasons. A child or others could be injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector lever. Don’t leave the keys in the ignition. A child could operate power windows, o...

  • Page 16

    Light will come on for 3 seconds immediately after the ignition switch is turned on for a bulb check. Afterwards, if the bulb remains on, this indicates a malfunction in the electronics. If the bulb begins to flash immediately after the ignition switch is turned on, this indicates that an invalid ke...

  • Page 17

    Replacement keys note: only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Once a sentry key has been programmed to a vehicle, it cannot be programmed to any other vehicle. At the time of purchase, the original owner is provided with a four digit pin numb...

  • Page 18

    4. Insert a blank sentry key into the ignition switch and turn the ignition switch on within 60 seconds. After 10 seconds, a single chime will sound. The skim indicator light will stop flashing, turn on for 3 seconds; then turn off. The new sentry key has been programmed. Repeat this process to prog...

  • Page 19

    The door lock plunger located on the inside of the doors or with the driver’s door key lock cylinder, will not set the alarm. To disarm the system to disarm the system, use the remote keyless entry transmitter. Also, using a valid sentry key and moving the ignition switch to the on/start position wi...

  • Page 20

    Note: if the key is in the ignition switch, then all buttons on that transmitter will be disabled. The buttons on the remaining transmitters will work. If the vehicle is shifted out of p (park), all the transmitter buttons are disabled for all keys. To unlock the doors press and release the “unlock”...

  • Page 21

    Note: if desired, the system can be programmed to unlock all doors on the first press of the “unlock” button. Refer to “remote unlock driver’s door 1st” in the personal settings section of the “electronic vehicle infor- mation center (evic)”, or simply follow these steps: 1. Press and hold the “lock...

  • Page 22

    Warning! Driving with the flipper glass open can allow poi- sonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the flipper glass closed when you are operating the vehicle. Using the panic alarm to turn the panic alarm feature on or off, press and ho...

  • Page 23

    2. While the “unlock” button is pressed, (after 4 seconds) press the “lock” button. Release both buttons. The “flash lights on lock/unlock” feature can be reactivated by repeating this procedure. General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. O...

  • Page 24

    1. With the transmitter buttons facing down, remove the small screw, and separate the two halves of the transmit- ter. Make sure not to damage the rubber gasket during removal. 2. Remove and replace the battery. Avoid touching the new battery with your fingers. Skin oils may cause battery deteriorat...

  • Page 25

    To remote start your vehicle, press the “lock” button on the key fob once, then within three seconds press the “remote start” button twice. To indicate that the vehicle is about to start, the parking lights will flash and the horn will sound briefly. Once the vehicle has started, the engine will run...

  • Page 26

    The vehicle can be started remotely up to a maximum of two times. The vehicle is also allowed a maximum of one failed start, where the remote start sequence was initiated but cancelled before the engine begins to crank. After either of these conditions, or if the vehicle theft alarm is alarming, or ...

  • Page 27

    If the plunger is down when the door is closed, the door will lock. Therefore, make sure the keys are not inside the vehicle before closing the door. If you press the door lock switch while the keys are in the ignition switch, and the driver’s door is open, the doors will not lock. The rear doors ca...

  • Page 28

    Child protection door lock the rear doors of your vehicle are equipped with child protection locks. If you push up on the lever on the open edge of the door it cannot be opened from the inside of the vehicle. Push the lever down to disengage the child protection locks. Warning! Avoid trapping anyone...

  • Page 29

    Windows power windows the power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door/rear doors which operates the front passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the on or ...

  • Page 30

    Auto down both the driver and front passenger window switch has an “auto down” feature. Press the window switch past the first detent, release, and the window will go down automatically. To cancel the “auto down” movement, operate the switch in either the up or down direction and release the switch....

  • Page 31

    Warning! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the auto-up feature should the auto-up feature stop working the window probably needs to be reset. To reset auto-up: pull the window switch up and close...

  • Page 32

    Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occur- rence and ...

  • Page 33

    Warning! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your pas- sengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. Liftgate flipper glass the liftgate flipper glass is also unlocked when the liftgate is...

  • Page 34

    Once the liftgate flipper glass has been opened, connec- tion to the rear window wiper is interrupted, preventing activation of the rear wiper blade while the flipper glass is open. Note: if a power malfunction to the power liftgate latch should occur, an emergency liftgate latch release can be used...

  • Page 35

    Warning! In a collision, you and your passengers can suffer injuries, including fatalities, if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up prope...

  • Page 36

    Warning! • wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best. Wearing your belt in the wrong place could make your injuries in a collision much wo...

  • Page 37

    3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” latch plate latch plate to buckle things to know before starting your vehicle 37 2.

  • Page 38

    Warning! A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. A belt that is too loose will not protect you as well. In a sudden stop you ...

  • Page 39

    5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in the belt. 6. To release the belt, push the red button marked press on the buckle. The belt will automatically retract to its stowed position. If necessary, sli...

  • Page 40

    Adjustable upper shoulder belt anchorage in the front seating positions, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Press the release button to release the anchorage, and then move it up or down to the position that serves you best. As a guide, if ...

  • Page 41

    3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. How to disengage the automatic locking mode disconnect the combination lap/shoulder belt and allow it to retract completely to disengage the automa...

  • Page 42

    Note: these devices are not a substitute for proper seat belt placement by the occupant. The seat belt must still be worn snugly and positioned properly. The pretensioners are triggered by the occupant re- straint control (orc) module. Like the front airbags, the pretensioners are a single use item....

  • Page 43

    Driver and front passenger supplemental restraint systems (srs) this vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the steering wheel. The passenger side airbag is mounted in the instrumen...

  • Page 44

    This vehicle is equipped with window bags to protect the driver, front, and rear passengers sitting next to a win- dow. They are located above the side windows. Their covers are also labeled srs/airbag. Note: airbag covers may not be obvious in the interior trim; but they will open to allow airbag d...

  • Page 45

    Note: do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the window bags. The front airbags have a multi stage inflator design. This allows the airbag to have different rates of inflation that are based on collision severity. Alo...

  • Page 46

    Children that are not big enough to properly wear the vehicle seat belt should be secured in the rear seat, in a child restraint or belt-positioning booster seat. Older children who do not use child restraints or belt- positioning booster seats should ride properly buckled up in the rear seat. Never...

  • Page 47

    Warning! • relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly. In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags. • being too close to the steering wh...

  • Page 48

    How the airbag system works • the occupant restraint control (orc) module de- termines if a frontal, side, or rollover collision is severe enough to require the front and/or side airbags to inflate. The front airbag inflators are designed to provide different rates of airbag inflation from direc- ti...

  • Page 49

    • the driver and passenger airbag/inflator units are located in the center of the steering wheel and the right side of the instrument panel. When the orc detects a collision requiring the airbags, it signals the inflator units. A large quantity of nontoxic gas is generated to inflate the front airba...

  • Page 50

    If a deployment occurs the airbag system is designed to deploy when the occupant restraint control (orc) module detects a moderate-to-severe frontal collision, to help restrain the driver and front passenger, and then to immediately deflate. Note: a frontal collision that is not severe enough to nee...

  • Page 51

    Warning! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioners, and seat belt retractor assem- bly, replaced by an authorized dealer as soon as possible. Enhanced accident response feature if the airbags deploy after an impact...

  • Page 52

    Airbag warning light you will want to have the airbag system ready to inflate for your protection in an impact. The airbag system is designed to be maintenance free. If any of the following occurs, have an authorized dealer service the system promptly: • does not come on during the 6 to 8 seconds af...

  • Page 53

    Provided to the custodial entity upon request. General data that does not identify particular vehicles or crashes may be released for incorporation in aggregate crash databases, such as those maintained by the us govern- ment and various states. Data of a potentially sensitive nature, such as would ...

  • Page 54

    Child restraint everyone in your vehicle needs to be buckled up all the time — babies and children, too. Every state in the united states and all canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. Children 12 y...

  • Page 55

    • the infant carrier is only used rearward-facing in the vehicle. It is recommended for children who weigh up to about 20 lbs (9 kg). “convertible” child seats often have a higher weight limit in the rearward-facing direction than infant carriers do, so they can be used rearward-facing by children w...

  • Page 56

    Here are some tips for getting the most out of your child restraint: • before buying any restraint system, make sure that it has a label certifying that it meets all applicable safety standards. The manufacturer also recommends that you try a child restraint in the vehicle seats where you will use i...

  • Page 57

    • in the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it. Inser...

  • Page 58

    With knees bent over the vehicle’s seat cushion while the child’s back is against the seat back, they should use a belt-positioning booster seat. The child and belt- positioning booster seat are held in the vehicle by the lap/shoulder belt. Children too large for booster seats children who are large...

  • Page 59

    Belts. Child restraints having tether straps and hooks for connection to the top tether anchorages have been avail- able for some time. For some older child restraints, many child restraint manufacturers offer add-on tether strap kits or retro-fit kits. You are urged to take advantage of all the ava...

  • Page 60

    The vehicle’s seat belts. Please refer to the next section for typical installation instructions. Installing the latch-compatible child restraint system we urge that you carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be ...

  • Page 61

    In addition, there are tether strap anchorages behind each rear seating position located on the back of the seat. Many, but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjustin...

  • Page 62

    Warning! Improper installation of a child restraint to the latch anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. Installing child restraints using th...

  • Page 63

    If the belt still can’t be tightened, or if by pulling and pushing on the restraint loosens the belt, you may need to do something more. Disconnect the latch plate from the buckle, turn the buckle around, and insert the latch plate into the buckle again. If you still can’t make the child restraint s...

  • Page 64

    Warning! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Transporting pets airbags deploying in the front seat could harm your pet. An...

  • Page 65

    A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the break-in and not interpreted as an indication of difficulty. Safety tips exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monox...

  • Page 66

    Safety checks you should make inside the vehicle seat belts inspect the belt system periodically, checking for cuts, frays and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced after an accident if they have been d...

  • Page 67

    Safety checks you should make outside the vehicle tires examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect for tread cuts or sidewall cracks. Check wheel nuts for tightness and tires (includ- ing spare) for pr...

  • Page 69: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 ▫ automatic dimming mirror . . . . . . . . . . . . . . .74 ▫ outside mirrors . . . . . . . . . . . . . . . . . . . . . . .75 ▫ exterior mirrors folding feature . . . . . . . ...

