Summary of K 10613
Page 1
K 10613 cordless two speed drill/driver.
Page 2: Safety and Precaution
2 safety and precaution 1 consider work area environment. Do not expose tools to rain. Do not use tools in damp or wet locations – keep work area clean and well lit. Do not use tools in the present of flammable liquids or gases. 2 guard against electric shock. Avoid body contact with earthed or grou...
Page 3: Product Safety Instructions
3 product safety instructions 1 disconnect battery pack from tool or place the main switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventa- tive safety measures reduce the risk of starting the tool accidentally. 2 remove adjusting...
Page 4: Additional Safety Rules For
4 additional safety rules for charger & battery pack 1 do not charge battery pack when temperature is below 10°c (50°f) or above 40°c (104°f). 2 do not attempt to use a set-up transformer, an engine generator or dc power receptacle. 3 do not allow anything to cover or clog the charger vents. 4 alway...
Page 5: Product Specifications
5 product specifications model no. K 10613 voltage 18v dc no load speed/min low: 0–1220 rpm high: 0–340 rpm max torque 45 nm (33 ft-lb) tool weight (with battery) 2.08 kg chuck capacity keyless 1/2” (13 mm) clutch 17 sections charging time 1 hour auto cut-off major components accessory charger chuck...
Page 6: Operating Instructions
6 operating instructions installing or removing battery pack (see fig.1 fig.2) 1 always switch off the machine before insertion or removal of the battery pack. 2 to remove the battery pack, push the button on the battery pack and pull the tool unit from the battery pack in the direction.(see fig.1.)...
Page 7: Led Light On The Charger
7 led light on the charger power on (green light flashes slowly) battery low (red light stays illuminated) battery charged 80% (green light flashes rapidly) battery charged 100% (green light stays illuminated) battery pack temperature is too hot or too cold (red light flashes slowly) battery pack ma...
Page 8: Tool Operating
8 tool operating how to insert and remove bits 1 to insert a bit, turn the chuck clockwise. 2 to remove a bit, turn the chuck counterclockwise. Forward/reverse knob selection button select the forward or reverse direction of the tool by pushing the forward/reverse knob. Turn counter clockwise insert...
Page 9
9 high/low speed selection use the “high” for drilling application. Use the “low” form screwdriver application. Select the applied torque use the 17 sections adjustment ring to select the right torque for your application. Drill mode turn the torque ring to the sign for the maximum torque position i...
Page 10: Parts K 10613
10 parts k 10613 1 2 3 6 4 5 8 7 9 10 11 12 13 14 14 15 16 17 18 19 20 22 23 24 21.
Page 11: Parts List K 10613
11 no parts name qt spare part no 1 chuck screw 1 2 keyless chuck 1 3 gear boc ass’y 1 k 10265 4 high/low speed knob 1 k 10267 5 knob spring 1 6 speed change ring 1 7 motor connector 1 8 screw 2 9 motor ass’y 1 k 10266 10 forward/reverse knob 1 11 main switch 1 k 10268 12 discharge protector 1 13 ba...
Page 12
Www.Kamasatools.Com k 10613.