K-Star TAC-09CHSA User Manual - Protection

Manual is about: split wall-mounted Air Conditioner

Summary of TAC-09CHSA

  • Page 1

    P le a s e re a d th e u s e r s m a n u a l c a re fu lly b e fo re u s in g th e p ro d u c t user's manual split wall-mounted air conditioner model tac-09chsa tac-12chsa tac-18chsa tac-24chsa k-star international group inc. Tollfree:(800)893-2169 e-mail:info@kstarus.Com www.Kstarus.Com g g 2 5 e ...

  • Page 2: Contents

    Contents safety precautions........................................................................1 identification of parts...................................................................2 remote controller........................................................................4 operation instru...

  • Page 3: Safety Precautions

    1 safety precautions symbols in this use and care manual are interpreted as shown below. Be sure not to do. Pay attention to such a situation. Grounding is essential. Be sure to follow this instruction. Do not use the power supply circuit breaker or pull off the plug to turn it off during operation....

  • Page 4: Identification Of Parts

    2 the figures in this manual are based on the external view of a standard model. Consequently, the shape may differ from that of the air conditioner you have selected. Air intake air intake air outlet louver vertical adjustment louver horizontal adjustment electrostatic filter (optional) charcoal fi...

  • Page 5: Identification Of Parts

    3 identification of parts operating and display 1 1 on/off the above operating sketch map is suitable for e f g h j k m and n series. The above operating sketch map is suitable for l and r series. Remarks:when remote controller is out of work,open the panel and you can see emergency button there,see...

  • Page 6: Remote Controller

    4 remote controller remote controller 1 1 the remete controller transmits signals to the system. Mode button fan speed control button up button (too cool button) down button (too warm button) on/off button sleep button swing control button timer button used to select the type of operation mode: feel...

  • Page 7: Remote Controller

    Remote controller remote controller 1 1 note:the above remote controller is only for reference,please subject to the substantiality. Although the air con is not running,remote controller still have some display. The light of the remote controller will be turned on by pressing any button for 1.5~3 se...

  • Page 8: Remote Controller

    6 how to insert the batteries how to use remove the battery cover according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are matched correctly. Re-attach the cover by sliding it back into position. Note: use 2 lr03 aaa(1.5volt) batteries. Do not use rechar...

  • Page 9

    7 selecting feel mode setting temperature turning on press button, when the appliance receives the signal, the run indicator of the indoor unit lights up. Operation instructions with the remote controller pointing toward the air conditioner. When the unit is not at feel mode. The operation of the au...

  • Page 10

    8 timer mode it is convenient to set the timer on with timer button when you go out in the morning to achieve a comfortable room temperature when you get home. You can also set timer off at night to enjoy a good sleep. Note: after setting the timer,check that timer indicator lamp of the indoor unit ...

  • Page 11: Maintenance

    9 turn off the appliance first before disconnecting from power supply. It is necessary to clean the air filter after using it for about 100 hours. Clean it as follows: front panel maintenance air filter maintenance cut off the power supply never use volatile substance such as gasoline or polishing p...

  • Page 12: Protection

    10 noise pollution operating condition the protective device maybe trip and stop the appliance in the cases listed below. Heating o outdoor air temperature is over 24c cooling dry o outdoor air temperature is below -7c o (-15c for inverter models,it 's optional ) o room temperature is over 27c o out...

  • Page 13: Troubleshooting

    11 trouble analysis does not run no cooling or heating air ineffective control does not operate immediately peculiar odor a sound of flowing water cracking sound is heard spray mist from the outlet the compressor indicator(red) lights on constantly,and indoor fan stops. The unit is shifting from hea...

  • Page 14: Installation Instructions

    12 distance from ceiling distance from wall should be over 150mm distance from the wall distance from floor air intake distance from the wall should be over 300mm air intake distance from the wall over 500mm air o utle t dis tan ce f rom the wa ll sho uld be ove r 20 00m m should be over 150 mm shou...

  • Page 15: Installation Instructions

    13 outdoor unit outdoor unit indoor unit installation diagram indoor unit pipe length is 15 meters max. Pipe length is 15 meters max. B e l e s s t h a n 5 m b e l e s s t h a n 5 m h e ig h t s h o u ld h e ig h t s h o u ld installation instructions select the best location location for installing...

  • Page 16: Installation Instructions

    14 piping direction 1 2 3 4 trough note: when installing the pipe at the directions 1,2 or 4, saw the corresponding unloading piece off the indoor unit base. Unloading piece saw the unloading piece off along the trough put the piping (liquid and gas pipe) and cables through the wall hole from outsid...

  • Page 17: Installation Instructions

    15 installation instructions piping joints thermal insulation: wrap the piping joints with thermal insulation materials and then wrap with a vinyl tape. Piping thermal insulation: a. Place the drain hose under the piping. B. Insulation material uses polythene foam over 6mm in thickness. Note: drain ...

  • Page 18: Installation Instructions

    16 4. Connecting of the cable outdoor unit indoor unit 1). Remove the access door from the unit by loosening connect the power connecting cord to the indoor unit by connecting the wires to the terminals on the control board individually in accordance with the outdoor unit connection. The screw. Conn...

  • Page 19: Installation Instructions

    17 fix with bolts and nuts tightly on a flat and strong floor. If installed on the wall or roof, make sure to fix the supporter well to prevent it from shaking due to serious vibration or strong wind. 3. Outdoor unit piping connection 4. Outdoor unit cable connection (see previous page) remove the v...

  • Page 20: Installation Instructions

    18 (3) fix the accessory cable with the interconnection cable block. (4) confirm the fixing of the accessory cable is ok. (2) take off the block for interconnection cable, then put the core of the power wire to the terminal and fix it according to the diagrams pasted to indoor and outdoor unit separ...

  • Page 21: Installation Instructions

    19 (1). Unscrew and remove caps from 2 and 3-way valves. (4). Start vacuum pump for 10-15 minutes until reaching a vacuum of 10 mm hg absolutes. (6). Open 2-way valve 1/4 turn then close it after 10 seconds. Check tightness of all joints using liquid soap or an electronic leak detector. (7). Turn 2 ...