  • Page 70

    ▫ front seat adjustment — recline . . . . . . . . . . 101 ▫ manual lumbar support adjustment . . . . . . . 102 ▫ 8 - way driver’s power seat . . . . . . . . . . . . . . 102 ▫ 4 - way passenger’s power seat — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . 103 ▫ head restraints . . . . ...

  • Page 71

    ▫ high beam switch . . . . . . . . . . . . . . . . . . . . 119 ▫ passing light . . . . . . . . . . . . . . . . . . . . . . . . 119 ▫ headlight time delay . . . . . . . . . . . . . . . . . . 119 ▫ interior lights . . . . . . . . . . . . . . . . . . . . . . . 119 ▫ front map/reading lights . . . . . ....

  • Page 72

    ▫ esp/bas warning lamp and esp/tcs indicator light . . . . . . . . . . . . . . . . . . . . . . . 136 䡵 rear park assist system— if equipped . . . . . . . 137 ▫ rear park assist sensors . . . . . . . . . . . . . . . . 138 ▫ rear park assist warning display . . . . . . . . . 138 ▫ enable/disable the r...

  • Page 73

    ▫ venting sunroof - express . . . . . . . . . . . . . . . 154 ▫ sunshade operation . . . . . . . . . . . . . . . . . . . 154 ▫ wind buffeting . . . . . . . . . . . . . . . . . . . . . . . 154 ▫ sunroof maintenance . . . . . . . . . . . . . . . . . . . 155 ▫ ignition off operation . . . . . . . . . ....

  • Page 74

    Mirrors automatic dimming mirror this mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will indicate when the dimming feature is activated. Automatic dim...

  • Page 75

    Caution! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Outside mirrors to receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a...

  • Page 76

    Driver’s outside automatic dimming mirror — if equipped if your vehicle is equipped with a driver’s outside automatic dimming mirror, it operates when the inside automatic dimming mirror is on. This outside mirror operates off the inside mirror switch and will automati- cally adjust for annoying hea...

  • Page 77

    Heated remote control mirrors — if equipped these mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defrost. Lighted vanity mirrors — if equipped to access a lighted vanity mirror, flip down one of the visors. Lift the cover to reveal the mirror....

  • Page 78

    Hands–free communication (uconnect™) — if equipped uconnect™ is a voice-activated, hands-free, in- vehicle communications system. Uconnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.G., ⬙ call” ѧ “mike” ѧ ”work ⬙ or ⬙ dial” ѧ “248-555-1212 ⬙ ). Your ce...

  • Page 79

    The uconnect™ system can be used with any hands- free profile certified bluetooth™ cellular phone. See www.Chrysler.Com/uconnect for supported phones. If your cellular phone supports a different profile (e.G., headset profile), you may not be able to use any ucon- nect™ features. Refer to your cellu...

  • Page 80

    • prior to giving a voice command, one must wait for the voice on beep, which follows the ⬙ ready ⬙ prompt or another prompt. • for certain operations, compound commands can be used. For example, instead of saying ⬙ setup ⬙ and then ⬙ phone pairing, ⬙ the following compound command can be said: ⬙ se...

  • Page 81

    Pair (link) uconnect™ system to a cellular phone to begin using your uconnect™ system, you must pair your compatible bluetooth™ enabled cellular phone. Note: the uconnect™ system use requires a cellular phone equipped with the bluetooth ⬙ hands-free profile, ⬙ version 0.96 or higher. See www.Chrysle...

  • Page 82

    • you will then be asked to give your cellular phone a priority level between 1 and 7, 1 being the highest priority. You can pair up to seven cellular phones to your uconnect™ system. However, at any given time, only one cellular phone can be in use, connected to your uconnect™ system. The priority ...

  • Page 83

    • system will prompt you to say the name of the person you want call. • after the ⬙ ready ⬙ prompt and the following beep, say the name of the person you want to call. For example, you can say ⬙ john doe, ⬙ where john doe is a previ- ously stored name entry in the uconnect™ phone- book. Refer to ⬙ a...

  • Page 84

    The uconnect™ system will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations. Each language has a separate 32-name phonebook accessible only in that language. Edit entries in the uconnect™ phonebook note: editing phonebook en...

  • Page 85

    • after the ⬙ ready ⬙ prompt and the following beep, say ⬙ phonebook delete. ⬙ • after you enter the phonebook delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say ⬙ list names ⬙...

  • Page 86

    • the uconnect™ system will play the names of all the phonebook entries. • to call one of the names in the list, press the ⬙ voice recognition’ button during the playing of the desired name, and then say ⬙ call. ⬙ note: the user can also exercise ⬙ edit ⬙ or ⬙ delete ⬙ operations at this point. • th...

  • Page 87

    Making a second call while current call in progress to make a second call while you are currently in a call, press the ’voice recognition’ button and say ⬙ dial ⬙ or ⬙ call ⬙ followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in ...

  • Page 88

    Call termination to end a call in progress, momentarily press the ⬘ phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. Redial • press the ’phone’ button to begin. • after the ⬙ ready ⬙ prompt and the following beep, say ⬙ red...

  • Page 89

    • after the ⬙ ready ⬙ prompt and the following beep, say the name of the language you wish to switch to (english, espanol, or francais, if so equipped). • continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will b...

  • Page 90

    Your phone must be turned on and paired to the ucon- nect™ system to allow use of this vehicle feature in emergency situations when the cell phone has network coverage and stays paired to the uconnect™ system. Towing assistance if you need towing assistance, • press the ’phone’ button to begin. • af...

  • Page 91

    When calling a number with your uconnect™ system that normally requires you to enter in a touch-tone sequence on your cellular phone keypad, you can push the ’voice recognition’ button and say the sequence you wish to enter followed by the word ⬙ send. ⬙ for example, if required to enter your pin nu...

  • Page 92

    Dialing using the cellular phone keypad you can dial a phone number with your cellular phone keypad and still use the uconnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired bluetooth™ cel...

  • Page 93

    Information service when using at&t wireless service, dialing to phone number ⬙ #121, ⬙ you can access voice activated automated system to receive news, weather, stocks, traffic, etc. Related information. Advanced phone connectivity transfer call to and from cellular phone the uconnect™ system allow...

  • Page 94

    Select another cellular phone this feature allows you to select and start using another phone with the uconnect™ system. The phone must have been previously paired to the uconnect™ system that you want to use it with. • press the ’phone’ button to begin. • after the ⬙ ready ⬙ prompt and the followin...

  • Page 95

    • speak normally, without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. • make sure that no one other than you is speaking during a voice recognition period. • performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle s...

  • Page 96

    Far end audio performance • audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, and • dry weather condition. • operation from driver seat. • performance, such as audio clarity, echo, and lou...

  • Page 97

    Understanding the features of your vehicle 97 3.

  • Page 98

    98 understanding the features of your vehicle.

  • Page 99

    Understanding the features of your vehicle 99 3.

  • Page 100

    North american english primary alternate(s) zero oh add location add new all all of them confirmation prompts confirmations prompts delete a name delete language select language list names list all list paired phones list phones pager beeper phone pairing pairing phonebook phone book return to main ...

  • Page 101

    Front seat adjustment — recline to adjust the seatback, lift the lever located on the outboard side of the seat, lean back, and release the lever at the desired position. To return the seatback, lift the lever, lean forward, and release the lever. Warning! Do not ride with the seatback reclined so t...

  • Page 102

    Manual lumbar support adjustment the manual lumbar support adjustment lever is located on the right side of the driver’s seat and on the left side of the passenger’s seat. Moving the lumbar control lever fore and aft increases or decreases the lumbar support. 8 - way driver’s power seat the driver’s...

  • Page 103

    4 - way passenger’s power seat — if equipped the front passenger’s power seat switches are located on the outboard side of the passenger seat lower side trim. The bottom switch controls forward/rearward adjust- ment. The top switch controls the seatback recline adjust- ment. Note: the 4 - way seat d...

  • Page 104

    Center of the instrument panel. After turning on the ignition, you can choose from high, off, or low heat settings. Amber leds in the top portion of each switch indicate the level of heat in use. Two leds are illumi- nated for high, one for low, and none for off. Pressing the switch once will select...

  • Page 105

    Warning! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if...

  • Page 106

    Note: do not fold the rear seat down with the center seat belt buckled. 2. Fold the rear seat completely forward. Note: the automatic folding rear head restraints will lower as the seat is folded down. To raise rear seat raise the rear seatback and lock it into place. If interfer- ence from the carg...

  • Page 107

    Storage — rear seat armrest (if equipped) the rear seat may be equipped with a center storage armrest. Press the latch and lift the top of the armrest to access the storage bin. Driver memory seat — if equipped once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to rec...

  • Page 108

    Keyless entry transmitters can also be programmed to recall the same positions when the “unlock” button is pressed. Your vehicle may have been delivered with two remote keyless entry transmitters. One or both transmitters can be linked to either memory position. The memory system can accommodate up ...

  • Page 109

    4. Adjust the brake and accelerator pedals to the desired positions. 5. Turn on the radio and set the radio station presets (up to 10 am and 10 fm stations can be set). 6. Turn the ignition switch to the off position and remove the key. 7. Press and release the set (s) button located on the driver’s...

  • Page 110

    To recall the memory settings for driver one, press memory button number 1 on the driver’s door or the “unlock” button on the remote keyless entry transmit- ter linked to memory position 1. To recall the memory setting for driver two, press memory button number 2 on the driver’s door or the “unlock”...

  • Page 111

    Note: once programmed, all transmitters linked to memory can be easily enabled or disabled at one time. Refer to remote linked to memory under ⬙ electronic vehicle information center (evic) — customer pro- grammable features ⬙ in section 4 for more information. Easy entry/exit seat this feature prov...

  • Page 112

    Each stored memory setting will have an associated easy entry and easy exit position. Note: the easy entry easy exit feature is not enabled when the vehicle is delivered from the factory. The easy entry easy exit feature is enabled (or later disabled) through the programmable features in the electro...

  • Page 113

    Then, reach under the hood, move safety latch to the left, and lift the hood. To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. Warning! If the hood is not fully latched, it could fly up when the vehic...

  • Page 114

    Lights multi-function control lever the multi-function control lever controls the operation of the headlights, turn signals, headlight beam selection, instrument panel light dimming, passing light, interior courtesy/dome lights, and optional fog lights. Battery saver feature—exterior/interior lights...

  • Page 115

    Headlights and parking lights turn the end of the multi-function control lever to the first detent for parking light operation. Turn to the second detent for headlight operation. Turn to the third detent for “auto” headlight operation (if equipped). Automatic headlight system — if equipped turn the ...

