Kaisai 12K Installation Manual - page 13

Manual is about: CEILING & FLOOR TYPE

Summary of 12K

  • Page 1

    Ceiling & floor type installation manual ceiling and floor type thank you very much for purchasing our air conditioner, before using your air conditioner, please read this manual carefully and keep it for future reference. Installation manual.

  • Page 2

    If used as multi unit, please refer to the installation & operation manuals packed with outdoor unit..

  • Page 3

    Precautions...................................................................................1 installation information..........................................................2 accessories...................................................................................3 indoor unit installation...

  • Page 4

    2 indoor unit installation; outdoor unit installation; install the refrigerant pipe; connect the drain pipe ; electric wiring work; test operation. Twins function; if the refrigerant leaks during installation, ventilate the area immediately. Toxic gas may be produced if the refrigerant comes into th...

  • Page 5

    2 indoor unit installation; outdoor unit installation; install the refrigerant pipe; connect the drain pipe ; electric wiring work; test operation. Twins function; if the refrigerant leaks during installation, ventilate the area immediately. Toxic gas may be produced if the refrigerant comes into th...

  • Page 6

    B c d a e hook connecting point of refrigerant pipe connecting point of refrigerant pipe drain point (gas side) (liquid side) 4 keep indoor unit, outdoor unit, power supply wiring and transmission wiring at least 1 meter away from televisions and radios. This is to prevent image interference and noi...

  • Page 7

    B c d a e hook connecting point of refrigerant pipe connecting point of refrigerant pipe drain point (gas side) (liquid side) 4 keep indoor unit, outdoor unit, power supply wiring and transmission wiring at least 1 meter away from televisions and radios. This is to prevent image interference and noi...

  • Page 8

    2.1 precautions for selecting the location 2.2 figure of body size 2. Outdoor unit installation 1) choose a place solid enough to bear the weight and vibration of the unit, where the operation noise will not be amplified. 2) choose a location where the hot air discharged from the unit or the operati...

  • Page 9

    2.1 precautions for selecting the location 2.2 figure of body size 2. Outdoor unit installation 1) choose a place solid enough to bear the weight and vibration of the unit, where the operation noise will not be amplified. 2) choose a location where the hot air discharged from the unit or the operati...

  • Page 10

    3 install the refrigerant pipe execute heat insulation work completely on both sides of the gas piping and liquid piping. Otherwise, this can sometimes result in water leakage. (when using a heat pump, the temperature of the gas piping can reach up to approximately 120 . Use insulation which is suff...

  • Page 11

    3 install the refrigerant pipe execute heat insulation work completely on both sides of the gas piping and liquid piping. Otherwise, this can sometimes result in water leakage. (when using a heat pump, the temperature of the gas piping can reach up to approximately 120 . Use insulation which is suff...

  • Page 12

    10 for local insulation, be sure to insulate local piping all the way into the pipe connections inside the unit. Exposed piping may cause condensation or may cause burns when touched. Make sure that no oil remains on plastic parts of the decoration panel (optional equipment). Oil may cause degradati...

  • Page 13

    10 for local insulation, be sure to insulate local piping all the way into the pipe connections inside the unit. Exposed piping may cause condensation or may cause burns when touched. Make sure that no oil remains on plastic parts of the decoration panel (optional equipment). Oil may cause degradati...

  • Page 14

    12 how to connect wiring precautions remove the control box lid of the indoor unit. Remove the cover of the outdoor unit. Follow the "wiring diagram label" attached to the indoor unit's control box lid to wire the outdoor unit, indoor unit and the remote controller. Securely fix the wires with a fie...

  • Page 15

    12 how to connect wiring precautions remove the control box lid of the indoor unit. Remove the cover of the outdoor unit. Follow the "wiring diagram label" attached to the indoor unit's control box lid to wire the outdoor unit, indoor unit and the remote controller. Securely fix the wires with a fie...

  • Page 16: Qsdli-016Aen(Ce)

    Qsdli-016aen(ce) 16122500000090 20150122 the design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. Qsdli-016aen(ce) 16122500000090 20150122 the design and specifications are subject to change without p...