1. DL manuals
  2. L-Shine
  3. Monocular
  4. LS-650
  5. Instruction Manual

L-Shine LS-650 Instruction Manual

Manual is about: multifunctional night vision 6X50

Summary of LS-650

  • Page 1

    L-shine ls-650 multifunctional night vision 6x50 instruction manual.

  • Page 2: Contents

    Contents about ls-650 multifunctional night vision 3 parts and controls guide 4 how digital night vision works 4 controls / functions 5-8 setup and basic operation 8-10 other operations/ features 10-12 display icons 11 technical specifications 19 one year limited warranty 20

  • Page 3

    About ls-650 multifunction night vision thanks for purchasing of our ls-650 multifunctional night vision. Comprised of high quality electronics and optics, the ls-650 multifunctional night vision is a portable digital night vision viewing system that utilizes an infrared sensitive cmos sensor, provi...

  • Page 4

    Video:1280x720@20fps build-in clock built-in tripod mountable water resistance standard ipx4 resistant bright light exposure wide range of operating temperature tf card: up to 32g(no included) magnification(optical): 6 intuitive easy-to-use interface how digital night vision works ls-650 multifuncti...

  • Page 5

    Controls/ functions parts and controls guide observe battery polarity marks inside battery compartment when inserting batteries, and ensure polarity marks on cap match polarity in battery compartment when replacing cap (+ to + and - to -). Under interface cover flap side mount hole bottom mount hole.

  • Page 6

    Power button (a) the power button (power icon) turns the unit on or off. • press and hold the power button for 2 seconds to turn the unit on • press and hold the power button for 2 seconds to turn the unit off digital zoom buttons (b) the “+” and “-” buttons adjust the digital zoom power, with a ran...

  • Page 7

    • press the “ir” button again to switch off the ir led light. “ir0” will be shown at the lower center of the display.、 switching off the ir led when ambient light levels are adequate for viewing without it (full moon, near streetlights, etc.) will extend battery life and running time. Press the “ir”...

  • Page 8

    7 record button (f) the record button is used to capture still photos or videos of the image being viewed, dependent on the setting of the photo/video switch. The photos and/or videos are stored on a (user supplied) micro sd card, with up to 32gb capacity. The unit has no internal memory. • when the...

  • Page 9

    8 video output jack (g): the “live” image as seen on the unit’s display is output here. Connect the included video cable (1/8” to rca) (3.5mm) between this jack and a video monitor or recorder to remotely view or record the image from the night vision unit. Setup and basic operation 1) load batterie...

  • Page 10

    9 the ls-650 is ready to be installed on a rifle and to be zeroed. After first installation of your ls-650 on a rifle, please follow instructions in the section “zeroing”. 3)remove lens cover, adjust display (eyepiece) focus for your vision press the power button (a) to turn on the unit. A battery l...

  • Page 11

    10 if the image is not sharp, rotate the objective lens barrel (l) to change the focus until the subject appears sharp. 5)enter into setup menu interface press brightness level (e) switch and held for 2 seconds to enter the setup menu interface.The setup menu includes the following options: choice o...

  • Page 12

    11 display icons 1 “#####”, photo count when the device in photo mode,the number of photos reminding(memory available)will be displayed. 2 “00:00:00,” -reminding recording time when the device in video,and not recording, the remind recording time will be displayed (hrs/ min/sec). -relapse recording ...

  • Page 13

    12 • resolution: press “-” button (b) and enter into adjust interface, press ir button (c) to choose your favorable resolution: 2592x1944, 640x480. 2592x1944 would be much clearer but 640x480 would take less storage space. After choosing, press the record button (f) to confirm or “+” button (b) to d...

  • Page 14

    13 • date &time: press “-” button (b) to check the default time & date, if need to adjust, press the “-” button (b) enter into adjust interface, press ir button (c) to select year/month/day/hour/minute then press “-” button (b) enter for choosing the right number, after that, press the record button...

  • Page 15

    14 • usb: press “-” button (b) enter into setting interface, press ir button (c) choose msdc or pccam then press record button (e) to confirm and exit. Other operations/features • auto power off if a button has not been pressed for 10 minutes, the display screen will drop to 50% brightness level. If...

  • Page 16

    15 constantly, press and hold the ir button for 3 seconds. Repeat to switch back to auto icon overlay (only visible for 10 sec. Max following the use of a button). • using the digital zoom press the “+” button (b) to zoom in. Press the “-” button (b) to zoom out. Hold the button down to zoom in/out ...

  • Page 17

    16 disqualify it from proper use. Check the sturdiness and proper fit of the mounting system. Ensure that the objective lens and eyepiece are free of cracks, grease spots,dirt, water stains and other residue before use. Visually inspect the condition of the battery and the battery compartment; the b...

  • Page 18

    17 technical maintenance technical maintenance should be done at least twice a year, includes the following steps: • clean the outside metal and plastic surfaces from dust, dirt and moisture;wipe the scope with a soft lint free cloth. • clean the battery compartment's electric contact points using a...

  • Page 19

    18 observed image is too bright the ambient light level is too high, and/or the ir light is at 100% level (ir3). 1. If you are using the ir light, press the ir button (c) to select a lower illumination level (ir2 or ir1). 2. Turn off the unit or place the objective lens cover over the lens. Observed...

  • Page 20

    19 technical specifications magnification (optical) 6x battery type 4xaa,lithium,alkaline or nimh digital zoom 5 battery runtime (ir off) 4 hours in-view display 1.5” tft battery runtime (ir on) 3 hours field of view @ 100 yds/m 20.5ft/6.8m built-in 2tripod mountable yes objective lens 50mm weaver r...

  • Page 21

    20 one year limited warranty your lshine product is warranted to be free of defects in materials and workmanship for one year after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage ...

  • Page 22: Ls-650

    Ls-650 l-shine (0086)0769-86836877 www.Lshine.Com.