  • Page 116

    If your vehicle is equipped with a “rain sensitive wiper system,” and it is activated, the headlights will automati- cally turn on after the wipers complete five wipe cycles within approximately 1 minute, and they will turn off approximately four minutes after the wipers completely stop. Refer to “w...

  • Page 117

    To deactivate 1. Pull back on the muti-function control lever to manu- ally deactivate the system (normal operation of high beams). 2. Pull back on the multi-function control lever once again to re-activate the system. Note: broken, muddy, or obstructed headlights and taillights of vehicles in the f...

  • Page 118

    Until the ignition switch is turned off or the parking brake is engaged. The headlight switch must be used for normal night time driving. Lights-on reminder if the headlights or parking lights are on after the ignition is turned off, a chime will sound when the driver’s door is opened. Fog lights — ...

  • Page 119

    High beam switch pull the multi-function control lever towards you to switch the headlights to “high” beam. The “high beam indicator light” on the instrument cluster will illumi- nate. Pull the multi-function control lever a second time to switch the headlights to “low” beam. Passing light you can s...

  • Page 120

    Front map/reading lights these lights are mounted in the overhead console. Each light can be turned on by pressing the recessed area of the lens. To turn these lights off, press the recessed area of the lens a second time. There are also reading lights located above the rear doors. Each light can be...

  • Page 121

    Windshield wipers and washers the front and rear wipers and washers are operated by a switch in the right side control lever. Turn the end of the control lever to select “lo,” “hi,” or one of the five speed sensitive intermittent windshield wiper speeds. Refer to “speed sensitive intermittent wiper ...

  • Page 122

    To use the washer, pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will operate for several seconds after the lever is released, and then resume the intermit- tent interval previously selected. If the lever is pulled while in the ...

  • Page 123

    Rain sensing wipers—if equipped this feature senses moisture on the windshield and automatically activates the wipers for the driver. The feature is especially useful for road splash or overspray from the windshield washers of the vehicle ahead. Rotate the end of the multi-function lever to one of f...

  • Page 124

    • a customer programmable feature in the electronic vehicle information center (evic) allows the rain sense feature to be turned off. Refer to “electronic vehicle information center (evic)” in section 4 of this manual. The rain sensing system has protection features for the wiper blades and arms, an...

  • Page 125

    Tilt steering column to tilt the column, push down on the lever below the turn signal control and move the wheel up or down, as desired. Pull the lever back towards you and firmly push the lever until it is above the lower surface of the shroud to lock the column in place. Warning! Tilting the steer...

  • Page 126

    Adjustable pedals — if equipped this feature allows both the brake and accelerator pedals to move toward the driver to provide improved position with the steering wheel. The adjustable pedal system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. The ...

  • Page 127

    Press the left side of the button to move the pedals rearward (toward the driver). Press the right side of the button to move the pedals forward (away from the driver). • the pedals can be adjusted with the ignition off. • the pedals can be adjusted while driving. • the pedals cannot be adjusted whe...

  • Page 128

    Electronic speed control when engaged, this device takes over accelerator opera- tions at speeds greater than 25 mph (40 km/h). The controls are mounted on the steering wheel and consist of on·off, set, res·accel, cancel, and decel con- trols. To activate press the on·off button to turn the system o...

  • Page 129

    To resume speed to resume a previously set speed, press and release the res·accel button. Resume can be used at any speed above 25 mph (40 km/h). To vary the speed setting when the speed control is on, speed can be increased by pressing and holding the res·accel button. When the button is released, ...

  • Page 130

    Driving up or down hills when going up or down hills, it is possible for your vehicle to lose or gain speed, even though the speed control is engaged. The automatic transmission may also downshift to a lower gear, to maintain speed going up or down hills. If going down a hill steep enough to cause t...

  • Page 131

    Electronic brake control system your vehicle is equipped with an advanced electronic brake control system that includes abs (anti-lock brake system), tcs (traction control system), bas (brake assist system), erm (electronic roll mitigation), and esp (electronic stability program). All five systems w...

  • Page 132

    Tcs (traction control system) this system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the tcs system functions si...

  • Page 133

    Warning! Bas (brake assist system) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. Bas cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfa...

  • Page 134

    Warning! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur. Erm cannot prevent all wheel lift or roll overs, especially those that involve leaving the roadway or striking objects or other vehicles. Only a safe,...

  • Page 135

    Light ⬙ also flashes when tcs is active. If the ⬙ esp/tcs indicator light ⬙ begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. Warning! Esp (electronic stability program)...

  • Page 136

    Turn esp on again, momentarily depress the ⬙ esp control switch. ⬙ this will restore the normal “esp on” mode of operation. Note: to improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand, or gravel, it may be desirable to switch to the “esp partial off” mod...

  • Page 137

    After several ignition cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. Note: • ⬙ the ⬙ esp/tcs indicator light ⬙ and the ⬙ esp/bas warning lamp ⬙ come on momenta...

  • Page 138

    Rear park assist sensors the four rear park assist sensors, located in the rear fascia, monitor the area behind the vehicle that is within the sensors’ field of view. The monitored area seems oval in shape. The sensors can detect obstacles from approximately 11.8 inches (30 cm) up to 59 inches (150 ...

  • Page 139

    When the ignition is changed to the run/on position, the warning display will turn on all of its leds for about 1 second. Each side of the warning display has 6 yellow and 2 red leds. The vehicle is close to the obstacle when the red led is on. When the obstacle is detected at a distance of about 59...

  • Page 140

    Enable/disable the rear park assist system the rear park assist system can be enabled and disabled with a switch located in the switch bank of the instru- ment panel. When the switch is pressed to disable the system, the instrument cluster will display the ⬙ park assist dis- abled ⬙ message. Refer t...

  • Page 141

    Service the rear park assist system when the rear park assist system is defective, the instrument cluster will actuate a single chime, once per ignition cycle, and it will display the ⬙ service park assist system ⬙ message. Refer to “electronic vehicle information center (evic)” in section 4 of this...

  • Page 142

    Warning! • drivers must be careful when backing up even when using the rear park assist system. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before back- ing up. You are responsible for safet...

  • Page 143

    Rear camera — if equipped vehicles with a navigation radio may be equipped with a rear view camera (located on the rear liftgate) that allows you to see an on-screen image (on the navigation radio screen) of the rear of your vehicle whenever the vehicle is put into r (reverse). Warning! Drivers must...

  • Page 144

    Turning the rear camera off 1. To turn the rear camera off, select “rear camera” at the systems settings screen and press enter. Refer to your “navigation user’s manual” for detailed operating instructions. 2. Select “off” at the “rear camera” screen. Highlight “done” and press enter. The rear camer...

  • Page 145

    Courtesy/reading lights at the forward end of the console are two courtesy/ reading lights. Press the lens to turn these lights on. Press a second time to turn the lights off. The lights also turn on when a front door or rear door is opened. The lights will also turn on when the unlock button on the...

  • Page 146

    Warning! A moving garage door can cause injury to people and pets in the path of the door. People or pets could be seriously or fatally injured. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety stan- dards. This includes most gar...

  • Page 147

    Programming homelink note: when programming a garage door opener, it is advised to park outside the garage. It is also recom- mended that a new battery be placed in the hand-held transmitter of the device being programmed to homelink for quicker training and accurate transmis- sion of the radio-freq...

  • Page 148

    1. Press and hold the two outer homelink buttons, and release only when the evic display shows “channels cleared” (after 20 seconds). Do not hold the buttons for longer than 30 seconds and do not repeat step one to program a second and/or third hand-held transmitter to the remaining two homelink but...

  • Page 149

    5. Press and hold the just trained homelink button and observe the evic display. If the evic display shows “channel x transmit” (where x is channel 1, 2, or 3), programming is complete and your device should activate when the homelink button is pressed and released. Note: to program the remaining tw...

  • Page 150

    Note: to program the remaining two homelink but- tons, begin with ⬙ programming ⬙ step two. Do not repeat step one . For questions or comments, please contact homelink at www.Homelink.Com or 1-800-355-3515 . Canadian programming/gate programming canadian radio-frequency laws require transmitter sig-...

  • Page 151

    Erasing homelink buttons to erase programming from the three buttons (individual buttons cannot be erased but can be ⬙ reprogrammed ⬙ - note below), follow the step noted: • press and hold the two outer homelink buttons and release only when the evic display shows “chan- nels cleared” (after 20 seco...

  • Page 152

    • this device must accept any interference that may be received including interference that may cause undes- ired operation. Note: changes or modifications not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. Homelink 威 is a trade...

  • Page 153

    Warning! • never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • in an accident, there is a g...

  • Page 154

    Sunroof will automatically retract. Remove the obstruc- tion if this occurs. Next, press the switch forward and release to express close. Pinch protect override if a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs. T...

  • Page 155

    Sunroof maintenance use only a non-abrasive cleaner and a soft cloth to clean the glass panel. Ignition off operation the power sunroof switches remain active for 10 minutes after the ignition switch has been turned off. Opening either front door will cancel this feature. Sunroof fully closed press ...

  • Page 156

    The rear power outlet (if equipped) is located in the left rear cargo area. The power outlets are a direct feed from the battery so they receive power whether the ignition is in the on or off position. All accessories connected to this outlet should be re- moved or turned off when the vehicle is not...

  • Page 157

    Caution! Electrical outlet use with engine off • many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.E., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or ...

  • Page 158

    Note: the cup holder insert is removable, from the console, for cleaning. It can be reinstalled with the larger cup depression towards the passenger seat, but the top surface will not be flush with the console surface. The rear passengers have access to two cup holders that pull out from the lower c...

  • Page 159

    Rear storage compartment the rear storage compartment is located on the driver’s side behind the second row seat. Retractable cargo area cover note: the purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. To cover...

  • Page 160

    3. The liftgate may be opened with the cargo cover in place. Warning! In an accident a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compartment. Remove ...

  • Page 161

    Cargo tie-down hooks the tie-downs located on cargo area floor should be used to safely secure loads when vehicle is moving. Warning! Cargo tie-down hooks are not safe anchors for a child seat tether strap. In a sudden stop or collision a hook could pull loose and allow the child seat to come loose....

  • Page 162

    • do not carry loads which exceed the load limits described on the label attached to the left door or left door center pillar. • always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • place as much cargo as possible in front of the rear axle. Too m...

