1. DL manuals
  2. Kapsys
  3. Cell Phone
  4. SmartVision
  5. User Manual

Kapsys SmartVision User Manual

Other manuals for SmartVision: Quick Start Manual, User Manual, User Manual

Summary of SmartVision

  • Page 1

    Smartvision – user guide (rev. 2.4)smart vision 1336 1 smartvision smartvision lite user guide.

  • Page 2

    Smartvision – user guide (rev. 2.4)smart vision 1336 2 introduction congratulations on purchasing smart vision or smart vision lite. Smart vision is the first android smartphone especially designed for people with low vision and visual impairment. Smart vision combines a physical keypad, a full voic...

  • Page 3

    Smartvision – user guide (rev. 2.4)smart vision 1336 3 content of the box smart vision by kapsys includes: - a battery - a 220/110v - 5v usb mains charger - a docking station for charging (1) . - a usb / micro usb cable - a lanyard - two stereo earphones with microphone and a push-to-talk button. - ...

  • Page 4

    Smartvision – user guide (rev. 2.4)smart vision 1336 4 table of contents introduction 2 content of the box 3 introducing smart vision 5 installation 8 keypad, touchscreen and voice control 13 accessibility mode 16 voice interface 22 screen reading 29 home screen 30 the notification status bar 31 app...

  • Page 5

    Smartvision – user guide (rev. 2.4)smart vision 1336 5 introducing smart vision front panel the numeric keypad at the bottom part of the front panel enables you to dial a phone number or type characters for text messaging using multi-tap mode. 4 control keys are located above the keypad: - " ok " ke...

  • Page 6

    Smartvision – user guide (rev. 2.4)smart vision 1336 6 top: the " on off " and screen off mode button is located on the top right side of the handset. Press and hold this button to start or stop your smart vision . A short keypress will set the handset to standby mode and an additional short press w...

  • Page 7

    Smartvision – user guide (rev. 2.4)smart vision 1336 7 rear: the emergency orange button is located on the back panel top left. Push down this button to start an emergency instance. On the right of this sos button are found the camera lens and a port for amplified listening..

  • Page 8

    Smartvision – user guide (rev. 2.4)smart vision 1336 8 installation inserting the sim card the sim card is issued by a telephone service provider when you take out your telephone contract. Please note: only mini-sim (2-ff) cards are supported by smart vision . If you have a different sim card, pleas...

  • Page 9

    Smartvision – user guide (rev. 2.4)smart vision 1336 9 the battery inserting the battery: 1. Insert first the bottom of the battery into the slots. 2. Snap the battery into place. 3. Put back the rear panel fitting the top part first. 4. Snap firmly and close your device..

  • Page 10

    Smartvision – user guide (rev. 2.4)smart vision 1336 10 charging the battery the battery you purchased with your smart vision is not fully charged. Before using the device, we recommend that you charge the battery for at least 4 hours. You may subsequently charge it as needed and depending on your u...

  • Page 11

    Smartvision – user guide (rev. 2.4)smart vision 1336 11 switch onoff your smart vision press and hold the " on off " button (on the top of the device) to start your smart vision . Release the button as soon as the device vibrates. Please note: if the device does not start, please check if the batter...

  • Page 12

    Smartvision – user guide (rev. 2.4)smart vision 1336 12 unlocking the pin on the sim card the sim card has a 4 digit identification code called pin. Pin helps you lock your sim card to avoid fraudulent use of your smart vision . To unlock the sim card and access the various functions in your smart v...

  • Page 13

    Smartvision – user guide (rev. 2.4)smart vision 1336 13 keypad, touchscreen and voice control the three interfaces or operating modes by smart vision : - the keypad operating mode is for those who know how to easily handle keys and buttons on a mobile phone. To become familiar with smart vision keyp...

  • Page 14

    Smartvision – user guide (rev. 2.4)smart vision 1336 14 the alphanumeric keypad located under these control keys, is presented in three rows of number keys organized from left to right as follows: - first row: 1, 2, 3, star keys. - second row: 4, 5, 6, 0 keys. - third row: 7, 8, 9, # keys. The alpha...

  • Page 15

    Smartvision – user guide (rev. 2.4)smart vision 1336 15 selecting or activating an item on the screen: make a short keypress or click on an item to select it, confirm an action, or display the virtual keypad in the provided input field. Make a long keypress to get more options for the selected item ...

