Hardened media converter 1 quick start guide this quick start guide describes how to install and use the hardened media converter. T his is the media converter of choice for harsh environments constrained by space. Physical description the terminal block and power inputs y dc terminal block power in...
Hardened media converter 2 the following lists the pinouts of 1000base-t port. The 1000basesx/lx connections the fiber port pinouts: the tx (transmit) port of device i is connected to the rx (receive) port of device ii, and the rx (receive) port of device i to the tx (transmit) port of device ii..
Hardened media converter 3 the port status leds leds state indication steady power redundant system or ports function abnormally fault off power redundant system and ports function normally steady power on pwr stands for power pwr1 pwr2 off power off steady a valid network connection established for...
Hardened media converter 4 functional description y meets nema ts1/ts2 environmental requirements: temperature, shock, and vibration for traffic control equipment. Y meets iec61000-6-2 emc generic standard immunity for industrial environment. Y support 802.3ab/802.3z/802.3x. Auto-negotiation and aut...
Hardened media converter 5.
Hardened media converter 6 preface our hardened media converter provides an affordable solution for rugged environments, transportation road-side cabinets, industrial shop floors, multi tenant dwellings or fiber to the home (ftth) applications. Capable of operating at temperature extremes of -40°c t...
Hardened media converter 7 table of contents quick start guide.......................................................................1 p hysical d escription ...........................................................1 f unctional d escription .......................................................4...
Hardened media converter 8 introduction the media converter provides one channel for media conversion between 1000base- t and 1000base-sx/lx with the link-fault-pass-through function. This hardened fiber optic solution is perfectly suitable for industrial applications or rugged environmental conditi...
Hardened media converter 9 y field wiring terminal: use copper conductors only, 60/75℃, 12-24 awg torque value 7 lb-in. Y -40 to 75 ( ℃ ℃ -40℉ to 167℉) operating temperature range. Tested for functional operation @ -40 to ℃ 85 ( ℃ -40℉ to 185℉). Ul1604 industrial control equipment certified maximum ...
Hardened media converter 10 one-channel media converter ports the converter provides one copper port and one fiber port. The fiber port provides options of multi-mode, single-mode, or wdm single-mode fiber using an sc connector. The copper port uses rj-45 connector, auto-mdix, and auto negotiates. P...
Hardened media converter 11 front panel & leds led indicators the led indicators give you instant feedback on converter status: led’s state indication steady power redundant system or ports function abnormally fault off power redundant system and ports function normally steady power on pwr stands fo...
Hardened media converter 12 installation this chapter gives step-by-step installation instructions for the converter. Selecting a site for the equipment as with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic in...
Hardened media converter 13 connecting to power redundant dc terminal block power inputs or 12vdc dc jack: 12vdc dc jack step 1: connect the supplied ac to dc power adapter to the receptacle on the topside of the media converter. Step 2: connect the power cord to the ac to dc power adapter and attac...
Hardened media converter 14 field wiring terminal: use copper conductors only, 60/75℃, 12-24 awg torque value 7 lb-in. Alarms for power and port failure step 1: there are two pins on the terminal block that are used for power failure detection. It provides a normal closed output when the power sourc...
Hardened media converter 15 specifications applicable standards ieee 802.3ab 1000base-t ieee 802.3z 1000base-sx/lx fixed ports 1 copper port, 1 fiber port 2000mbps for full-duplex speed 1000base-t 1000base-sx/lx 2000mbps for full-duplex forwarding rate 1,488,000pps for 1000mbps 4-pair utp/stp cat. 5...
Hardened media converter 16 nema ts1/2 environmental requirements for traffic control equipment.