  • Page 163

    Cargo load floor the panel in the load floor is reversible for added utility. One side is carpeted and the other side features a plastic lined tray which holds a variety of items. The cargo load floor is held by spring loaded latches. In order to use the cargo load floor, use the following procedure...

  • Page 164

    Rear window features rear window wiper/washer — if equipped a switch on the right side of the steering column controls operation of the rear wiper/washer function. Rotating the switch up to the del (delay) position or the on position will activate the wiper. Rotating the switch all the way up or dow...

  • Page 165

    If the liftgate flipper glass is open, connection to the rear window wiper is interrupted preventing activation of the rear wiper blade. When the liftgate flipper glass is closed, the rear wiper switch or the ignition switch needs to be turned off and on to restart the rear wiper. Adding washer flui...

  • Page 167: Contents

    Understanding your instrument panel contents 䡵 instrument panel and controls . . . . . . . . . . . . . 170 䡵 instrument cluster . . . . . . . . . . . . . . . . . . . . . . 171 䡵 instrument cluster description . . . . . . . . . . . . . 172 䡵 electronic vehicle information center . . . . . . . . 179 ▫...

  • Page 168

    ▫ operation instructions - (cd mode for cd audio play) . . . . . . . . . . . 201 ▫ load/eject button (cd mode for cd audio play) . . . . . . . . . . . 202 ▫ notes on playing mp3 files . . . . . . . . . . . . . 204 ▫ operation instructions - (cd mode for mp3 audio play) . . . . . . . . . . 207 ▫ load...

  • Page 169

    ▫ reception quality . . . . . . . . . . . . . . . . . . . . . 219 䡵 remote sound system controls . . . . . . . . . . . . . 219 ▫ radio operation . . . . . . . . . . . . . . . . . . . . . . 220 ▫ cd player . . . . . . . . . . . . . . . . . . . . . . . . . . 220 䡵 cd/dvd disc maintenance . . . . . . ....

  • Page 170

    Instrument panel and controls 170 understanding your instrument panel.

  • Page 171

    Instrument cluster understanding your instrument panel 171 4.

  • Page 172

    Instrument cluster description 1. Speedometer indicates vehicle speed. 2. Brake warning light the brake warning light will come on when the ignition is first turned on, and stay on briefly as a bulb check. If the bulb does not come on during starting, have the bulb re- paired promptly. If the light ...

  • Page 173

    Engine start. If the bulb does not come on when turning the key from off to on, have the condition checked promptly. Certain conditions such as a loose or missing gas cap, poor fuel quality, etc. May illuminate the light after engine start. The vehicle should be serviced if the light stays on throug...

  • Page 174

    8. Tachometer the red segments indicate the maximum permissible engine revolutions-per-minute (r.P.M. X 1000) for each gear range. Before reaching the red area, ease up on the accelerator. 9. Security alarm system indicator light — if equipped this light will flash rapidly for approximately 15 secon...

  • Page 175

    12. Tire pressure monitoring telltale light each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (if your vehicle has tires of a differ...

  • Page 176

    Caution! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads (h), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “h”, and you hear contin...

  • Page 177

    16. Seat belt reminder light when the ignition switch is first turned on, this light will turn on for 5 to 8 seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver or front passenger seat belt re...

  • Page 178

    21. Electronic throttle control (etc) warning light this light informs you of a problem with the electronic throttle control system. If a problem is detected the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the gear selector is pl...

  • Page 179

    Electronic vehicle information center the electronic vehicle information center (evic) located in the instrument cluster, when the appropriate condi- tions exist, will display the following messages and symbols. Some of the messages are accompanied by a chime. • turn signal on • perform service • ke...

  • Page 180

    • liftgate/doors open (with graphic) • liftglass open (with graphic) • hood open (with graphic) • hood/door open (with graphic) • hood/doors open (with graphic) • liftgate/hood open (with graphic) • hood/glass/door open (with graphic) • hood/glass/doors open (with graphic) • hood/gate/door open (wit...

  • Page 181

    • memory #2 positions set • memory system disabled — seatbelt fas- tened (with graphic) • memory system disabled — vehicle not in park • driver 1 memory • driver 2 memory • pedal adjust disabled — cruise control set • pedal adjust disabled — shifter in re- verse • service tire press system • left fr...

  • Page 182

    Language? When in this display you may select one of three lan- guages for all display nomenclature, including the trip computer functions. Press the step button while in this display selects english, espanol, or francais. As you continue the displayed information will be shown in the selected langu...

  • Page 183

    Remote unlock driver’s door 1st? When this feature is selected only the driver’s door will unlock on the first press of the remote keyless entry unlock button and require a second press to unlock the remaining locked doors and liftgate. When remote unlock all doors is selected all of the doors and t...

  • Page 184

    Headlamp delay when this feature is selected the driver can choose, when exiting the vehicle, to have the headlamps remain on for 30, 60, or 90 seconds, or not remain on. Pressing the step button when in this display will select 30, 60, 90, or off. Illuminated approach? When this feature is selected...

  • Page 185

    Front wipers rain sense? (available with rain sensing wipers only) pressing the step button when in this display will select “manual” or “rain sense.” service interval when this feature is selected a service interval between 2,000 (3 200 km) and 6,000 miles (10 000 km) in 500 mile (800 km) increment...

  • Page 186

    Compass/temperature/trip computer this display provides the outside temperature, one of the eight compass headings to indicate the direction the vehicle is facing, and vehicle trip information. The com- pass and temperature display is the normal display. When the c/t button is pressed the compass/ t...

  • Page 187

    Warning! Even if the display still reads a few degrees above 32°f ( 0°c), the road surface may be icy, particularly in woods or on bridges. Drive carefully under such conditions to prevent an accident and possible per- sonal injury or property damage. Compass/temperature display understanding your i...

  • Page 188

    Trip computer this feature, located in the instrument cluster, displays the following information when the display is in the “compass/temperature” mode and the step button is pressed: step button press the step button to cycle through all of the compass/mini-trip computer displays. Step button 188 u...

  • Page 189

    Reset button press the reset button to reset the display you are in. Press and hold the reset button (for 2 seconds) to reset all of the displays. Average fuel economy shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “reset” or show dashes fo...

  • Page 190

    Elapsed time shows the accumulated ignition on time since the last reset. Engine oil pressure shows the current engine oil pressure. The scale will read from 0–100 psi (0–689 kpa). Engine oil temperature shows the current engine oil temperature. The scale will read from 140° – 300°f (60° – 149°c). T...

  • Page 191

    Note: tires heat up during normal driving conditions. Heat will cause the tire pressure to increase from 2 to 6 psi (14 to 41 kpa) during normal driving conditions. Refer to “tire inflation pressures” in section 5 for additional information. Miles to service shows the distance remaining to require s...

  • Page 192

    To put into a calibration mode start the engine, and leave the transmission in the p (park) position. Set the display to “compass/ temperature.” press and hold the c/t button for ap- proximately 5 seconds to change the display to compass variance mode; holding the button for an additional 5 seconds ...

  • Page 193

    Compass variance is the difference between magnetic north and geographic north. In some areas of the country, the difference between magnetic and geographic north is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set according to the compass va...

  • Page 194

    To set the variance: turn the ignition on and set the display to “compass/temperature.” press the c/t but- ton approximately 5 seconds. The last variance zone number will be displayed. Press and hold the step button for 1 second to select the new variance zone and press the reset button to resume no...

  • Page 195

    Fm reception because fm transmission is based on frequency varia- tions, interference that consists of amplitude variations can be filtered out, leaving the reception relatively clear, which is the major feature of fm radio. Note: the radio, steering wheel radio controls (if equipped), and 6 disc cd...

  • Page 196

    Power switch/volume control (rotary) press the on/vol control to turn the radio on. Press the on/vol a second time to turn off the radio. Electronic volume control the electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the volume control to the r...

  • Page 197

    Scan button (radio mode) pressing the scan button causes the tuner to search for the next listenable station, in either am, fm or satellite (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. To stop the search, press scan a second time. Msg or ...

  • Page 198

    Am/fm button (radio mode) press the button to select am or fm modes. Setting the tone, balance, and fade press the rotary tune control and bass will display. Turn the tune control to the right or left to increase or decrease the bass tones. Press the rotary tune control a second time and mid will di...

  • Page 199

    Toggle the pty button to select the following format types: program type 16 digit-character dis- play no program type or un- defined none adult hits adult_hits alert alert alert alert classical classical classic rock classic_rock college college country country emergency test emergency test foreign ...

  • Page 200

    By pressing the seek button when the pty icon is displayed, the radio will be tuned to the next frequency station with the same selected pty name. The pty function only operates when in the fm mode. If a preset button is activated while in the pty (program type) mode, the pty mode will be exited and...

  • Page 201

    Operation instructions - (cd mode for cd audio play) note: the ignition switch must be in the on or acc position to operate the radio. Note: note: this radio is capable of playing compact discs (cd), recordable compact discs (cd-r), rewritable compact discs (cd-rw) compact discs with mp3 tracks and ...

  • Page 202

    Seek button (cd mode for cd audio play) press the right side of the seek button for the next selection on the cd. Press the left side of the button to return to the beginning of the current selection, or return to the beginning of the previous selection if the cd is within the first 10 seconds of th...

  • Page 203

    Radio display will show ⬙ ejecting disc ⬙ when the disc is being ejected and prompt the user to remove the disc. Press and hold the load/ ejt button for 5 seconds and all cds will be ejected from the radio. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded. If...

  • Page 204

    Rnd/pty button (random play button) (cd mode for cd audio play) press this button while the cd is playing to activate random play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the seek button to move to the next randomly select...

  • Page 205

    • maximum number of files: 255 • maximum number of folders: 100 • maximum number of characters in file/folder names: • level 1: 12 (including a separator ⬙ . ⬙ and a 3-character extension) • level 2: 31 (including a separator ⬙ . ⬙ and a 3-character extension) multisession disc formats are supported...

  • Page 206

    Mpeg specifi- cation sampling fre- quency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 id3 tag information for artist, song title and ...

  • Page 207

    Operation instructions - (cd mode for mp3 audio play) seek button (cd mode for mp3 play) pressing the right side of the seek button plays the next mp3 file. Pressing the left side of the seek button plays the beginning of the mp3 file. Pressing the button within the first ten seconds plays the previ...

