Kalerm KLM1601 Operation Manual - page 17
14
2
1
Milk unit is cleaning.
After cleaning finished, the machine enters
into “READY” status.
Descaling the coffee machine
The daily usage will cause calcareous deposited in coffee
machine. The depositing rate varies
with the local water
hardness.
Decalcifier contains acidic substances that would stimulate
your eyes and skin, so you must strictly comply with the
security warnings noted by manufacturer on the packaging.
If you have contacted it with your eyes or skin by accident,
please wash it with clean water immediately.
Dissolve the decalcifier in clean water, and then put the
mixed liquid into the water tank. Fully dissolve the decalcifier
can descale the coffee machine more thoroughly.
The whole descaling process takes about 30 minutes.
The termination during the descaling process will damage
the coffee machine. So once you start the descaling process,
please do not terminate it midway.
●
●
●
●
●
NEED DESCALE
PRESS RINSE
After a centain time use, if it reaches the
degree of descaling, “NEEDS DESCALE"and"
PRESS RINSE " will automatically display on
the screen alternately. Now, press the
cleaning button to enter the descaling
program.
30 MINS
PRESS RINSE
MAINTENANCE
DESCALE
Turn the rotary button to maintenance
setting option, press rotary button to enter.
Turn the rotary button to descaling option,
press rotary button to enter.
After entering the descaling program, press
cleaning button to start the descaling
program; it will take 25 minutes.
Cleaning and maintenance
RINSE MILK UNIT
Please empty the drip tray after the cleaning program is completed.