Keating Of Chicago Bumper Guard 14 IFM SE Service Instructions

14 IFM SE BUMPER GUARD

Installation Instructions

www.keatingofchicago.com

1-800-KEATING

S E R V I C E   I N S T R U C T I O N S

BEFBumperGuard   6/04

Kit Includes:

Tools Needed:

Bumper Guard

7/16” socket & driver

7/16” open end wrench

part # 037532

CAUTION: During

assembly of Item B,

sides of cabinet should

be parallel. Clearance in

mounting holes on

cabinet sides, leg

channels and bumper

guard will allow

adjustment when

attaching hardware.

Tighten bolts and nuts

at the end of installation.

View A-A

B

C

(Qty 4)

A (Qty 4)

View A-A

Rear view of

fryer

Instructions:

1. Remove bolts (A) and nuts (C) in rear of fryer using socket and wrench.

2. Remove bar currently in place (1/4”x1” bar stock).

3. Install bumper guard (B) in place of bar stock as shown above.

4. Reinstall bolts, nuts and spacers (A and C). NOTE: Keep loose until all four are in place.

5. Tighten bolts and nuts using socket and wrench.

Qty.

Description

A 4

Bolt 

1/4-20

B

1

Bumper Guard

C 4

Nut 

1/4-20

A and C

(Qty 4)

Spacers

Cabinet Side

Leg Channel

Enlarged View