  • Page 208

    Msg or info button (cd mode for mp3 play) press and msg or info button while playing mp3 disc. The radio scrolls through the following tag information: song title, artist, file name, and folder name (if avail- able). Press the msg or info button once more to return to ⬙ elapsed time ⬙ priority mode....

  • Page 209

    Operating instructions - hands free phone (if equipped) refer to hands free phone in section 3 of the owner’s manual. Operating instructions - satellite radio mode (if equipped) refer to the satellite radio section of the owner’s manual. Operating instructions - video entertainment system (ves 威 ) (...

  • Page 210

    Satellite navigation radio with cd player with mp3 capability (rec) - combines a global-positioning system-based navigation system with an integrated color screen to provide maps, turn identification, selection menus and instructions for selecting a variety of destina- tions and routes, am/fm stereo...

  • Page 211

    1. At the main menu screen, highlight “clock setup” and press enter or press and hold for 3 seconds the time button on the unit’s faceplate. The clock setup screen appears. 2. To show the gps clock, select “displayed clock: gps clock” and press enter. 3. To adjust the time zone, select “time zone” a...

  • Page 212

    1. At the clock setup screen highlight “displayed clock: user defined clock”. 2. To increase the clock by hours, make sure “hr +” is highlighted and press enter. Press enter again to increase the clock by another hour. You will see on the “user defined time” display the number of hours you have incr...

  • Page 213

    Audio clock display select this option to change the size of the clock on the audio screens. 1. When you are at an audio screen, quickly press the time button on the navigation faceplate. 2. In this example the large clock appears on the screen. 3. To switch the clock to the small clock, quickly pre...

  • Page 214

    Video entertainment system (sales code xrv) — if equipped the optional ves™ (video entertainment system) con- sists of a dvd player and lcd (liquid crystal display) screen, a battery-powered remote control, and two head- sets. The dvd player is mounted in the rear of the center console storage bin, ...

  • Page 215

    The lcd screen is located on the headliner behind the front seats. Lowering the dvd screen remote control location understanding your instrument panel 215 4.

  • Page 216

    Satellite radio — if equipped satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is sirius™ satel- lite radio. This service offers over 100 channels of music, sports, news, entertainment, and p...

  • Page 217

    Selecting satellite mode in raq radios press the mode button repeatedly until the word ⬙ sirius ⬙ appears in the display. These radios will also display the following: • after 3 seconds, the current channel name and channel number will be displayed for 5 seconds. • the current program type and chann...

  • Page 218

    Storing and selecting pre-set channels in addition to the 10 am and 10 fm pre-set stations, you may also commit 10 satellite stations to push button memory. These satellite channel pre-set stations will not erase any am or fm pre-set memory stations. Follow the memory pre-set procedures that apply t...

  • Page 219

    Reception quality satellite reception may be interrupted due to one of the following reasons. • the vehicle is parked in an underground parking structure or under a physical obstacle. • dense tree coverage may interrupt reception. • driving under wide bridges or along tall buildings can cause interm...

  • Page 220

    Pressing the center button will make the radio switch between the various modes available (am/fm/tape/ cd, etc.). The left hand control is a rocker type switch with a push-button in the center. The function of the left hand control is different depending on which mode you are in. The following descr...

  • Page 221

    Cd/dvd disc maintenance to keep the cd/dvd discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper, paper cd labels, or tape ...

  • Page 222

    Climate controls automatic temperature control the infrared dual-zone climate control system auto- matically maintains the interior comfort level desired by the driver and passenger. This is accomplished by a dual sun-sensor in the top of the instrument panel, and an infrared sensor located in the f...

  • Page 223

    Lo auto position should be used for front seat occu- pants only. The hi auto position should be used when more air flow is desired, or when rear seat occupants are present. Dial in the comfort setting you would like the system to maintain by rotating the driver’s or passenger’s control knob. Once th...

  • Page 224

    Debris due to the climate control sensor’s location. Mud on the windshield may also cause poor operation of this system. • to provide you with maximum comfort in the auto- matic mode, during cold start-ups the blower fan will remain off until the engine warms up. However, the fan will engage immedia...

  • Page 225

    Understanding your instrument panel 225 4.

  • Page 226

    Note: regardless of the type of operation, when a temperature knob is set to the full clockwise or full counterclockwise position, the system will deliver full hot or full cold air out of the ducts, respectively. The operator can override the auto mode setting and select the direction of the air by ...

  • Page 227

    Air flows through the registers in the back of the center console, and under the front seats to the rear seat passengers. These registers can be closed to block airflow. The center console outlets deliver conditioned air while the floor outlets deliver heated air. • panel air flows through the outle...

  • Page 228

    Operating tips window fogging windows will fog on the inside when the humidity inside the vehicle is high. This often occurs in mild or cool temperatures when it’s rainy or humid. In most cases turning on the air-conditioning (pressing the snowflake button) will clear the fog. Adjust the temperature...

  • Page 229

    Your air conditioning system is also equipped with an automatic recirculation system. When the system senses a heavy load or high heat conditions, it may use partial recirculation a/c mode to provide additional comfort. Winter operation when operating the system during the winter months, make sure t...

  • Page 231: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . . 234 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . . 234 ▫ extreme cold weather (below –20°f (–29°c) . . 235 ▫ if engine fails to start . . . . . . . . . . . . . . . . . 235 ▫ after starting ...

  • Page 232

    ▫ tire identification number (tin) . . . . . . . . . . 253 ▫ tire loading and tire pressure . . . . . . . . . . . 254 䡵 tires — general information . . . . . . . . . . . . . . . 258 ▫ run flat tires . . . . . . . . . . . . . . . . . . . . . . . . 258 ▫ tire pressure . . . . . . . . . . . . . . . . ....

  • Page 233

    䡵 trailer towing . . . . . . . . . . . . . . . . . . . . . . . . . 277 ▫ common towing definitions . . . . . . . . . . . . . 277 ▫ trailer hitch classification . . . . . . . . . . . . . . . 281 ▫ trailer towing weights (maximum trailer weight ratings) . . . . . . . . . 282 ▫ trailer and tongue weigh...

  • Page 234

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Caution! Long periods of engine idling, especially at high engine speeds can cause excessive exhaust tempera- tures which can damage your vehicle. Do not leave your...

  • Page 235

    Extreme cold weather (below –20°f (–29°c) to insure reliable starting at these temperatures, use of an externally powered electric engine block heater (available from your authorized dealer) is recommended. If engine fails to start if the engine fails to start after you have followed the “normal sta...

  • Page 236

    Warning! Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. Warning! Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automat...

  • Page 237

    Released. If this occurs, continue cranking with the accel- erator pedal pushed all the way to the floor. Release the accelerator pedal and the key once the engine is running smoothly. If the engine shows no sign of starting after two 15– second periods of cranking with the accelerator pedal held to...

  • Page 238

    Automatic transmission caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into p (park) only after the vehicle has come to a complete stop. • shift into or out of r (reverse) only after the vehicle has come to a complete stop and the engine is at i...

  • Page 239

    5–speed automatic transmission the electronically controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle, may be somewhat abrupt. This is a normal condition, and precision shifts will develop with...

  • Page 240

    P (park) supplements the parking brake by locking the transmis- sion. The engine can be started in this range. Never use p (park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Warning! Unintended movement of a vehicle could injure those in and near t...

  • Page 241

    Rocking the vehicle if the vehicle becomes stuck in snow, sand, or mud, it can often be moved by a rocking motion. Move the gear selector rhythmically between d (drive) and r (reverse), while applying slight pressure to the accelerator. Note: the electronic stability program (esp) and traction contr...

  • Page 242

    Can also provide the driver with more control during passing, city driving, mountain driving, trailer towing, and many other situations. Autostick operation by placing the shift lever in the d (drive) position the lever can be moved from side to side. This allows the driver to engage the autostick m...

  • Page 243

    (evic) portion of your instrument cluster. This message appears in order to alert the driver that the engine speed is approaching it’s maximum value and a upshift to the next gear is required. In the event that the driver does not upshift, the engine control system will limit the engine speed to pro...

  • Page 244

    Parking brake to set the parking brake, pull the lever up as firmly as possible. When the parking brake is applied with the ignition on, the “brake warning light” in the instru- ment cluster will light. To release the parking brake, pull up slightly, press the center button, then lower the lever com...

  • Page 245

    Warning! • always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury. Also, be certain to leave the transmis- sion in p (park). Failure to do so may allow the vehicle to roll and cause damage or injury. • leaving children in a vehicle unattended is d...

  • Page 246

    Warning! Significant over or under inflation of tires can lead to loss of braking effectiveness. The anti-lock brake system conducts a low-speed self- test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring you may feel slight pedal movement. The movem...

  • Page 247

    Warning! • the anti-lock brake system (abs) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • the abs cannot prevent accidents, ...

  • Page 248

    • do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping dis- tances, or brake damage. • when descending mountains or hills, repeated brak- ing can cause brake fade with loss of braking control. Avoid rep...

  • Page 249

    Note: increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that there is a problem with the power steering system. Upon initial start-up in cold weather, the power steering pump may make noise for a short amount of time. This is due to the cold, th...

  • Page 250

    Tire safety information tire markings note: • p (passenger)-metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designation. Ex- ample: p215/65r15 95h. • european metric tire sizing is based on european design standards...

  • Page 251

    Tire sizing chart example: size designation: p = passenger car tire size based on u.S. Design standards ⴖ ....Blank.... ⴖ = passenger car tire based on european design standards lt = light truck tire based on u.S. Design standards t = temporary spare tire 31 = overall diameter in inches (in) 215 = s...

  • Page 252

    Example: service description: 95 = load index —a numerical code associated with the maximum load a tire can carry. H = speed symbol —a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —the maximum speed corresp...

  • Page 253

    Tire identification number (tin) the tin may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full tin including date code located on the white sidewall side of the tire. Look for the tin on the outboard side of black...

  • Page 254

    Tire loading and tire pressure tire placard location note: the proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “b” pillar. Tire and loading information placard this placard tells you important information about the: 1) number of people that ...

  • Page 255

    Loading the vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “tire and loading informat...

  • Page 256

    Passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (since 5 x 150 = 750, and 1400 – 750 = 650 lbs.) 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load c...

  • Page 257

    Starting and operating 257 5.

  • Page 258

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information run flat tires this vehicle is equipped wit...

  • Page 259

    1. Safety— warning! Improperly inflated tires are dangerous and can cause accidents. • under inflation increases tire flexing and can result in tire failure. • over inflation reduces a tire’s ability to cushion shock. Objects on the road and chuck holes can cause damage that results in tire failure....

