Land Pride AFM4522 Features And Benefits
All Flex Mowers
Features and Benefits
Designs, specifications, features and information are subject to change without notice.
5
AFM4522 Model
Features
Benefits
Counter rotation on left hand deck
Spreads grass clippings more evenly. Wing decks throw grass away from the rear
deck. Rear deck doesn’t get covered up nor does it get bogged down by cut grass.
Narrow 9’-6” transport width
Transport width allows unit to be transported with ease.
4 1/2” Deck overlap
Eliminates blade skips when turning. Tighter turns can be made.
Sleek frame design, including single
beam hitch and compact deck overlap
Design allows operator to make tighter turns without leaving windrows and skips.
The AFM virtually becomes a zero turn mower.
Automatic transport wing locks
When wings are raised in the full transport position, the wings lock in place. No
need to get off the tractor to lock. Pull rope from tractor seat to un-lock.
P27560SR Transport tires
with tapered bearings
Large Transport tires offer smooth roading and less grass compaction. Allows
grass to stand up. Tapered roller bearings offer longevity.
Removable transportation tire spindles
Allows a spindle to be replaced by simply removing two bolts.
Back wheels on side decks even with
transportation tires
Allows tighter turns without skips.
Rigid rear side deck tires
Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.
Large deck flotation tires with sealant
Optional 15” tires for great flotation or 18” tires for even greater flotation. The larger
the tire the less compaction in pounds per square inch allowing grass to stand up.
Sealant in the tires minimizes flats.
1/4” Gauge wheel arms
Gives the cutter gauge wheel arms a great deal of “hidden” strength.
Low pivot points on deck
The lower the pivot points are to the ground, the more side to side swing, allowing
for excellent flotation from each deck.
Deflectors built into mower decks
Safety features meet ANSI standards. Many competitors use chains for protection.
Once chains are removed the unit may not meet ANSI specifications.
Rear discharge
Even dispersal, discharged items are always aimed downward. No rear chains are
needed, which tend to clump damp grass.
Cat. 4 CV main driveline
Constant velocity main driveline allows for tighter turns without harming U-joints in
driveline.
Cat. 3 slip-clutch wing drivelines
Reduces start-up torque that is put on the driveline, gearbox and gearbox support.
Slip clutch protection
Guards against premature gearbox failure. Protects mower deck spindles.
Heavy center gearbox mounting plate
Handles start up torque.
Gearbox HP Rating
65 - 100 HP
Gearbox warranty
S/N 368187- one year on all gearbox components
S/N 368188+ 5 years on gearbox housing, gears and shafts, 3 years on bearings
and seals on gearbox.
Easy to grease blade spindles
No guards to remove for routine greasing of blade spindles.
Middle spindle sits towards the
back of the mower deck
Uses less horsepower and allows material to escape the mower deck easier. The
discharge of the material is more even. Design eliminates windrowing.
Spring loaded idlers
Applies constant tension to belt to run efficiently.
Easy belt tension release
Easily release belt tension for changing belt or for winter storage.
High blade tip speed
(18,498 fpm) Lifts the grass up for a clean cut and efficient discharge of material.
Tip rates as high or higher than the competition.
Choice of Blade
(Medium lift standard)
Others available thru parts dept.
Low Lift - Highly recommended in sandy soils where lifting isn’t crucial. Disturbs
the soil very little, allowing blades to wear longer.
Medium Lift - Medium suction for lifting grass. Requires less HP than high lift.
High Lift - Greatest suction for lifting grass before cutting. Can take higher HP in
tall dense grass. Not recommended in sandy soils.
Mulching - Perfect for leaf mulching.
315-360F
11/14/08