  • Page 16

    Smartvision – user guide (rev. 2.4)smart vision 1336 16 accessibility mode this section describes specific commands and gestures as well as keypad shortcuts- hot-keys to help you control and interact with your smart vision when the accessibility mode is enabled (default setting). From the home scree...

  • Page 17

    Smartvision – user guide (rev. 2.4)smart vision 1336 17 edition mode: smart vision allows a quick and easy editor mode. This mode allows navigating into an input area to modify or insert a character or a word. To edit an input area, press continuously on star “*” key and simultaneously press one of ...

  • Page 18

    Smartvision – user guide (rev. 2.4)smart vision 1336 18 gesture control of the touchscreen: how to have an audio description of what is on the screen, place your finger on the screen, slide it from right to left then from left to right. You will hear a voice over description of items displayed on th...

  • Page 19

    Smartvision – user guide (rev. 2.4)smart vision 1336 19 how to move back to the previous display, place your finger on the screen, slide it down then left without removing your finger of the screen. You can also slide your finger down and to the right, you will hear the text-to-speech feature say " ...

  • Page 20

    Smartvision – user guide (rev. 2.4)smart vision 1336 20 how to open the "notification" status bar, place your finger on the screen and slide it from left to right and down. The voice over feature will indicate the status of your smartphone (wi-fi, bluetooth, gps, etc...), as well as the last ten not...

  • Page 21

    Smartvision – user guide (rev. 2.4)smart vision 1336 21 the virtual keypad to enter text into the input field, you can use the real keypad but also the virtual keypad. To access the virtual keypad, move your finger until you touch the input field, then press " ok " key without removing your finger f...

  • Page 22

    Smartvision – user guide (rev. 2.4)smart vision 1336 22 voice interface free yourself from the keypad, either physical or virtual. To activate the voice mode, look for the voice control key located on the right side of your handset, press it. Smart vision ’s voice interface integrates the latest gen...

  • Page 23

    Smartvision – user guide (rev. 2.4)smart vision 1336 23 controlling the screens through voice commands the voice control feature enables audio description of all texts displayed on your smart vision freeing you from using the physical or non physical keypad. 1. Press and release the voice control ke...

  • Page 24

    Smartvision – user guide (rev. 2.4)smart vision 1336 24 2. The " voice command " window opens, say clearly the keyword, for example " what time is it? " the answer is given by smart vision ’s text-to-speech functionality, for example: " it’s1:46pm ". Here are two additional examples of voice command...

  • Page 25

    Smartvision – user guide (rev. 2.4)smart vision 1336 25 voice command keywords the following voice commands have been implemented in the product and are the only words recognizable by smart vision . Smart vision keywords fall into three categories: - keywords to get information about your smartphone...

  • Page 26

    Smartvision – user guide (rev. 2.4)smart vision 1336 26 keywords used for activating a function or a setting menu opens the menu of the current application . Home restores the main screen. Back displays the previous screen. Notifications opens the notification status bar. Activate gps enables gps lo...

  • Page 27

    Smartvision – user guide (rev. 2.4)smart vision 1336 27 speech-to-text or dictation mode the voice interface also makes it possible to input text in a text field using speech-to- text. This feature is particularly useful for message or email writing, web searching or voice dialling a phone number. 1...

  • Page 28

    Smartvision – user guide (rev. 2.4)smart vision 1336 28 please note: to add punctuation marks (,? ! …), you must pronounce the name of the punctuation mark you want. Example: " would you like to come over for lunch next sunday question mark ". Please note: speech-to-text can be used for up to 30 sec...

  • Page 29

    Smartvision – user guide (rev. 2.4)smart vision 1336 29 screen reading smart vision is equipped with a speech synthesizer that reads the content of the screen to you. Screen reading occurs in the following instances: - a new screen appears, the title and the highlighted item are read back to you. - ...

  • Page 30

    Smartvision – user guide (rev. 2.4)smart vision 1336 30 home screen the home screen operates like a start menu from which you can start any application you need. To go back to the home screen, press the “home” key , the middle button below the display. The home screen presents smart vision ’s six ba...

  • Page 31

    Smartvision – user guide (rev. 2.4)smart vision 1336 31 whenever one of the above icons appears flagged with a red bubble that contains a number, it means there is one or more events for that application (such as missed calls, or incoming messages). The notification status bar the status bar is the ...

