K-Tech ET301 Series Instruction manual
K-Tech
ET301 Series
Keypad
Speakerphone
Instruction Manual
Keep This Booklet for
Reference
Additional information is available at
www.KTechOnline.com
BOK041 rev. 060621 Printed in USA
Phone (860) 489-9399
Phone: 1-800-993-9399
Fax (860) 489-4399
56 Ella Grasso Ave
Torrington, CT 06790 USA
K-Tech International, Inc
Serial Number:
____________________________
Date Installed:
____________________________
Installed by:
____________________________
Phone Line #:
____________________________
Phone line Voltage:
48VDC (POTS or CO line)
THE INFORMATION BELOW IS IMPORTANT.
YOU MUST HAVE THE SERIAL NUMBER
AVAILABLE WHEN CALLING K-TECH .
K-Tech International, Inc does not represent this
product to be waterproof. To prevent fire or shock
hazard, DO NOT expose this unit to rain or mois-
ture. For more information on moisture resistant
units, contact K-Tech.
Warning
Refer to the Service and Warranty sheet enclosed
with this unit.
Service & Warranty
Operation
Making Calls
1. Press
ON/OFF
button, LED will turn ON
2. Dial a telephone number
3. When finished press ON/OFF button, LED will
shut OFF
Answering Calls
1. To answer the phone, press ON/OFF button,
LED will turn ON
2.
When finished, press ON/OFF button, LED will
shut OFF
Adjusting the speaker volume (4 levels)
While the unit is turned on, press VOL button to
increase the volume. After Level 4 the volume
resets to Level 1.
Made in the USA
The K-Tech ET301 series meets FCC Part 15, Part
68 and IC standards and is ETL listed.
FCC Registration # US: ERCAL11BET301
Ringer Equivalence (REN) = 1.1B
Registration