Land Pride All-Purpose Seeder APS Series Datasheet

7

ALL-PURPOSE SeedeR

We’ve incorporated many of 

our standard seeding features 

into the All-Purpose Seeder. 

Seedbox– The all welded 

seedbox creates strength for 

the seeder. The watertight 

lid helps keep the elements 

out and your seed dry.  The 

seedbox also has a seed 

splashplate to keep seed out of the hinge area of the lid.  A paddle 

type agitator is also included in the seedbox to keep seed from 

bridging, and allowing an uninterrupted flow to the seed cups.  At 

one bushel per foot, the capacity is just right for landscaping size 

projects. 

Seedcups– We’ve been using our seed cups on seeders and 

grain drills for many years. This cup is the standard of the seeding 

industry, and you can easily see why when you look at the fluted 

metering device and see how it grabs the same amount of seed 

•  All welded seedbox construction

•  Watertight lid to keep seed dry

•  Single lever for adjusting  

  front rollers

APS

SERIES

Cat. 1 — 4’   6’

We know seeders, and our new All-Purpose Seeder is a great 

addition to our Primary Seeder and Overseeder group!

This 3-point turf seeder, available in 4’ and 6’, is a ground  

driven seeder for tractors with a horsepower range up to 45 hp.  

Designed to work ideally in a prepared seedbed and  

overseeding, this can be the perfect tool for any landscaper.

NeWSeedING

While seeding into a freshly prepared site, the front angling rollers 

help cut through the top crust, kicking up a light amount of soil,  

making sure the ground is soft.  The seed is then dropped, and 

compressed by the rear roller.  Establishing this initial seed to soil 

contact is essential in achieving a high rate of germination.

OVeRSeedING

          The All-Purpose Seeder is an ideal overseeder for several  

         reasons.  One, it is ground driven which takes some of the burden  

        away compared to a powered overseeder;  You don’t have a  

       driveline and related drivetrain components to maintain, and, two, 

the front rollers are adjustable to various levels of aggressiveness.  

By adjusting the front two rollers, you can control how aggressive 

you want to be in the existing turf you are overseeding.  If the 

existing turf is fairly sparse,  go light on the angle of the rollers so 

some dirt is kicked up, but the existing turf is not torn up.  If the 

existing turf is thick, the front two rollers can be set quite aggressive 

to work through thatch and dead grass build up, allowing the seed 

to drop closer to the soil.

QUALITYLANdPRIdeFeATUReS

all of the time. This results in excellent accuracy, 

and money saving efficiency.

Rollers–The heat treated steel spikes 

engage the ground to keep the rollers turning, 

agitate the soil, aerate existing turf, promote 

seed to soil contact, and then the rear roller 

compresses the soil.

SpringLoadedRearRoller– The spring loaded rear roller ensures 

that the roller will stay on the ground, even in rough conditions.  

With the rear roller being connected directly to the seed cups, it is 

important that it is not interrupted so to minimize seeding skips.  By 

being spring loaded, the possibility of skips is greatly diminished.  

LiftHooks– Lift Hooks are 

conveniently located on both 

sides of the seedbox to aid in 

lifting the seeder on and off 

the trailer. 

The perfect tool for

any landscaper.