  • Page 32

    Smartvision – user guide (rev. 2.4)smart vision 1336 32 the status bar gives access to the panel of notifications where all alerts and events on your smartphone have been reported. Thanks to these notifications, you know exactly what event has occurred on your smartphone. To flick the panel open, sl...

  • Page 33

    Smartvision – user guide (rev. 2.4)smart vision 1336 33 applications from the home screen, press the " applications " icon and find a list of all the applications available in your smart vision . These applications are listed by alphabetical order. To start an application, scroll the list until you ...

  • Page 34

    Smartvision – user guide (rev. 2.4)smart vision 1336 34 favorites the " favorites " application is smart vision ’s most convenient functionality and is available from the home screen. It works like a directory in which your preferred applications or the ones you use most frequently are stored. Creat...

  • Page 35

    Smartvision – user guide (rev. 2.4)smart vision 1336 35 the " calculator " application can now be directly accessed from the " favorites " screen. Managing favorites to remove a favorite application, access the " favorites " menu, click on the application to be removed, press and hold the keypad " o...

  • Page 36

    Smartvision – user guide (rev. 2.4)smart vision 1336 36 telephone the " phone " application by smart vision is a very user friendly feature with a lot of options. How to make a call? 1. From the home screen, click on " phone " icon, the application main screen appears. 2. You can either type your co...

  • Page 37

    Smartvision – user guide (rev. 2.4)smart vision 1336 37 during a call, the following three icons will show at the bottom of the screen, offering you 3 additional options: turn on the loudspeaker (hands free mode). Mute the microphone. Show the virtual keypad, to key in digits when using an automated...

  • Page 38

    Smartvision – user guide (rev. 2.4)smart vision 1336 38 managing phone calls the " phone " application allows you to manage your phone numbers by priorities. When in the " phone " application, press the " menu " button. A menu appears: the " quick dial " option allows you to set your preferred numbe...

  • Page 39

    Smartvision – user guide (rev. 2.4)smart vision 1336 39 how to answer a call? When you receive an incoming call, a ringtone is heard. The unit immediately shows two keys: " accept " and " refuse ", even in screen off mode. The caller’s number appears in large format on the top of the screen. If the ...

  • Page 40

    Smartvision – user guide (rev. 2.4)smart vision 1336 40 whenever a caller leaves you a voice message, the message will show in the status bar with the voicemail symbol. To listen to your voice message, simply call your voicemail service making a long press on number key"1" from the physical keypad. ...

  • Page 41

    Smartvision – user guide (rev. 2.4)smart vision 1336 41 calling a number or a contact from the call history to call back a number or a contact from the call history, simply click on the number/contact from this screen, and the call is made instantly. At the end of the call, press the " c " key of th...

  • Page 42

    Smartvision – user guide (rev. 2.4)smart vision 1336 42 messaging the " messaging " application lets you send and receive short messages or sms and mms (text messages containing a multimedia item such as an image or a video, etc.) how to send a message? 1. From the home screen, click on the " messag...

  • Page 43

    Smartvision – user guide (rev. 2.4)smart vision 1336 43 5. Type your message in the text field using the physical keypad, the virtual keypad or speech-to-text (press and hold the voice control key to dictate). 6. When the entry is completed, click on " send ", your message will be sent and a convers...

  • Page 44

    Smartvision – user guide (rev. 2.4)smart vision 1336 44 messaging menu options click on the " messaging " icon from the home screen. Press the " menu " button to access the " messaging " application various options. The options below let you configure the " messaging " application to suit your own p...

  • Page 45

    Smartvision – user guide (rev. 2.4)smart vision 1336 45 to read your received messages from the home screen, click on " messaging " icon or on " new message " from the notification panel. Messages sent or received are listed by recipient or "discussion thread". Discussion threads with unread message...

  • Page 46

    Smartvision – user guide (rev. 2.4)smart vision 1336 46 e-mail the " e-mail " application lets you send and receive emails from your email account. The " e-mail " application by smart vision will not work unless you have an existing email account with an email service provider. Email account setup w...

  • Page 47

    Smartvision – user guide (rev. 2.4)smart vision 1336 47 please note: some email accounts may have special configuration options, please refer to our website www.Kapsys.Com , section " support ", for more details. Sending an email 1. From the home screen, click on the " e-mail " application. The inbo...