  • Page 260

    Tire inflation pressures the proper cold tire inflation pressure is listed on either the face of the driver’s door, or the driver’s side “b” pillar. The pressure should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality po...

  • Page 261

    Check tire pressures more often if subject to a wide range of outdoor temperatures, as tire pressures vary with temperature changes. Tire pressures change by approximately 1 psi (7 kpa) per 12° f (7° c) of air temperature change. Keep this in mind when checking tire pressure inside a garage especial...

  • Page 262

    Warning! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. You could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h). Radial-ply tires warning! Co...

  • Page 263

    Tire spinning when stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 35 mph (55 km/h). Warning! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not sp...

  • Page 264

    Becomes 1/16 inch (2 mm). When the indicators appear in 2 or more adjacent grooves, the tire should be replaced. Many states have laws requiring tire replacement at this point. Life of tire the service life of a tire is dependent upon varying factors including but not limited to: • driving style • t...

  • Page 265

    Replacement tires the tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manu- facturer strongly recommends that you use tires equiva- lent to the originals in size, quality and performance wh...

  • Page 266

    Caution! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings. Alignment and balance poor suspension alignment may result in: • fast tire wear. • uneven tire wear, such as feathering and one-sided wear. • vehicle pull to right or left. Tires...

  • Page 267

    Note: it is particularly important, for you to check the tire pressure in all of your tires regularly and to maintain the proper pressure. The “tire pressure monitoring telltale light” will illuminate in the instrument cluster, and an au- dible chime will be activated when one or more tire pressures...

  • Page 268

    The following ⬙ warnings ⬙ will cause a text message to be displayed, an audible chime to sound, and the “tire pressure monitoring telltale light” to illuminate. The audible chime will occur once every ignition cycle for each ⬙ warning ⬙ detected. The “tire pressure monitoring telltale light” will i...

  • Page 269

    Caution! The tpms has been optimized for the original equipment tires and wheels. Tpms pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or st...

  • Page 270

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • this device may not cause harmful interference. • this device must accept any interference received, including interference that may cause undesi...

  • Page 271

    Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifica- tions (the world wide fuel charter, wwfc) to define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle. The manufacturer recommends the ...

  • Page 272

    Manufacturer. While mtbe is an oxygenate made from methanol, it does not have the negative effects of metha- nol. Mmt in gasoline mmt is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber. Gasolines blended with mmt offer no performance advant...

  • Page 273

    Fuel system cautions caution! Follow these guidelines to maintain your vehicle’s performance: • the use of leaded gas is prohibited by federal law. Using leaded gasoline can impair engine performance, or damage the emission control system. • an out-of-tune engine, or certain fuel or ignition malfunc...

  • Page 274

    Garage, and never sit in a parked vehicle with the engine running for an extended period. If the vehicle is stopped in an open area with the engine running for more than a short period, adjust the ventilation system to force fresh, outside air into the vehicle. • guard against carbon monoxide with p...

  • Page 275

    Caution! Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting after- market cap can cause the mil (malfunction indica- tor light) to illuminate, due to fuel ...

  • Page 276

    Note: tighten the gas cap about 1/4 turn until you hear one click. This is an indication that cap is properly tightened. If the gas cap is not tighten properly, the malfunction indicator light will come on. Be sure the gas cap is tightened every time the vehicle is refueled. Warning! A fire may resu...

  • Page 277

    Warning! • never add fuel when the engine is running. • never have any smoking materials lit in or near the vehicle when the fuel cap is removed or the tank filled. Trailer towing in this section you will find safety tips and information on limits to the type of towing you can reasonably do with you...

  • Page 278

    Gross combination weight rating (gcwr) the gross combination weight rating (gcwr) is the total permissible weight of your vehicle and trailer when weighed in combination. (note that gcwr ratings in- clude a 150 lbs (68 kg) allowance for the presence of a driver). Gross axle weight rating (gawr) the ...

  • Page 279

    Hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized trailers. Weight-distributing hitch a weight-distributing system works by applying lever- age through spring (load) bars. They are typically used for heavier loads, to distribute trailer tongue ...

  • Page 280

    Weight distributing hitch system improper adjustment of weight distributing system 280 starting and operating.

  • Page 281

    Trailer hitch classification your vehicle may be factory equipped for safe towing of trailers weighing over 3,500 lbs (1 587 kg) with the optional trailer tow prep package. See your dealer for package content. The following chart provides the industry standard for the maximum trailer weight a given ...

  • Page 282

    Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ transmission gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Tongue wt. (see note 1) 6.1l automatic 8,800...

  • Page 283

    Never exceed the maximum tongue weight stamped on your trailer hitch. Consider the following items when computing the weight on the front/rear axles of the vehicle: • the tongue weight of the trailer. • the weight of any other type of cargo or equipment put in or on your vehicle. • the weight of the...

  • Page 284

    Towing requirements to promote proper break-in of your new vehicle driv- etrain components the following guidelines are recom- mended: caution! • avoid towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle. • during the first 500 miles (805 km) of t...

  • Page 285

    • safety chains must always be used between your vehicle and trailer. Always connect the chains to the hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners. • vehicles with trailers should not be parked on a grade. When parking, ap...

  • Page 286

    − when replacing tires, refer to “tires–general informa- tion” for proper tire replacement procedures. Replac- ing tires with a higher load carrying capacity will not increase the vehicle’s gvwr and gawr limits. Towing requirements — trailer brakes − do not interconnect the hydraulic brake system or...

  • Page 287

    Warning! Do not connect trailer brakes to your vehicle’s hy- draulic brake lines. It can overload your brake sys- tem and cause it to fail. You might not have brakes when you need them and could have an accident. Towing any trailer will increase your stopping dis- tance. When towing you should allow...

  • Page 288

    Towing tips before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Towing tips — automatic transmission the “d” range can be selected when towing. However, if frequent shifting occurs while in this range, the “3” range should be selected....

  • Page 289

    Towing tips — electronic speed control (if equipped) − don’t use in hilly terrain or with heavy loads. − when using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − use speed control in flat terrain and with light l...

  • Page 291: Contents

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . . . . . . . . 292 䡵 if your engine overheats . . . . . . . . . . . . . . . . . 293 䡵 jump starting . . . . . . . . . . . . . . . . . . . . . . . . . 293 6.

  • Page 292

    Hazard warning flashers your vehicle’s hazard warning flasher is an emergency warning system. When you activate it, all front and rear directional signals will flash intermittently. Use it when your vehicle is disabled on or near the road. It warns other drivers to steer clear of you and your vehicl...

  • Page 293

    If your engine overheats in any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- tion. • on the highways — slow down. • in city traffic — while stopped, put transmission in n (neutral), but do not increase engine idle speed. Note: there are step...

  • Page 294

    Warning! Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or clothing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other. If acid splashes in eyes or on skin, flush contaminated area immedi- ately with large quantities o...

  • Page 295

    1. Remove all metal jewelry such as watch bands or bracelets which might make an unintended electrical contact. 2. Park the booster vehicle within cable reach but with- out letting the vehicles touch. Set the parking brake on both vehicles, place the transmission in p (park), and turn the ignition o...

  • Page 296

    Warning! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle. Warning! • you should not try t...

  • Page 297: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment – 6.1l . . . . . . . . . . . . . . . 300 䡵 onboard diagnostic system — obd ii . . . . . . . . 301 ▫ loose fuel filler cap message . . . . . . . . . . . . 302 䡵 emissions inspection and maintenance programs . . . . . . . . . . . . . . . . . . . ....

  • Page 298

    ▫ power steering fluid check . . . . . . . . . . . . . . 314 ▫ body lubrication . . . . . . . . . . . . . . . . . . . . . 316 ▫ windshield wiper blades . . . . . . . . . . . . . . . . 316 ▫ windshield washers — front and rear . . . . . 316 ▫ exhaust system . . . . . . . . . . . . . . . . . . . . . ....

  • Page 299

    ▫ front fog light . . . . . . . . . . . . . . . . . . . . . . 343 ▫ rear tail, stop, turn signal, and back-up lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 ▫ center high mounted stop light (chmsl) . . . 345 䡵 fluid capacities . . . . . . . . . . . . . . . . . . . . . . . . 346...

  • Page 300

    Engine compartment – 6.1l 300 maintaining your vehicle.

  • Page 301

    Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 302

    Loose fuel filler cap message after fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is loose, improperly installed, or damaged. A “check gascap” message will be displayed in the evic (refer to section 4 of this manual). Tighten the gas cap until a ⬙ clicking ⬙ sound...

  • Page 303

    Is functioning and is not on when the engine is running, and that the obd (on board diagnostic) system is ready for testing. Normally, the obd system will be ready. The obd system may not be ready if your vehicle was recently serviced, if you recently had a dead battery, or a battery replacement. If...

  • Page 304

    You may need to do nothing more than drive your vehicle as you normally would in order for your obd system to update. A recheck with the above test routine may then indicate that the system is now ready. Regardless of whether your vehicle’s obd system is ready or not ready, if the mil symbol is illu...

  • Page 305

    Warning! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. Maintenance procedures the pages ...

  • Page 306

    Note: fill engine oil one quart at a time. Caution! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Caution! Operating the engine with the oil levels below the safe zone, or operating with oil levels that exceed the top of the safe zone may...

  • Page 307

    • stop and go driving. • extensive engine idling. • driving in dusty conditions. • short trips of less than 10 miles (16 km). • more than 50% of your driving is at sustained high speeds during hot weather, above 90°f (32°c). • trailer towing. Note: if any of these apply to you then change your engin...

  • Page 308

    Engine oil viscosity chart the proper sae viscosity grade of engine oil should be selected based on the following recommendation and be within the operating temperature shown in the engine oil viscosity chart. Materials added to engine oil the manufacturer strongly recommends against the ad- dition ...

  • Page 309

    Engine oil filter selection the manufacturer’s engines have a full-flow type oil filter. Use a filter of this type for replacement. The quality of replacement filters varies considerably. Only high quality filters should be used to assure most efficient service. Mopar engine oil filters are a high q...

  • Page 310

    Engine air cleaner filter under normal driving conditions, replace the air filter at the intervals shown on “maintenance schedule a.” if, however, you drive the vehicle frequently under dusty or severe conditions, the filter element should be inspected periodically and replaced if necessary at the i...

  • Page 311

    Caution! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly. Contin- ued operation of your veh...

