Lancom GS-2310 Quick Reference Manual
TECHNIC
AL D
A
T
A
LANCOM, LANCOM S
ystems and L
COS ar
e r
egister
ed tr
ademarks. All other names or descriptions used may be tr
ademarks or r
egister
ed
trademarks of their owners. Subject to change without notice. No liability for technical err
ors and/or omissions. 111730/1217
Hardware
Power supply
Internal power supply unit (110–230 V, 50-60 Hz)
Power consumption
max. 7.9 watts
Environment
Temperature range 0–40 °C; humidity 10–90 %; non-condensing
Housing
Robust metal housing with screw-on 19“ mounting brackets, network connectors on the front
Number of fans
None; fanless design without rotating parts, high MTBF
Interfaces
ETH
A
8 TP Ethernet-Ports 10 / 100 / 1000 Mbps
A
2 Combo-Ports (TP / SFP) 100 / 1000 Mbps (SFP) and 10 / 100 / 1000 Mbps (TP)
A
10 concurrent ports in total
Declaration of Conformity
Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.lancom-systems.
com/ce/
Package content
Manual
Quick Reference Guide (DE/EN), Installation Guide (DE/EN), Cloud-ready sheet, FCC sheet
Mounting brackets
Two 19” brackets for rackmounting
Cable
IEC power cord, serial configuration cable 1.5 m
MOUNTING AND CONNEC
TING THE DEVICE
d
SFP ports
Off
Port inactive
Green
Link 1000 Mbps
Orange
Link ≤ 100 Mbps
c
TP Ethernet ports
Off
Port inactive
Green
Link 1000 Mbps
Orange
Link ≤ 100 Mbps
b
Reset button
5 seconds pressed
Device restart
10 seconds pressed
Device reset and restart
a
System
Off
Device switched off
Green
Device operational
a
b
c
Console
Reset
System
LANCOM GS-2310
a
Serial connector (Console)
Connect the serial interface via the included serial configuration
cable to the serial interface of the device you want to use for
configuring / monitoring the switch.
b
TP Ethernet ports
Connect one of the TP Ethernet ports 1-10 via an Ethernet cable to
your end device or another LAN switch.
c
SFP ports
Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-
LX) into the SFP port. Choose a cable compatible with the SFP
module and connect it as described in the module’s
documentation.
d
Power connector (on the back side of the device)
Supply power to the device via the power connector on the
back. Please use the supplied IEC power cable.
4
Please observe the following when setting up the device
A
Do not rest any objects on top of the device and do not stack
multiple devices
A
For devices to be operated on the desktop, please attach the
adhesive rubber footpads
A
Keep the ventilation slots on the side of the device clear of obstruction
A
Mount the device into a 19” unit in a server cabinet
Ports 9 and 10 are combo ports. Either the TP- or the SFP port can be used at the same time.
5
LANCOM 1681V
Power
VDSL
Online
ETH
1
ETH 2
VP
N
ETH
3
ETH 4
ISDN Statu
s
Cloud-ready
D
Console
Reset
System
LANCOM GS-2310
b
c
d
a
LANCOM GS-2310
Quick Reference Guide