  • Page 48

    Smartvision – user guide (rev. 2.4)smart vision 1336 48 - to delete the message without saving, press the " menu " button and click on " discard ". You can also delete an email doing a long press on the email from the inbox. Receiving and reading an email when you receive an email, the home screen w...

  • Page 49

    Smartvision – user guide (rev. 2.4)smart vision 1336 49 managing email accounts you can add, edit or remove email accounts in your smart vision . - if you wish to modify an account configuration, press the " menu " button, click on " settings ", and select the account to be edited. - if you wish to ...

  • Page 50

    Smartvision – user guide (rev. 2.4)smart vision 1336 50 settings the parameters and settings for your smart vision can be found under the " settings " application. This application can also be accessed from the home screen in order to enable and disable specific functions or modify existing settings...

  • Page 51

    Smartvision – user guide (rev. 2.4)smart vision 1336 51 - " location services ": activate and manage localisation services (gps and network). - " security ": manage security settings (pin, lock screen, password , …). - " language &input ": configure display and keyboard language. - " backup & reset ...

  • Page 52

    Smartvision – user guide (rev. 2.4)smart vision 1336 52 - " caller id alert ": announces the name or phone number associated with an incoming call. - " voicemail alert ": announces an incoming message to your voice mail - " stop on shake ": stops text-to-speech mode by shaking the handset - " stop o...

  • Page 53

    Smartvision – user guide (rev. 2.4)smart vision 1336 53 connecting to wi-fi 1. From the home screen, click on " settings " icon, and on " wi-fi ". 2. Press the onoff switch on the screen top right to enable wi-fi connection. The list of available wi-fi networks appears. 3. Choose the network you wis...

  • Page 54

    Smartvision – user guide (rev. 2.4)smart vision 1336 54 please note: password and security keys (wep / wpa2) are supplied by your service provider. Please refer to these details to set up your connection and bear in mind the password may be case sensitive. Adjusting the ringtone 1. From the home scr...

  • Page 55

    Smartvision – user guide (rev. 2.4)smart vision 1336 55 please note: to adjust the volume on your smart vision , use the up and down volume keys on the left side of your handset. The volume control will apply to the audio source currently in use. Airplane mode the airplane mode disables all sources ...

  • Page 56

    Smartvision – user guide (rev. 2.4)smart vision 1336 56 updating the smartvision updates for your smartphone will be notified on the home screen with the red bubble over the " settings " icon. To activate the update, click on " settings " . Select " download ", and follow the instructions. Please no...

  • Page 57

    Smartvision – user guide (rev. 2.4)smart vision 1336 57 people the " people " application acts as a phone book in which all your contacts are found. This application has been placed by default in the " favorites " list giving you a direct access to the " people " list. How to create a contact you wi...

  • Page 58

    Smartvision – user guide (rev. 2.4)smart vision 1336 58 please note: more fields can be added by simply pressing the " menu " button, and clicking on" add field ". Editing a contact 1. Scroll the list until you reach the contact to be edited, select this contact. 2. The contact’s record is displayed...

  • Page 59

    Smartvision – user guide (rev. 2.4)smart vision 1336 59 4. The contact record is displayed in edit mode allowing you to modify, add or delete any field. 5. Save your changes by clicking on " ok " at the bottom of the list, or press the " menu " button, and click on " save ". Please note: if you wish...

  • Page 60

    Smartvision – user guide (rev. 2.4)smart vision 1336 60 the selected number is shown with a star. In the example below, pierre durand is now available in the " favorite " contact list within the " phone " and " messaging " applications. Please note: the " favorite " contact list applies to contacts,...

  • Page 61

    Smartvision – user guide (rev. 2.4)smart vision 1336 61 please note: you can quickly reach an item in the list of contacts using the keys 2 to 9 on the keypad. For example, pressing the " 6 " key to select the first contact beginning with the letter "m". Press twice the " 6 " key to select the first...

  • Page 62

    Smartvision – user guide (rev. 2.4)smart vision 1336 62 4. Then select the destination of the copy. In this case, the « phone ». 5. The list of all contacts stored on the sim card appears. 6. Select the contacts you want to save in the phone's internal memory and complete the import by selecting " o...

  • Page 63

    Smartvision – user guide (rev. 2.4)smart vision 1336 63 sos function for your security, smart vision offers an sos function which can be used to make location-based emergency calls or send urgent messages to pre-defined contacts (10 au maximum). Warning: kapsys shall not be held liable for any damag...