  • Page 312

    To minimize the possibility of catalyst damage: • do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • do not try to start engine by pushing or towing the vehicle. • do not idle the engine with any spark plug wires disconnected or remo...

  • Page 313

    To determine the battery charge, check the battery test indicator (if equipped) on top of the battery. Refer to the illustration. Caution! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negat...

  • Page 314

    Warning! • use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Re...

  • Page 315

    Caution! Do not use automatic transmission fluid (atf) or other types of power steering fluids when servicing the power steering system of this vehicle. Damage to the power steering system can result from the use of the wrong power steering fluid. Checking the power steering fluid level at a defined...

  • Page 316

    Body lubrication locks and all body pivot points, including such items as seat tracks, doors, trunk and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against rust and wear. Prior to the appli- cation of any lubricant, the parts concerned should be wipe...

  • Page 317

    The “washer fluid low” message will be displayed. Refer to “electronic vehicle information center” in section 4 of this manual. The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the front of the engine compartment on the passenger side and should b...

  • Page 318

    Warning! Exhaust gases can injure or kill. They contain carbon monoxide (co) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing co, fol- low the preceding safety tips. Cooling system warning! • when working near the radiator cooli...

  • Page 319

    Applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh coolant. Check the front of the a/c condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the ...

  • Page 320

    Caution! Mixing of coolants other than specified hoat en- gine coolants, may result in engine damage and may decrease corrosion protection. If a non-hoat cool- ant is introduced into the cooling system in an emergency, it should be replaced with the specified coolant as soon as possible. Do not use ...

  • Page 321

    The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system. Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- cording to the temperatures occurring in the area where the vehicle is opera...

  • Page 322

    Do not store ethylene glycol based engine coolant in open containers or allow it to remain in puddles on the ground. If ingested by a child, contact a physician immediately. Clean up any ground spills immediately. Coolant level the coolant bottle provides a quick visual method for determining that t...

  • Page 323

    • if frequent coolant additions are required, or if the level in the coolant recovery bottle does not drop when the engine cools, the cooling system should be pres- sure tested for leaks. • maintain coolant concentration at 50% hoat engine coolant (minimum) and distilled water for proper corrosion p...

  • Page 324

    Inspect all hose connections such as clamps and cou- plings to make sure they are secure and no leaks are present. Components should be replaced immediately if there is any evidence of wear or damage that could cause failure. Brake system in order to assure brake system performance, all brake system...

  • Page 325

    Insure nylon tubing in these areas has not melted or collapsed. Inspect all hose connections such as clamps and cou- plings to make sure they are secure and no leaks are present. Note: often, fluid such as oil, power steering fluid, and brake fluid are used during assembly plant opera- tions to faci...

  • Page 326

    Overfilling of fluid is not recommended because it may cause leaking in the system. Add enough fluid to bring the level up to the require- ments described on the brake fluid reservoir. With disc brakes, fluid level can be expected to fall as the brake pads wear. However, low fluid level may be cause...

  • Page 327

    Caution! Do not allow petroleum base fluid to contaminate the brake fluid, all brake seal components could be damaged causing partial or complete brake failure. Fuel system hoses electronic fuel injection high pressure fuel systems are designed with hoses and quick connect fittings which have unique...

  • Page 328

    Caution! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter change...

  • Page 329

    • police, taxi, limousine, commercial type operation, or trailer towing where the vehicle is driven regularly for more than 45 minutes of continuous operation. If the transmission is disassembled for any reason, the fluid and filter should be changed. Front and rear wheel bearings front and rear whe...

  • Page 330

    Washing • wash your vehicle regularly. Always wash your ve- hicle in the shade using mopar 威 car wash or a mild car wash soap, and rinse the panels completely with clear water. • if insects, tar, or other similar deposits have accumu- lated on your vehicle, use mopar 威 super kleen bug and tar remove...

  • Page 331

    • if your vehicle is damaged due to an accident or similar cause which destroys the paint and protective coating have your vehicle repaired as soon as possible. The cost of such repairs is considered the responsibil- ity of the owner. • if you carry special cargo such as chemicals, fertilizers, de-i...

  • Page 332

    Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and mopar 威 total clean....

  • Page 333

    2. Dry with a soft tissue. Seat belt maintenance do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use mopar 威 total clean, a mild soap solution, or lukewarm water. Do no...

  • Page 334

    Cav- ity cartridge fuse mini fuse description 1 30 amp green audio amp (b+) 2 15 amp blue sunroof (b+) 3 10 amp red htd mirror (ebl) 4 20 amp yellow rr pwr out (b+) 5 spare 6 spare 7 20 amp yellow door locks (b+) 8 15 amp blue steer col lock (b+) (elv) 9 20 amp yellow pwr outlet (b+) cav- ity cartri...

  • Page 335

    Cav- ity cartridge fuse mini fuse description 14 20 amp yellow cigar ltr (r/a) 15 10 amp red tire pressure trans- ducers (r/o) 16 10 amp red steering control mod- ule (scm), diag. Con- nector, cluster (b+) 17 15 amp blue flipper glass (b+) 19 spare (r/s) 20 10 amp red sentry key remote entry module ...

  • Page 336

    Underhood fuses (power distribution center) cav- ity cartridge fuse mini fuse description 1 40 amp green hvac blower cav- ity cartridge fuse mini fuse description 2 30 amp pink power outlets 3 30 amp pink rr wiper/ign r/o 4 30 amp pink abs pump 5 spare 6 50 amp red auto shut down (asd) 7 spare 8 40 ...

  • Page 337

    Cav- ity cartridge fuse mini fuse description 11 30 amp pink cig ltr/t-tow 12 40 amp green rear window defog- ger (ebl)/htd mirror 13 40 amp green junction block (jb) power 14 spare 15 spare 16 25 amp natural integrated power module (ipm)/coils 17 spare 18 20 amp yellow eatx/ac clutch 19 20 amp yell...

  • Page 338

    Underhood fuses (integrated power module) cav- ity cartridge fuse mini fuse description 8 10 amp red lt park lamps cav- ity cartridge fuse mini fuse description 9 10 amp red trailer-tow park lamps 10 10 amp red rt park lamps 12 20 amp yellow front control module (fcm) batt #4 13 20 amp yellow front ...

  • Page 339

    Cav- ity cartridge fuse mini fuse description 18 20 amp yellow front control module (fcm) batt #1 19 20 amp yellow lt trailer-tow stop/ turn 20 20 amp yellow front control module (fcm) batt #3 21 20 amp yellow rt trailer-tow stop/ turn 22 30 amp pink final drive control module (fdcm) mod 23 50 amp r...

  • Page 340

    Insure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. Replacement bulbs interior lights bulb type glove box light . . . . . . . . . . . . . . . . . . . . . . . . . 194 grab handle light . . . . . . . . . . . . . . . . L002825w5w overhea...

  • Page 341

    Bulb replacement head light 1. Open the hood. 2. Remove the headlamp cover. 3. Turn the low or high beam bulb 1/4 turn counter clockwise to remove from housing. 4. Disconnect the electrical connector and replace the bulb. Maintaining your vehicle 341 7.

  • Page 342

    Caution! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front turn signal 1. Open the hood. 2. Remove the headlamp cover. 342 maintaining your vehicle.

  • Page 343

    3. Turn the turn signal bulb 1/4 turn counter clockwise to remove from housing. 4. Disconnect the electrical connector and replace the bulb. Caution! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, cl...

  • Page 344

    Caution! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Rear tail, stop, turn signal, and back-up lights 1. Raise the liftgate. 2. Remove the two torx fasteners. ...

  • Page 345

    3. Squeeze the socket assembly tabs to remove it from the housing. 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and reattach the light assembly. Center high mounted stop light (chmsl) 1. Remove the two screws securing the chmsl. 2. Twist the bulb socket t...

  • Page 346

    Fluid capacities u.S. Metric fuel (approximate) 21 gallons 79 liters engine oil with filter 6.1 liter engine (sae 0w-40, api certified) 7 qts 6.6 liters cooling system * 6.1 liter engine (mopar 威 engine coolant/antifreeze 5 year/ 100,000 mile formula) 14.8 qts 14 liters * includes heater and coolant...

  • Page 347

    Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5 year/100,000 mile formula hoat (hybrid or- ganic additive technology) engine oil (6.1l engine) use api certified sm/cf synthetic engine oil. Sae 0w-40 is recommended, ...

  • Page 348

    Chassis component fluid, lubricant, or genuine part automatic transmission mopar 威 atf+4 automatic transmission fluid transfer case mopar 威 nv146 transfer case fluid or equivalent. Usage of other fluid/ lubricants is not recommended. Axle differential (front-rear) mopar 威 synthetic gear & axle lubri...

  • Page 349: Maintenance Schedules

    Maintenance schedules contents 䡵 emission control system maintenance . . . . . . . . 350 䡵 maintenance schedules . . . . . . . . . . . . . . . . . . . 350 ▫ schedule “b” . . . . . . . . . . . . . . . . . . . . . . . . 353 ▫ schedule “a” . . . . . . . . . . . . . . . . . . . . . . . . 363 8 m a i n t...

  • Page 350

    Emission control system maintenance the “scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done t...

  • Page 351

    Note: most vehicles are operated under the conditions listed for schedule “b.” note: if any of these apply to you, change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first, and follow the maintenance rec- ommendations in “maintenance schedule b.” note: if any of these a...

  • Page 352

    Once a month • check the tire pressure and look for unusual wear or damage. • inspect the battery and clean and tighten the terminals as required. • check the fluid levels of the coolant reservoir, brake master cylinder, and add as needed. • check all lights and all other electrical items for correc...

  • Page 353

    Schedule “b” follow this schedule if you usually operate your vehicle under one or more of the following conditions. • day or night temperatures are below 32°f (0°c) • stop and go driving • excessive engine idling • driving in dusty conditions • short trips of less than 10 miles (16.2 km) • more tha...

  • Page 354

    Miles 3,000 6,000 9,000 12,000 15,000 (kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) change the engine oil and engine oil filter, if not replaced at 3 months. X x x x x inspect the engine air cleaner filter, replace if nec- essary. X drain and refill the front and rear axles. X inspect the...

  • Page 355

    Miles 18,000 21,000 24,000 27,000 30,000 (kilometers) (30 000) (35 000) (40 000) (45 000) (50 000) change the engine oil and engine oil filter, if not replaced at 3 months. X x x x x inspect the engine air cleaner filter, replace if nec- essary. X inspect the pcv valve, replace if necessary. 〫 x dra...

