Kawasaki VN900 CLASSIC Installation Instructions

VN900 Classic/LT Gel Seats 

VN900 Custom Gel Seats 

Installation Instructions 

1. Remove the stock seat (see Vehicle Owner’s Manual). 

2. Remove the eight rubber dampener grommets from the underside of the seat pan and replace 

onto the Gel Seat in the same manner (lightly lubricate to ease installation). 

3. Remove the mounting brackets, washers and nuts from the seat pan and also remove the 

passenger hand hold strap. 

4. Replace the passenger hand hold strap, mounting brackets, washers and nuts onto the Gel Seat in 

the reverse order as you removed them.  Tighten firmly. 

5. Replace the seat onto the motorcycle in the normal way (see Vehicle Owner’s Manual) 

6. Clean the Gel Seat with a soft damp cloth.  Do not use hard abrasive cleaners.