  • Page 64

    Smartvision – user guide (rev. 2.4)smart vision 1336 64 sos application set up before using the sos function, you need to configure the application as follows: 1. From the home screen, click on " favorites " , then on " sos " icon. 2. Read the warning and " accept " to continue. 3. The sos function ...

  • Page 65

    Smartvision – user guide (rev. 2.4)smart vision 1336 65 - " send location ", reports your geographical location in the message, if the information is available when the emergency call is sent. - " message text ", customises the contents of the message to be sent to your emergency numbers..

  • Page 66

    Smartvision – user guide (rev. 2.4)smart vision 1336 66 kapten (1) (1) : not available onsmart vision lite. Introduction the kapten application is primarily a navigation system designed for people with visual impairment. It relies on the satellite-positioning system (gps) to make your journey easier...

  • Page 67

    Smartvision – user guide (rev. 2.4)smart vision 1336 67 starting the navigation application from the home screen, click on " applications " , then on " kapten " . The kapten application is not operational until the gps feature is activated. If the gps is not active, you will be requested to activate...

  • Page 68

    Smartvision – user guide (rev. 2.4)smart vision 1336 68 different navigation modes select the navigation mode you want to use. " pedestrian navigation ": navigation is adapted for use on foot. " car navigation ": navigation is adapted for use in a car. " direct guidance ": used to guide you towards ...

  • Page 69

    Smartvision – user guide (rev. 2.4)smart vision 1336 69 navigate to a " new address " this setting is used to specify a postal address as the destination. Two options are available to define the postal address as the destination. "standard" input mode: enables you to enter this address in a single s...

  • Page 70

    Smartvision – user guide (rev. 2.4)smart vision 1336 70 at each stage, you can either use the keypad or speech recognition. Press and hold the voice control key and speak after the signal tone. A list of candidates will be suggested, select one and proceed to the next step. When you have entered the...

  • Page 71

    Smartvision – user guide (rev. 2.4)smart vision 1336 71 during navigation guidance instructions are displayed and announced during your entire trip. From top to bottom of the screen, you will find: - the name of the street you are in (pink zone). - the distance to the next manoeuver (black zone). - ...

  • Page 72

    Smartvision – user guide (rev. 2.4)smart vision 1336 72 - direction you need to take to get to your destination. This information is expressed in hours using the clock position format, from 1 to 12 hours, based on your last known direction. When “ direct guidance ” mode is enabled, distance cardinal...

  • Page 73

    Smartvision – user guide (rev. 2.4)smart vision 1336 73 when you get close to an intersection, kapten describes it by giving you the names of streets in the intersection. After leaving the intersection, kapten announces the next street you are heading to. By default, free navigation mode is automati...

  • Page 74

    Smartvision – user guide (rev. 2.4)smart vision 1336 74 "k-tag" menu from the kapten application, press the " menu " button, and click on " k-tag ". The following options are available: - " create k-tag ". - " modify k-tag ". - " delete k-tag ". Create a k-tag to create a k-tag, select one of the op...

  • Page 75

    Smartvision – user guide (rev. 2.4)smart vision 1336 75 if you do not wish to assign a voice memo, select " skip ", in this case, the nearest postal address will be used as k-tag identification. 2. Select the category you wish to assign this k-tag to: " contact ", " hotel and restaurant ", " transpo...

  • Page 76

    Smartvision – user guide (rev. 2.4)smart vision 1336 76 modify a k-tag from the " k-tag " screen, click on " modify k-tag ", and choose the category as well as the k-tag to be edited. When the k-tag is selected, you may modify its " category ", " voice memo " or " favorite " attribute. Select an opt...

  • Page 77

    Smartvision – user guide (rev. 2.4)smart vision 1336 77 "navigation" specific keywords the following keywords are operational only if the navigation mode is active. Stop navigation stops the current navigation session. Roadbook activates the road book during navigation. Remaining distance gives the ...

  • Page 78

    Smartvision – user guide (rev. 2.4)smart vision 1336 78 " pedestrian navigation " settings: - " automatic instruction repeat ": defines the time interval for repeating navigation announcements (none, 1, 3, 5 or 10 minutes). - " hour indication " enables or disables the hour indication in the instruc...

