Land Pride DH25 Series Datasheet

27

•  Cat. 1 & 2 hitch

•  20” or 22” Notched blades

•  3” Square frame tube

•  7-1/2” Blade spacing

•  Angle front and rear gangs up to 21 degrees

•  Adjustment handle to aid in angling

•  1/2” Thick bearing hangers with two 5/8” U-bolts

•  Self aligning, sealed ball bearings

•  1-1/8” Square, high carbon steel gang axle

•  4” x 3” Gang tube

•  Optional disc scrapers are adjustable

•  Optional 9” center sweep shank

DH25 

SERIES

40 - 100 HP —  72”   96”

Heavy-duty 1/2” thick bearing 

hangers resist the high torque 

from two 5/8” U-bolts.

Disc scrapers are 

available to reduce 

build-up on discs.

* Wider cutting may be obtained by adjusting 

complete gang on gang tube.  Adjusting too wide 

can leave strip in center of unit. Center sweep can 

help alleviate this.