08 /2 00 3 isdn adaptor ia 12 ia 12 technical reference and user's guide.
Technical reference and user’s guide rev aaa ia12 isdn adaptor caution since ia12 isdn adaptor is an electronic-based product, the requirements below should be fulfilled, in order to utilize it with desired performance: the adaptor must not be disassembled by unauthorized persons in any way. The cov...
Technical reference and user’s guide rev aaa ia12 isdn adaptor ii iii preface chapters in this guide have been prepared in order to present detailed technical information to people who need hardware-based information about the ia12 isdn adaptor and instructing them for installation of the adaptor. B...
Technical reference and user’s guide rev aaa ia12 isdn adaptor technical introduction ia12 isdn is a euro-isdn bri compatible adaptor that serves as a converter between analog lines of the ms-series exchanges (ms48s, ms128, ms224) and isdn bri lines coming from local co (nt1). Technical specificatio...
Technical reference and user’s guide rev aaa ia12 isdn adaptor the following are present in the product package: - ia12 isdn adaptor, - ia12 isdn adaptor technical reference and user’s guide, - ia12 data cable, - ia12 installation template. Ia12 isdn adaptor is compatible with the entire software of...
Technical reference and user’s guide rev aaa ia12 isdn adaptor 5 6 cabling data line: the ia12 data cable comes with the ia12 isdn adaptor. Like the telephone data cable of the feature telephone sets and/or consoles, the data cable of ia12 also consists of two parts. One of them is a cable with 6-pi...
Technical reference and user’s guide rev aaa ia12 isdn adaptor the cable connections mentioned above is illustrated in the figure below: (the first channel of the exp-ia12 or the ia12 card must be connected to the line 01 or 03. Afterwards, if the first channel has been connected to line 01, then th...
Technical reference and user’s guide rev aaa ia12 isdn adaptor the programming is performed by the system supervisor (extension with number 11(11) by default) in the exchange to which ia12 is attached. In order for any program to be entered, first the exchange must be put into programming mode by th...
Technical reference and user’s guide rev aaa ia12 isdn adaptor 11 notes : • d should be an odd-numbered line. (example:01, 03,…). This program, which is entered for the line with number d, is considered to be entered for d+1 as well. Case 2: 80054 d p parameters: d : line number p : prefix that is a...
Technical reference and user’s guide rev aaa ia12 isdn adaptor 13 notes: • filter bit: if it is active, no comparison takes place between the isdn line numbers and the incoming calls, otherwise they are compared: it is required that the filter bit is active for the ddi isdn lines. The “filter bit” i...
Technical reference and user’s guide rev aaa ia12 isdn adaptor 15 16.
Technical reference and user’s guide rev aaa ia12 isdn adaptor 17 18.