  • Page 79

    Smartvision – user guide (rev. 2.4)smart vision 1336 79 assistance this feature enables you to get support from a third party via a private and secured vpn based server, which will have temporary access to your smartphone and assist you in setting up your smart vision . Request of assistance from th...

  • Page 80

    Smartvision – user guide (rev. 2.4)smart vision 1336 80 "f1" key is assigned to smart vision " menu " button. "f2" key is assigned to smart vision " home screen " button. "f3" key is assigned to smart vision " back " button. Arrow keys are used to navigate through screens and menus on your smart vis...

  • Page 81

    Smartvision – user guide (rev. 2.4)smart vision 1336 81 calendar the " calendar " application opens a calendar showing the current week. Press the " menu" button to access the various options of the " calendar " menu: - " new event "schedules an appointment by filling out all the fields (event title...

  • Page 82

    Smartvision – user guide (rev. 2.4)smart vision 1336 82 camera select the " camera " application, and press the " menu " button to access the settings. Adjust the camera settings one by one. When done, press the blue button below the display to take a picture. You will hear the shutter sound when th...

  • Page 83

    Smartvision – user guide (rev. 2.4)smart vision 1336 83 video player the " video player " application is used to view videos stored in the phone internal memory or a micro sd card on your smart vision . The micro sd is a removable memory card used for storing information, it extends the overall stor...

  • Page 84

    Smartvision – user guide (rev. 2.4)smart vision 1336 84 sound recorder the " sound recorder " application is used to record voice memos. Select " record " to start recording the memo, click on " pause " to hold and on " stop " to end the recording. You can listen to a recorded memo by selecting the ...

  • Page 85

    Smartvision – user guide (rev. 2.4)smart vision 1336 85 browser the " browser " application is used to access the internet. Press the " menu " button to access the internet settings. Through "search" item from the menu you can launch a simple search using the default browser. Please note: you can al...

  • Page 86

    Smartvision – user guide (rev. 2.4)smart vision 1336 86 ocr (1) (1) : not available on smart vision lite. The ocr function scans a text by means of optical character recognition, and reads it, using text-to-speech function. The conversion rate depends on the text capture quality. The ocr application...

  • Page 87

    Smartvision – user guide (rev. 2.4)smart vision 1336 87 " from gallery ": select a document stored in the photo gallery on your smart vision . Character recognition will start instantly. Once the text is converted, you can browse it using the up " "and down " " keys on the keypad. You can press the ...

  • Page 88

    Smartvision – user guide (rev. 2.4)smart vision 1336 88 legal notice and warranty 1. Precautions for useand recommendations - handle your kapsys device and accessories with care, do not drop it or knock it - your device is equipped with a touchscreen, please use your fingers only - do not dismantle ...

  • Page 89

    Smartvision – user guide (rev. 2.4)smart vision 1336 89 limited warranty kapsys warrants to the purchaser that the product complies with the description thereof (as shown on www.Kapsys.Com website) in accordance with the provisions of articles l.211-1 et seq. Of the french consumer code. Kapsys warr...

  • Page 90

    Smartvision – user guide (rev. 2.4)smart vision 1336 90 5. About specific energy absorption rate your smart vision by kapsys is a radio transmitter/receiver. It was designed and manufactured to comply with the radiofrequency (rf) exposure thresholds recommended by the european union. The exposure st...

  • Page 91

    Smartvision – user guide (rev. 2.4)smart vision 1336 91 about this document information published in this document is liable to change without notice. Kapsys reserves the right to amend the contents of this document with no obligation to notify any person or entity whatsoever thereof. Kapsys cannot ...

  • Page 92

    Smartvision – user guide (rev. 2.4)smart vision 1336 92 troubleshooting prior to contacting the customer service, please read the recommendations below: - for optimal performance of your device, we recommend that you switch it off from time to time. - it is recommended to fully charge ( ) the batter...

  • Page 93

    Smartvision – user guide (rev. 2.4)smart vision 1336 93 sim card error / no phone feature can be accessed: - check if the sim card has been correctly inserted. - check if the chip on your sim card is not damaged or scratched. Unable to make outgoing calls: - make sure you have dialled a valid number...

  • Page 94

    Smartvision – user guide (rev. 2.4)smart vision 1336 94 about this document the information published in this document is liable to change without notice. Kapsys reserves the right to amend the contents of this document with no obligation to notify any person or entity whatsoever thereof. Kapsys can...