Cdg series liquid dispensers cdg-211 cdg-311 north american operators manual kanpak llc, 425 main street north, southbury, ct 06488 phone: 800.569.0826 or 203.264.7203 • fax: 203.264.7292 • email: kpservice@kanpak.Us www.Kanpak.Us 8-0500-0003 - 20121212.
Introduction…………………………..…….……….. 1 inspection for damage………………….. 1 safety……………………………………………….. 1 specifications………………………………………….. 2 unpacking the dispenser………………….….... 3 reshipment…………………………………………….…. 3 requirements and servicing electrical requirements………………. 3 electrical servicing………………….……. 3 re...
Cdg series liquid dispensers operators manual please read this manual now, and retain it for future reference kanpak cdg series liquid dispensers provides a temperature controlled environment to sustain liquid product, such as cream, milk, and other liquids. The product selections are made by depres...
Specifications power supply requirements 120 vac, 60 hz, 1 phase, 4 amp refrigeration cold wall evaporation 1/6 hp compressor 134a refrigerant, 165 grams certifications nsf/ansi standard 20 ul standard 471 csa c22.2 no.120 model type products description weight dimensions (lxwxh) cdg211 h 2 x 2 ½ ga...
Unpacking the dispenser warning: do not attempt to lift the dispenser from the box. Improper lifting may damage the dispenser. Inspect the box for any shipping damage. Remove the protective material from the top and sides of the dispenser. Remove the corrugated tube from the base. Remove the dispens...
Installation and location when locating your cdg series dispenser, convenience and accessibility to best serve your operation are important considerations, but the following factors must be observed: counters, platforms, or shelves should be strong enough to support the dispenser and full containers...
Loading product kanpak cdg series dispensers are manufactured to be used in with prepackaged bag-in-box products. Ensure the dispenser has achieved proper operating temperature by running empty for one hour before loading pre-chilled product to be dispensed. Product must be pre-chilled prior to load...
Operation when the initial startup is complete, operating your cdg series dispenser is simple. • place cup under the product tube. • push lever down for the desired quantity and product. • load product as needed. • perform preventative maintenance as outlined. Maintenance though the preventative mai...
Display the cdg series dispensers have multiple display options available. Reference the applicable display option(s) for your dispenser. Lcd confirms power lcd turns on by switching the power control switch on. O “always fresh” = power is on. O no display = power is off. Information displayed lcd i...
Trouble shooting guide issue cause solution no power, display, or lights (as applicable). Power switch is not turned on. Reset the power control switch located on the lower left side of the unit. Turn the switch off, wait 5 seconds, then turn the switch on. Circuit breaker on the dispenser is trippe...
Drawings page 9.
Drawings this page is intentionally left blank. Page 10
Drawings page 11.
Drawings page 12.
Drawings page 13.
Drawings page 14.
Cdg-211 h parts diagram page 15.
Cdg-211 v parts diagram page 16.
Warranty all dispensing equipment manufactured by kanpak is warranted against defects in materials and workmanship for a period of one (1) year from the date of purchase. This warranty does not apply to installation or problems because of installation. This warranty does not apply to normal preventa...
Kanpak llc 425 main street north southbury, ct 06488 phone: 800.569.0826 or 203.264.7203 fax: 203.264.7292 email: kpservice@kanpak.Us www.Kanpak.Us.