  • Page 356

    Miles 33,000 36,000 39,000 42,000 45,000 (kilometers) (55 000) (60 000) (65 000) (70 000) (75 000) change the engine oil and engine oil filter, if not replaced at 3 months. X x x x x inspect the engine air cleaner filter, replace if nec- essary. X drain and refill the front and rear axles. X inspect...

  • Page 357

    Miles 48,000 51,000 54,000 57,000 60,000 (kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) change the engine oil and engine oil filter, if not replaced at 3 months. X x x x x inspect the engine air cleaner filter, replace if nec- essary. X inspect the pcv valve, replace if necessary. 〫 x in...

  • Page 358

    Miles 63,000 66,000 69,000 72,000 75,000 (kilometers) (105 000) (110 000) (115 000) (120 000) (125 000) change the engine oil and engine oil filter, if not replaced at 3 months. X x x x x inspect the engine air cleaner filter, replace if nec- essary. X inspect the drive belt, replace if necessary. X...

  • Page 359

    Miles 78,000 81,000 84,000 87,000 90,000 (kilometers) (130 000) (135 000) (140 000) (145 000) (150 000) change the engine oil and engine oil filter, if not replaced at 3 months. X x x x x inspect the engine air cleaner filter, replace if nec- essary. X inspect the pcv valve, replace if necessary. 〫 ...

  • Page 360

    Miles 93,000 96,000 99,000 102,000 105,000 (kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) change the engine oil and engine oil filter, if not replaced at 3 months. X x x x x inspect the engine air cleaner filter, replace if nec- essary. X replace the spark plugs. X inspect the drive ...

  • Page 361

    Miles 108,000 111,000 114,000 117,000 120,000 (kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) change the engine oil and engine oil filter, if not replaced at 3 months. X x x x x inspect the engine air cleaner filter, replace if nec- essary. X inspect the pcv valve, replace if necessar...

  • Page 362

    Inspection and service should also be performed anytime a malfunction is observed or suspected. Retain all re- ceipts. 〫 this maintenance is recommended by the manufac- turer to the owner, but is not required to maintain emissions warranty. * this maintenance is not required if the belt was previous...

  • Page 363

    Schedule “a” miles 6,000 12,000 18,000 24,000 30,000 (kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [months] [6] [12] [18] [24] [30] change the engine oil and engine oil filter. X x x x x inspect the engine air cleaner filter, and replace if necessary. X inspect the brake linings. X drain...

  • Page 364

    Miles 36,000 42,000 48,000 54, 000 (kilometers) (60 000) (70 000) (80 000) (90 000) [months] [36] [42] [48] [54] change the engine oil and engine oil filter. X x x x inspect the brake linings. X x 364 schedule “a” 8 m a i n t e n a n c e s c h e d u l e s.

  • Page 365

    Miles 60,000 66,000 72,000 78,000 (kilometers) (100 000) (110 000) (120 000) (130 000) [months] [60] [66] [72] [78] change the engine oil and engine oil filter. X x x x inspect the engine air cleaner filter, and replace if nec- essary. X inspect the pcv valve, replace if necessary. 〫 x inspect the d...

  • Page 366

    Miles 84,000 90,000 96,000 102, 000 (kilometers) (140 000) (150 000) (160 000) (170 000) [months] [84] [90] [96] [102] change the engine oil and engine oil filter. X x x x inspect the engine air cleaner filter, and replace if nec- essary. X inspect the pcv valve, replace if necessary. 〫 x replace th...

  • Page 367

    Miles 108,000 114,000 120,000 (kilometers) (180 000) (190 000) (200 000) [months] [108] [114] [120] change the engine oil and engine oil filter. X x x inspect the engine air cleaner filter, and replace if necessary. X inspect the pcv valve, replace if necessary. 〫 x inspect the drive belt, replace i...

  • Page 368

    Warning! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. 368 schedule “a” 8 m a i n t e n a n c e s c h e d ...

  • Page 369: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 ▫ prepare for the appointment . . . . . . . . . . . . 370 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . . . 370 ▫ be reasonable...

  • Page 370

    Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty, discuss additional charges with the service manager. ...

  • Page 371

    Technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner. This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • if for some reason you are still not satisfied, talk t...

  • Page 372

    Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer who has access to a tdd ...

  • Page 373

    Warranty information (u.S. Vehicles only) see the warranty information booklet for the terms and provisions of daimlerchrysler’s warranties applicable to this vehicle. Mopar 姞 parts mopar 威 fluids, lubricants, parts, and accessories are available from your dealer. They will help you keep your vehicl...

  • Page 374

    Publication order forms to order the following manuals, you may use either the website or the phone numbers listed below. Visa, mas- tercard, american express, and discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form. Note: a street address is required wh...

  • Page 375

    Call toll free at: • 1–800–890–4038 (u.S.) • 1–800–387–1143 (canada) or visit us on the world wide web at: • www.Techauthority.Daimlerchrysler.Com • www.Daimlerchrysler.Ca/manuals department of transportation uniform tire quality grades the following describes the tire grading categories estab- lish...

  • Page 376

    On specified government test surfaces of asphalt and concrete. A tire marked c may have poor traction perfor- mance. Warning! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction chara...

  • Page 377: Index

    Index 10

  • Page 378

    Abs (anti-lock brake system) . . . . . . . . . . . . 173,245 adding engine coolant (antifreeze) . . . . . . . . . . 320 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 adding washer fluid . . . . . . . . . . . . . . . . . . . . . 165 additives, fuel . . . . . . . . . . . . . . ...

  • Page 379

    Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 emergency starting . . . . . . . . . . . . . . . . . . . . . 293 keyless transmitter replacement (rke) . . . . . . . 23 saving feature (protection) . . . . . . . . . . . . . . . 114 bearings . . . . . . . . . . . . . . . . . ....

  • Page 380

    Cellular phone . . . . . . . . . . . . . . . . . . . . . . . . . . 78 center high mounted stop light . . . . . . . . . . . . 345 chart, tire sizing . . . . . . . . . . . . . . . . . . . . . . . . 251 checks, safety . . . . . . . . . . . . . . . . . . . . . . . . . 66,67 child restraint . . . . . . ....

  • Page 381

    Diagnostic system, onboard . . . . . . . . . . . . . . . . 301 dimmer switch, headlight . . . . . . . . . . . . . . . . . 119 dipsticks power steering . . . . . . . . . . . . . . . . . . . . . . . . 314 disposal antifreeze (engine coolant) . . . . . . . . . . . . . . . 321 door locks . . . . . . . ....

  • Page 382

    Oil change interval . . . . . . . . . . . . . . . . . . . . 306 oil selection . . . . . . . . . . . . . . . . . . . . . . . 307,346 overheating . . . . . . . . . . . . . . . . . . . . . . . . . . 293 starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 temperature gauge . . . . . ....

  • Page 383

    Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272 clean air . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271 filler cap (gas cap) . . . . . . . . . . . . . . . . . . . . 274 filter . . . . . . ....

  • Page 384

    Heated mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . 77 heated seats . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 high beam indicator . . . . . . . . . . . . . . . . . . . . . 172 high beam/low beam select (dimmer) switch . . 119 hitches trailer towing . . . . . . . . . . ...

  • Page 385

    Latch (lower anchors and tether for children) . . . . . 58,60 lead free gasoline . . . . . . . . . . . . . . . . . . . . . . 270 leaks, fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 life of tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 liftgate . . . . . . . . ...

  • Page 386

    Low tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 malfunction indicator (check engine) . . . . . . . . 172 map reading . . . . . . . . . . . . . . . . . . . . . . . . . 120 oil pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 174 passing . . . . . . . . . . . . . . . ....

  • Page 387

    Malfunction indicator light (check engine) . . 172,302 manual, service . . . . . . . . . . . . . . . . . . . . . . . . . 374 memory feature (memory seat) . . . . . . . . . . . . . 107 memory seat . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 memory seats and radio . . . . . . . . . . . ....

  • Page 388

    Opener, garage door (homelink 威 ) . . . . . . . . . . . 145 outside rearview mirrors . . . . . . . . . . . . . . . . . . 75 overhead console . . . . . . . . . . . . . . . . . . . . . . . 144 overheating, engine . . . . . . . . . . . . . . . . . . . 176,293 owner’s manual (operator manual) . . . . . ...

  • Page 389

    Radio, navigation . . . . . . . . . . . . . . . . . . . . . . . 209 radio operation . . . . . . . . . . . . . . . . . . . . . . 195,221 radio, satellite . . . . . . . . . . . . . . . . . . . . . . . 210,216 radio (sound systems) . . . . . . . . . . . . . . . . . . . . 195 rain sensitive wiper system...

  • Page 390

    Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 adjustable upper shoulder anchorage . . . . . . . . 40 and pregnant women . . . . . . . . . . . . . . . . . . . 42 child restraint . . . . . . . . . . . . . . . . . . . . . . . 54,62 extender . . . . . . . . . . . . . . . . . ...

  • Page 391

    Spark plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 speed control (cruise control) . . . . . . . . . . . . . . 128 speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 automatic transmissi...

  • Page 392

    General information . . . . . . . . . . . . . . . . . . . . 258 high speed . . . . . . . . . . . . . . . . . . . . . . . . . . 261 inflation pressures . . . . . . . . . . . . . . . . . . . . . 260 life of tires . . . . . . . . . . . . . . . . . . . . . . . . . . 264 load capacity . . . . . . . . . ....

  • Page 393

    Transmitter, remote keyless entry (rke) . . . . . . . . 19 tread wear indicators . . . . . . . . . . . . . . . . . . . . 263 turn signals . . . . . . . . . . . . . . . . . . . 118,172,342,344 uconnect™ (hands-free phone) . . . . . . . . . . . . . . 78 underhood fuses . . . . . . . . . . . . . . . . ...

  • Page 394

    Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 windshield wiper blades . . . . . . . . . . . . . . . . . . 316 windshield wipers . . . . . . . . . . . . . . . . . . . . . . . 121 wiper blade replacement . . . . . . . . . . . . . . . . . . 316 wipers, intermittent . . . . . ....

  • Page 395: Notes

    Notes.

  • Page 396: Notes

    Notes.

  • Page 397: Notes

    Notes.

  • Page 398: Notes

    Notes.

  • Page 399: Notes

    Notes.

  • Page 400: Notes

    Notes.